Welding Consumables

SOLICITATION NO: 40023-S27001

ISSUE DATE: May 14, 2026

* FILL IN VENDOR NAME AND

ADDRESS ABOVE BEFORE SUBMITTING

1 ADDRESS ALL INQUIRIES AND CORRESPONDENCE TO THE BUYER AT THE PHONE AND ADDRESS SHOWN ABOVE.

2 BID FORMS: ALL WRITTEN BIDS, UNLESS OTHERWISE PROVIDED FOR, MUST BE SUBMITTED ON AND IN ACCORDANCE WITH, FORMS PROVIDED, PROPERLY SIGNED BIDS.

3 BIDS MUST BE RECEIVED AT THE ADDRESS SPECIFIED IN THE SOLICITATION PRIOR TO BID OPENING TIME IN ORDER TO BE CONSIDERED. BID OPENING: BIDDERS MAY ATTEND THE BID OPENING, BUT NO INFORMATION OR OPINIONS CONCERNING THE ULTIMATE CONTRACT AWARD WILL BE GIVEN AT THE BID OPENING OR DURING THE EVALUATION PROCESS. BIDS MAY BE EXAMINED WITHIN 72 HOURS AFTER BID OPENING.

4 AWARDS: NTCC RESERVES THE RIGHT TO AWARD ITEMS SEPARATELY, GROUPED OR ON AN ALL-OR-NONE BASIS AND TO REJECT ANY OR ALL BIDS AND WAIVE ANY INFORMALITIES. NTCC RESERVES THE RIGHT TO REMOVE LINE ITEMS FROM THE AWARD WITH 30 DAY NOTICE WHEN IT IS DEEMED TO BE TO THE BEST INTEREST OF THE STATE.

5 PRICES: UNLESS OTHERWISE SPECIFIED BY NTCC IN THE SOLICITATION, BID PRICES MUST BE COMPLETE, INCLUDING TRANSPORATION/SHIPPING PREPAID BY BIDDER TO DESTINATION AND FIRM FOR ACCEPTANCE FOR A MINIMUM OF 30 DAYS. PRICES SHOULD BE QUOTED IN THE UNIT (EACH, BOX, CASE, ETC) AS SPECIFIED IN THE BID.

6 DESCRIPTIVE INFORMATION: BIDDERS PROPOSING AN EQUIVALENT BRAND OR MODEL SHOULD SUBMIT WITH THE BID INFORMATION (SUCH AS ILLUSTRATIONS, DESCRIPTIVE LITERATURE, AND TECHNICAL DATA) SUFFICIENT FOR NTCC TO EVALUATE QUALITY, SUITABILITY, AND COMPLIANCE WITH THE SPECIFICATIONS IN THE SOLICITATION. FAILURE TO SUBMIT DESCRIPTIVE INFORMATION MAY CAUSE BID TO BE REJECTED.

7 CONTRACT RENEWALS: UPON AGREEMENT OF NTCC AND THE CONTRACTOR, A TERM CONTRACT MAY BE EXTENDED FOR 2 ADDITIONAL 12-MONTH PERIODS AT THE SAME PRICE, TERMS AND CONDITIONS. THE TOTAL CONTRACT TERM CANNOT EXCEED 36 MONTHS.

8 NTCC RESERVES THE RIGHT TO CANCEL THIS CONTRACT WITH A THIRTY (30) DAY WRITTEN NOTICE.

Preferences: IN ACCORDANCE WITH LOUISIANA REVISED STATUTES 39:1595, A PREFERENCE MAY BE ALLOWED FOR PRODUCTS MANUFACTURED, PRODUCED, GROWN, OR ASSEMBLED IN LOUISIANA OF EQUAL QUALITY.

DO YOU CLAIM THIS PREFERENCE? YES _____________________ NO ________________

SPECIFY THE LINE NUMBERS: _____________________________________________________

SPECIFY LOCATION WITHIN LOUISIANA WHERE THIS PRODUCT IS MANUFACTURED, PRODUCED, GROWN OR ASSEMBLED: _______________________________________________________________________________

DO YOU HAVE A LOUISIANA BUSINESS WORKFORCE? YES: _______ NO _____________

IF SO, DO YOU CERTIFY THAT AT LEAST 50% OF YOUR LOUISIANA WORKFORCE IS

COMPRISED OF RESIDENTS OF LOUISIANA? YES: _____________ NO: ______________

FAILURE TO SPECIFY ABOVE INFORMATION MAY CAUSE ELIMINATION FROM PREFERENCES

BIDDERS REPRESENTATION:

IN MAKING YOUR BID, EACH BIDDER REPRESENTS THAT: YOU HAVE READ AND UNDERSTOOD THE BID DOUCMENTS AND YOU BID HAS BEEN MADE IN ACCORDANCE HEREWITH: YOU HAVE VISITED THE SITE, IF REQUIRED, AND HAVE FAMILIARIZED YOURSELF WITH THE LOCAL CONDITIONS UNDER WHICH THE WORK IS TO BE PERFORMED.

