Wheeled Crane AMD 0001: NAICS/PSC Update

Active

Contract Opportunity

Wheeled Crane: Engine: must have a 3.8L CUMMINS engine Cooling: must have a conventional coolant cooling system Cylinders: must be at least a 4-cylinder engine Performance (hp): must have at least 130 Hp @2500rpm Torque: must have at least 360 Ft.Lb. @1600rpm DEF: must not require DEF Fuel: must use Diesel fuel Transmission: must have Powershift 4-speed forward, 3-speed reverse Drive system: must be 4-wheel drive Axles: must be ridged mounted to frame and have planetary hubs and limited slip differentials. Tire size and kind: must have 385/65R 22.5 High Traction radial tires Service brake: must have 4-wheel full hydraulic internal multi-wet disc brakes for front and rear axles Parking brake: must have a mechanically applied disc type parking brake on front axle Steering system: must have 4-wheel steering with selectable 4-wheel circle, 4-wheelcrab and 2-wheel front steering Hydraulic system: must have a single load sensing axial piston pump and a hydraulic reservoir with a visible fluid level sight glass Lights: Must have a full LED lighting package for front and rear of Crane Fuel: must be diesel Counterweight: Must be a 1-piece cast type bolted to turn-table Operator?s Station: must be chassis mounted cab shell with roof safety glass, deluxe seat, A/C and Heat, dash mounted mechanical lever proportional controls, electric horn, engine gauge package, fire extinguisher, sight level bubble, 360-degree continuous rotation with worm and gear drive on ball bearing swing circle. Must have back-up camera. Must have 360 degree swing lock. Must have back-up alarm. Outriggers: must have front and rear oblique type beams at all 4-corners with nylon wear pads and hydraulic holding valves with independent control valves

Attachments/Links