BY SIGNING AND SUBMITTING ANY BID FOR $25,000 OR MORE, THE BIDDER CERTIFIES THAT THEIR COMPANY, ANY SUBCONTRACTORS, OR PRINCIPALS ARE NOT SUSPENDED OR DEBARRED BY THE GENERAL SERVICES ADMINISTRATION (GSA) IN ACCORDANCE WITH THE REQUIREMENTS IN “AUDIT REQUIREMENTS IN SUBPART F OF THE OFFICE OF MANAGEMENT AND BUDGET’S UNIFORM ADMIINISTRATIVE REQUIREMENTS, COST PRINCIPLES, AND AUDIT REQUIREMENTS FOR FEDERAL AWARDS” (FORMERLY OMB CIRCULAR A-133). A LIST OF PARTIES WHO HAVE BEEN SUSPENDED OR DEBARRED CAN BE VIEWED AT WWW.SAM.GOV .

ANY ORDERS RESULTING FROM THIS SOLICITATION WILL BE PAID WITH FY 27 FUNDS, IF APPROPRIATED BY THE LEGISLATURE. DELIVERY CANNOT BE MADE PRIOR TO JULY 1, 2026 AND YOUR BID PRICES MUST BE FIRM FOR ACCEPTANCE AT DELIVERY ACCORDINGLY.

THE QUANTITIES ARE ESTIMATED TO BE THE AMOUNT NEEDED. IN THE EVENT A GREATER OF LESSER QUANTITY IS NEEDED, THE RIGHT IS RESERVED BY THE STATE OF LOUISIANA TO INCREASE OR DECREASE THE AMOUNT, AT THE UNIT PRICE STATED IN THE BID.

IN AN EFFORT TO INCREASE EFFICIENCIES AND EFFECTIVENESS, AS WELL AS BE STRATEGIC IN UTILIZING TECHNOLOGY AND RESOURCES FOR THE STATE AND VENDORS, THE STATE INTENDS TO MAKE ALL PAYMENTS TO VENDORS ELECTRONICALLY. THE LaCARTE PROCUREMENT CARD WILL BE USED FOR PURCHASES OF $5,000 AND UNDER, AND WHERE FEASIBLE, OVER $5,000. VENDORS WILL HAVE A CHOICE OF RECEIVING ELECTRONIC PAYMENT FOR ALL OTHER PAYMENTS BY SELECTING ELECTRONIC VENDOR PAYMENT SOLUTION (EVP) OR ELECTRONIC FUNDS TRANSFER (EFT). IF YOU RECEIVE AN AWARD AND DO NOT CURRENTLY ACCEPT THE LaCARTE CARD OR EVP, OR HAVE NOT ALREADY ENROLLED IN EFT, YOU WILL BE ASKED TO COMPLY WITH THIS REQUEST BY CHOOSING ONE OF THE FOLLOWING THREE OPTIONS. YOU MAY INDICATE YOUR ACCEPTANCE BELOW.

THE LaCARTE PROCUREMENT CARD USES A VISA CARD PLATFORM. VENDORS RECEIVE PAYMENT FROM STATE AGENCIES USING THE CARD IN THE SAME MANNER AS OTHER VISA CARD PURCHASES. VENDORS CANNOT PROCESS PAYMENT TRANSACTIONS THROUGH THE CREDIT CARD CLEARINGHOUSE UNTIL THE PURCHASED PRODUCTS HAVE BEEN SHIPPED AND RECEIVED, OR THE SERVICES PERFORMED.

FOR ALL STATEWIDE AND AGENCY TERM CONTRACTS:

• UNDER THE LaCARTE PROGRAM, PURCHASE ORDERS ARE NOT NECESSARY. ORDERS MUST BE PLACED AGAINST THE NET DISCOUNTED PRODUCTS OF THE CONTRACT. ALL CONTRACT TERMS AND CONDITIONS APPLY TO PURCHASES MADE WITH LaCARTE.

• IF A PURCHASE ORDER IS NOT USED, THE VENDOR MUST KEEP ON FILE A RECORD OF ALL LaCARTE PURCHASES ISSUED AGAINST THIS CONTRACT DURING THE CONTRACT PERIOD. THE FILE MUST CONTAIN THE PARTICULAR ITEM NUMBER, QUANTITY, LINE TOTAL AND ORDER TOTAL. RECORDS OF THESE PURCHASES MUST BE PROVIDED TO THE OFFICE OF STATE PROCUREMENT UPON REQUEST.

EVP METHOD CONVERTS CHECK PAYMENTS TO A VISA CREDIT CARD, THEREBY STREAMLINING PAYMENTS TO YOUR ORGANIZATION. PARTICIPANTS RECEIVE A CREDIT CARD ACCOUNT NUMBER WITH UNIQUE SECURITY FEATURES. THIS CARD WILL HAVE $0 AVAILABLE FUNDS UNTIL AN INVOICE IS APPROVED FOR PAYMENT. AS PAYMENTS ARE APPROVED, ELECTRONIC REMITTANCE NOTIFICATIONS ARE SENT VIA EMAIL ALONG WITH APPROVAL TO CHARGE THE CARD FOR THAT AMOUNT. EVP REQUIRES NO CHANGE TO CURRENT INVOICE PROCEDURES; IT IS SECURE, AND DOES NOT REQUIRE YOUR BANK INFORMATION.

EFT PAYMENTS ARE SENT FROM THE STATE’S BANK DIRECTLY TO THE PAYEE’S BANK EACH WEEKDAY. THE ONLY REQUIREMENT IS THAT YOU HAVE AN ACTIVE CHECKING OR SAVINGS ACCOUNT AT A FINANCIAL INSTITUTION THAT CAN ACCEPT AUTOMATED CLEARING HOUSE (ACH) CREDIT FILES AND REMITTANCE INFORMATION ELECTRONICALLY. ADDITIONAL INFORMATION IS AVAILABLE AT:

http://www.doa.louisiana.gov/OSRAP/EFTfor Website.pdf

http://www.doa.louisiana.gov/ERP/pdfs/LaGov%20AP-03%20-%20-20EFT%20Vendor%20Enrollment%20Form.pdf

http://www.doa.louisiana.gov/OSRAP/EFTfor Website.pdf

IF AN AWARD IS MADE TO YOUR COMPANY, PLEASE CHECK Payment Type Will Accept Already Enrolled

WHICH OPTION YOU WILL ACCEPT OR INDICATE IF YOU ARE LaCarte _______ ______

ALREADY ENROLLED EVP _______ ______

EFT _______ ______

________________________________________

Printed Name of Individual Authorized

_________________________________________ ______________________

Authorized Signature for payment type chosen Date

_______________________________________________

Email address and phone number of authorized individual

PRICE SHEET: _______________________ ___ INVITATION TO BID # 40023-S27001

COMMODITY DESCRIPTION ____________________________ QUANTITY __ UNIT UNIT PRICE ______EXTENDED PRICE

MOST ITEMS ARE BRAND SPECIFIC – NO SUBSTITUTIONS UNLESS NOTED

PLEASE READ THE NOTES CAREFULLY BEFORE SUBMITTING YOUR BID

NOZZLES

1. CKW 53N87 PER EA _______________ _______________

3/4” LARGE #12 ALUMINA GAS LENS TIG NOZZLE

2. CKW 53N88 PER EA _______________ _______________

5/8” x 1-7/8” #10 ALUMINA GAS LENS NOZZLE

3. CKW 54N14 PER EA _______________ _______________

#8 ½” ALUMINA NOZZLE CUP

4. CKW 54N16 PER EA _______________ _______________

3/8” X 1-5/8” ALUMINA CUP (3AG6)

5. CKW 57N74 PER EA _______________ _______________

1/2" x 1-5/8” LARGE #8 ALUMINA GAS LENS

TIG NOZZLE

6. CKW 57N75 PER EA _______________ _______________

#6 3/8” ALUMINA NOZZLE CUP

7. 401-6-62 TREGASKISS NOZZLE PER EA _______________ ________________

8. KP2742-1-62R LINCOLN MAGNUM PRO NOZZLE PER EA _______________ ________________

9. KP2743-1-62RA LINCOLN MAGNUM PRO 550A GAS PER EA ________________ ________________

NOZZLE

10. KP2742-1-62R LINCOLN MAG PRO 250/350A PER EA _________________ ________________

NOZZLE

11. D3GS418-P CKW STANDARD GAS SAVER KIT PER EA _________________ _________________

1/8 3 SERIES

12. LINCOLN KP2743-1-62RA 550 NOZZLE .625 ID,

1/8R LINKP2743-162RA

INSULATORS

13. CKW 54N63 PER EA _______________ ________________

TEFLON HEAT SHIELD LARGE GAS LENS INSULATOR

14. KP2773-2 LINCOLN MAGNUM PRO INSULATOR – 350A PER EA _______________ ________________

15. KP2773-1 LINCOLN MAGNUM PRO INSULATOR – 550A PER EA ________________ ________________

16. TWECO 1320-1125 NOZZLE INSULATOR PER EA ________________ ________________

17. KP2744-035T LINCOLN COPPER PLUS .035 MIG CONTACT TIP PER EA _________________ _________________

18. KP2744-045T LINCOLN COPPER PLUS

CONTACT TIP – 350A TAPERED .045 IN PER EA _________________ _________________

19. KP2745-035AT LINCOLN COPPER PLUS PER EA _________________ _________________

CONTACT TIP – 550A ALUMINUM TAPERED .035 IN

20. CK 54N63 INSULATOR (2/PK) CKW54N63 PER EA ________________ _________________

CONTACT TIPS

21. MILLER PLASMA 249929 PER EA _______________ _______________

MILLER XT60 60 AMP TIP

22. WYPO #1 PER EA _______________ ________________

STANDARD TIP CLEANER KIT

23. TRE403-20-45-25 TREGASKISS .045 PER EA ________________ _________________

CONTACT TIP

24. KP2744-035 LINCOLN MAGNUM PRO .035 PER EA ________________ _________________

CONTACT TIP

25. KP2744-045 LINCOLN MAGNUM PRO .045 PER EA ________________ _________________

CONTACT TIP

26. KP2744-364A LINCOLN MAGNUM PRO PER EA ________________ _________________

CONTACT TIP – 350A ALUMINUM 3/64 IN

27. LINCOLN .045 CONTACT TIP 10/PK LINKP2744-045 PER EA _________________ _________________

DIFFUSERS

28. TRE404-26 TREGASKISS TOUGH LOCK PER EA _______________ _______________

RETAINING HEAD

29. KP2747-1A LINCOLN MAGNUM PRO DIFFUSER PER EA _______________ ________________

550A, THREAD ON, ALUMINUM

30. LINCOLN DISFFUSER FOR ALUM KP2747-1A AL. PER EA _______________ ________________

PRO GUN

CONNECTORS

31. LENCO 07020 PER EA _______________ _______________

MODEL L-120 SOLDER TYPE CABLE LUG

FOR #1-2/0 CABLE

32. WESTERN 112 ACETYLENE Y CONN. W/VALVES (YV-51) PER EA ________________ _______________

WES112

33. WESTERN OXYGEN Y CONNECTION W/VALVES (YV-50) PER EA ________________ ________________

WES111

34. WELDCRAFT WP-17FV-25-R TIG TORCH A-150FV, W/25” PER EA _________________ _________________

POWER CABLE(150A)

TORCHES

35. MILLER WP-17FV-25-R PER EA ________________ _______________

A-150 150 AMP AIR COOLED TIG TORCH PACKAGE

WITH FLEXIBLE HEAD AND 25’ CABLE AND CUTOFF

VALVE

36. SHURLITE 3001B PER EA _______________ _______________

UNIVERSAL ROUND FILE LIGHTER/TORCH STRIKER

37. PROFAX 105Z57 POWER CABLE ADAPTER PER EA _________________ ________________

FOR 9,9F,9FV, 9P, AND 9V TIG TORCHES

38. PROFAX 26FV-HD TORCH BODY PFXPX26FV-HD PER EA __________________ ________________

39. VICTOR MT210A MACHINE CUTTING TORCH VIC0380-0217 PER EA __________________ ________________

40. VICTOR CA2460+ 90 DEGREE HEAVY DUTY CUTTING PER EA __________________ ________________

ATTACHMENT, 10-1/2” (BOX) VIC0381-1928

CUTTING TIPS

41. HARRIS 6290-2 PER EA _______________ _______________

SIZE 2 ONE-PIECE GENERAL-PURPOSE HAND CUTTING TIP

42. FLAME TECH FLA 1GPP

SIZE 1 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

43. FLAME TECH FLA 2GPP

SIZE 2 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

44. FLAME TECH FLA 3GPP

SIZE 3 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

ELECRODES

45. CKW - T187GT2 PER PAK _______________ _______________

1/8 X 7 - 2% THORIATED TUNGSTEN ELECTRODE

10/BOX

46. CKW - T187G PER PAK _______________ _______________

1/8 X 7 PURE TUNGSTEN ELECTRODE

10/BOX

47. CKW - T3327G PER PAK _______________ _______________

3/32 X 7 – PURE TUNGSTEN ELECTRODE

10/BOX

48. CKW – T187GC2 PER PAK _______________ _______________

1/8 x 7 - 2% CERIATED TUNGSTEN

GREY (EW-CE2) 10/BOX

49. LINCOLN SUPER GLAZE 4043 3/32X36 TIG ROD PER LB ________________ ________________

LINED031112

50. LINCOLN SUPER GLAZE 5356 035X16 MIG WIRE PER LB _________________ ________________

LINED028385

51. VICTORY 4043 .030X1 MIG WIRE VWA40430301 PER LB _________________ ________________

52. CKW – T187GL PER PAK ________________ _______________

1/8 x 7 - 2% LATHANATED

TUNGSTEN (EWLA-2) BLUE

53. TWECO 91101109 PER EA ________________ _______________

A-532-MC 200 AMP BALL POINT COPPER ALLOY

ELECTRODE HOLDER FOR 2/0 CABLE (8-1/2” LENGTH)

COLLETS

54. CKW 45V27 PER EA _______________ _______________

1/8 MEDIUM #10 TIG GAS LENS COLLET BODY

55. CKW 45V26 PER EA _______________ _______________

3/32 MEDIUM TIG GAS LENS COLLET BODY

56. CKW 10N24 PER EA _______________ _______________

3/32” STANDARD COLLET

57. CKW 10N25 PER EA ______________ _______________

1/8” 10N SERIES TIG COLLET

58. CKW 10N28 PER EA _______________ _______________

CK COLLET BODY FOR 18” (3CB418)

59. CKW 45V64 PER EA _______________ _______________

3 SERIES LARGE DIAMETER GAS LENS

FOR 3/32” (2.4MM)

60. CKW 995795 PER EA ________________ _______________

3 SERIES 1/8” GAS LENS COLLET BODY

61. CK 53N88 #10 5/8”X1-7/8”LARGE DIAMETER ALUMINA PER EA ________________ ________________

GAS LENS NOZZLE (3AG10LD) CKW53N88

62. CK 995795 1/8” GAS LENS, LARGE DIAMETER (3GL418LD) PER EA ________________ _______________

CKW995795

63. CK 54N14 #8 ALUMINA GAS LENS NOZZLE (3AG8) (1/2”X1-5/8”) PER EA ________________ ________________

CKW54N14

BACK CAP

64. WELDCRAFT 57Y02 PER EA _______________ _______________

LONG BACK CAP – 300L

65. CKW 57Y04 PER EA _______________ _______________

BACK CAP WITH O-RING

REGULATORS

66. HARRIS 4408578 PER PACK _______________ _______________

MEDIUM DUTY SR 350/360 DUAL PACK

SINGLE STAGE REGULATOR

67. FLAME TECH VMOR-22 PER EA _______________ ________________

OXYGEN REGULATOR

68. FLAME TECH VMAR-22 PER EA _______________ _______________

ACETELYNE REGULATOR

69. FLAME TECH 100-FL-AR580 PER EA _______________ _______________

ARGON FLOW METER & REGULATOR

70. FLAME TECH FLOWMETER 100-FL-CD320 PER EA _______________ _______________

CARBON DIOXIDE SINGLE STAGE FLOW GAUGE

REGULATOR

71. VICTOR VIC 0781-0589 VICTOR HEAVY DUTY PER EA _______________ _______________

SINGLE STAGE SR 450 REGULATOR

72. FLAME TECH MED (OXYGEN) REGULATOR FLAVMOR-22 PER EA ________________ ________________

73. VICTOR WH 315FC + 9” HD HANDLE WITH FLASH ARRESTORS PER EA __________________ _______________

0382-0034 (BOX) VIC0382-0093

HELMETS/REPLACEMENT PARTS

74. PYRAMEX S1010 PER EA _______________ _______________

FACESHIELD WINDOW CLEAR

BRAND______________________________

MODEL______________________________

75. WELDCOTE – KLEARVIEWLI PER EA _______________ _______________

WELDCOTE INSIDE CLEAR LENSE FOR WELDING

HELMET

BRAND______________________________

MODEL______________________________

76. WELDCOTE – KLEARVIEWLO PER EA _______________ _______________

WELDCOTE OUTSIDE CLEAR LENSE FOR WELDING

HELMET

BRAND______________________________

MODEL______________________________

77. 1CR PIPELINER RATCHET HEADBAND F3000 SERIES 6 PER BOX PER EA ________________ _______________

FIB1CR

BRAND _____________________________

MODEL _____________________________

WHEELS/BLADES

78. DW8435 PER EA _______________ ________________

4-1/2” x 1/8” x 5/8” – 11 THREAD

DEPRESSED CENTER CUT OFF WHEEL THREADED W/HUB

79. DW 8751 PER EA _______________ _______________

GRINDING DISC/ROCKS 4-1/2” x 3/32” x 5/8” –

11 THREAD

80. DW 8310 PER EA _______________ _______________

4-1/2” x 7/8” FLAP DISC - 120 GRIT

81. PFERD 61114 PER EA _______________ ________________

4-1/2” x ¼” x 5/8” – 11 THREAD W/ HUB

DEPRESSED CENTER GRINDING WHEEL - 30 GRIT

82. PFERD 82900 PER EA _______________ _______________

PFERD ADVANCE 82900 CRIMPED WIRE WHEEL

BRUSH – 3 IN DIAMETER – 0.014 INCH CARBON

STEEL WIRE

83. CAMEL 41734 PER EA _______________ ________________

4-1/2” x 5/8” – 11 60 GRIT - TYPE 29 FLAP WHEEL

84. NOR 66253370022 PER EA _______________ ___________________

KNOT WHEELS - 4-1/2” x 5/8” – 11 THREAD

WIRE WHEELS

85. DW 8725 PER EA _______________ _______________

6” x .045” x 7/8” CUTOFF WHEEL

86. PFERD 61006 PER EA _______________ ________________

7” x 1/4” x 5/8’ – 11 TYPE 27 DEPRESSED-CENTER

REINFORCED GRINDING WHEEL – 24 GRIT

87. PFERD 64502 PER EA _______________ _______________

14” X 3/32” X 1” LARGE DIAMETER CUT-OFF WHEEL

36 GRIT

88. D1472CF DIABLO 14 INCH STEEL DEMON 72T PER EA __________________ ______________

CERMET ll CARBIDE FERROUS METAL SAW BLADE

89. DEWALT 4-1/2X1/4X5/8-11 A24R GRINDING DISC T27 PER EA ________________ ________________

(960/PLT) DEWDW4523

90. DEWALT 4-1/2X.045X7/8 A60T METAL/SS CUT-OFF WHEEL PER EA _________________ __________________

T1 DEWDW8062

91. PFERD 82186 4X.020X5/8-11 STRINGER BEAD KNOT WIRE PER EA ___________________ __________________

WHEEL (OLD #87053) PFE82186

92. DIABLO 14”X1” 72T CT CERMET CHOP SAW BLADE FERROUS PER EA __________________ ____________________

METALS AND SS FRED1472CF

HAND TOOLS

93. PFERD 11155 PER EA ___________________ ___________________

AMERICAN PATTERN HALF ROUND BASTARD

PIPELINER HAND FILE 14” L x 1-3/8” W x 11/32” D

BRAND______________________________

MODEL______________________________

94. PFERD 85051 PER EA ________________ ________________

SHOE HANDLE WIRE BRUSH CARBON STEEL

BRAND______________________________

MODEL______________________________

95. KLEIN D213-9NE PER EA _______________ _______________

9” HIGH LEVERAGE NE-TYPE SIDE CUTTER PLIERS (70040)

BRAND______________________________

MODEL______________________________

96. CHANNEL LOCK 430 PER EA _______________ _______________

10” CHANNEL LOCK PLIERS

BRAND______________________________

MODEL______________________________

97. ANCH10-206 PER EA _______________ _______________

CHANNEL LOCK NEEDLE NOSE PLIERS

BRAND______________________________

MODEL______________________________

98. IRWIN 2078610 PER EA _______________ _______________

10” ADJUSTABLE WRENCH

BRAND______________________________

MODEL______________________________

99. CRESCENT AC210VS PER EA _______________ _______________

10” CHROME FINISH ADJUSTABLE WRENCH

BRAND______________________________

MODEL______________________________

100. CRESCENT C11CCSV PER EA ________________ ________________

11” LOCKING C-CLAMP WITH SWIVEL PADS

BRAND______________________________

MODEL______________________________

101. CRESCENT C10CV PER EA _______________ _______________

10” CURVED JAW LOCKING PLIERS WITH WIRE CUTTER

BRAND______________________________

MODEL______________________________

102. MAYHEW TOOLS 24004 PER EA _______________ ________________

5/8” DIAMETER CENTER PUNCH

BRAND______________________________

MODEL______________________________

103. IRWIN 1794469 PER EA _______________ ________________

METAL COMBINATION SQUARE, STAINLESS STEEL

BLADE, 12 INCH BODY

BRAND______________________________

MODEL______________________________

104. HEAVY DUTY COMMERCIAL CORN/STRAW BROOM PER EA _______________ _______________

15” SWEEPING WIDTH

BRAND_____________________________

MODEL____________________________

105. SHOP PUSH BROOM AND HANDLE PER EA _______________ _______________

BRAND______________________________

MODEL______________________________

106. ROYAL RBMMBEC1S PER EA ________________ _______________

B&M EC1S HANDHELD BRUSH LONG HANDLE

BRAND______________________________

MODEL______________________________

107. 900-FL5 PER EA _______________ _______________

SOAPSTONE FLAT

BRAND______________________________

MODEL______________________________

108. KOMELON 25 FT TAPE MEASURE SM5425 PER EA _______________ ________________

BRAND_____________________________

MODEL_____________________________

109. DEWALT 11 AMP 4.5” SMALL ANGLE GRINDER PER EA ________________ ________________

DWE4222N

BRAND_____________________________

MODEL_____________________________

SAFETY

110. HOWARD LEIGHT LL-1S PER EA _______________ ________________

HOWARD LEIGHT LASER LITE EARPLUGS

UNCORDED - 200/BOX

BRAND______________________________

MODEL______________________________

111. MOLDEX 6900 PER EA ________________ _______________

EARPLUGS W/CORDS 100/BOX

112. PYRAMEX S4110S PER EA _______________ _______________

SAFETY GLASSES – CLEAR

BRAND______________________________

MODEL______________________________

113. PYRAMEX S4120S PER EA _______________ _______________

SAFETY GLASSES – TINTED

BRAND______________________________

MODEL______________________________

114. TIL30S PER EA _______________ _______________

TILLMAN TIG GLOVES – S

115. TIL1338S PER EA _______________ _______________

TILLMAN GOATSKIN UNLINED TIG GLOVES – S

116. TIL24CL PER EA _______________ _______________

TILLMAN TIG GLOVES – L

117. TIL30XL PER EA _______________ _______________

TILLMAN TIG GLOVES – XL

118. PYRAMEX S4180S PER EA ________________ ________________

INDOOR/OUTDOOR MIRROR POLYCARBONATE

4100 SERIES SAFETY GLASSES

BRAND_______________________________

MODEL_______________________________

119. REV25GS BLACK STALLION TIG GLOVES PER EA _______________ ________________

120. REV25GM BLACK STALLION TIG GLOVES PER EA _______________ _________________

121. REV25GL BLACK STALLION TIG GLOVES PER EA _______________ _________________

122. BM88 LARGE BLACK STALLION MIG GLOVES PER EA _________________ ________________

123. LS50 SMALL BLACK STALLION WOMENS STICK GLOVE PER EA ________________ ________________

124. LS50 MEDIUM BLACK STALLION WOMENS STICK GLOVE PER EA _________________ ________________

125. DYNUVT01 2X4 ¼ SAFETY/COVER LENS TUFCOTE W/CR39 PER EA _________________ _________________

AND Z87 + SCRATCH RESISTANCE.

126. TILLMAN PREMIUM SPLIT COWHIDE 14” BLUE/RED PER EA _________________ _________________

STICK WELDING GLOVE TIL1075.

127. TILLMAN TOP GRAIN PEARL GOATSKIN TIG WELDING PER EA _________________ __________________

GLOVE W/4” CUFF TIL1338M.

128. TILLMAN 30” FR GREEN JACKET LRG 9OZ (TPC5500) PER EA __________________ _________________

TIL6230L.

129. COMEAUX 7-1/2 REVERSIBLE WELDING CAP STYLE PER EA __________________ __________________

2000 ASSTD COM20712.

130. TILLMAN 3221-20 LARGE CAPE SLEEVE W/20” BIB PER EA __________________ _________________

000051081 TIL322120L.

131. COMEAUX 7-1/8 REVERSIBLE WELDING CAP STYLE PER EA ________________ _________________

2000 ASSTD C COM20718

132. COMEAUX 7-7/8 REVERSIBLE WELDING CAP STYLE PER EA ________________ ________________

2000 ASSTD C COM20778

133. TILLMAN 3221-20 X-LARGE CAPE SLEEVES W/20” PER EA _________________ _________________

BIB TIL322120XL

134. TILLMAN 30” FR GREEN JACKET 9OZ TIL6230XL PER EA _________________ _________________

135. ARCONE SINGLES S240 HORIZONTAL SINGLE FILTER PER EA _________________ __________________

SH-10 2”X4-1/4” HD ARRS240-10

136. TILLMAN 30” FR GREEN JACKET 9OZ (TPC5500) PER EA _________________ __________________

TIL62302X

137. TILLMAN 3221-20 2X-LARGE CAP SLEEVE BIB TIL3221202X PER EA __________________ _____________

CABLE/HOSE

138. GNSWELD-1 PER EA ________________ _______________

KALAS DIRECT WELDING CABLE #1 – PER FT

BRAND______________________________

MODEL______________________________

139. GNS RH 3127-25 PER EA _______________ _______________

ARGON HOSE 1/4” x 25’ INERT GAS HOSE

BRAND______________________________

MODEL______________________________

140. GNS RH2103-50 PER EA _______________ ______________

BESTWELDS – TWIN TORCH HOSE ¼” x 50’

BRAND______________________________

MODEL______________________________

141. WES CK-26 WESTERN HOSE REPAIR KIT (RK-26) ¼ HOSE PER EA ______________ ______________

142. HHT HHRH-10 HEAVY HITTER 1O FT HOSE REPAIR KIT PER EA ______________ ______________

143. MILLER XMT 400 ARCREACH, TWECO AUTO-LINE PER EA _______________ ________________

208-575V 50/60HZ 1/3PH MIL907865

144. WESTERN CK-26 HOSE REPAIR KIT (RK-26) 1/4” PER EA ________________ _________________

HOSE ONLY PK/1 WESCK-26

145. GNS T2102D 1/4”X25FT TWIN HOSE FITTED PER EA _________________ ________________

(GRADE “T”) (T254) GNSTH1731

BRAND ____________________________

MODEL ____________________________

SUPPLIES

146. MATHEY D160 PER EA _______________ _______________

4” x 4’ BLACK MEDIUM WRAP AROUND

PIPE TAPE

BRAND______________________________

MODEL______________________________

HYPOTHERM POWERMAX 65 PLASMA CUTTER

147. 220818 PER EA _______________ _______________

SHIELD TIP

148. 220854 RETAINING CUP PER EA _______________ _______________

149. 220819 PER EA _ ______________ _______________

NOZZLE

150. 220842 PER EA _______________ _______________

ELECTRODE

151. 220857 PER EA _______________ _______________

SWIRL RING

RAZERWELD PLASMA CUTTER

152. RAZ RW1048-03 ELECTRODE PER EA ________________ _______________

153. RAZ RW1601 SWIRL RING PER EA ________________ _______________

154. RAZ RW792-08 CUTTING TIP PER EA _________________ _______________

155. RAZ RW0658 SHIELD CAP PER EA _________________ _______________

156. RAZ RW0678 DOUBLE POINTED SPACER PER EA _________________ _______________

HYPERTHERM POWERMAX 600 PLASMA CUTTER (DURAMAX TORCH)

157. HYPERTHERM 220857 PER EA _______________ _______________

COPPER SWIRL RING, 45/65 AMP

158. HYPERTHERM 220842 PER EA ________________ _______________

COPPER ELECTRODE, 45/105 AMP

159. HYPERTHERM 220819 PER EA _______________ _______________

DRAG CUTTING NOZZLE, 65 AMP

160. HYPERTHERM 220854 PER EA _______________ ________________

RETAINING CAP, 45/105 AMP

161. HYPERTHERM 220818 PER EA ________________ ________________

COPPER DRAG CUTTING SHIELD, 45/65 AMP

162. HYPERTHERM 220941 PER EA ________________ ________________

COPPER NOZZLE 45 AMP

MILLER SPECTRUM 875 PLASMA CUTTER

163. MILLER 256027 PER EA ________________ _________________

DRAG SHIELD XT, 60 AMP

164. MILLER 249929 PER EA ________________ _________________

CONTACT TIP XT, 60 AMP

165. MILLER 256026 PER EA ________________ _________________

ELECTRODE XT, 60 AMP

166. MILLER 256028 PER EA ________________ _________________

SWIRL RING XT, 60 AMP

167. MILLER 256029 PER EA ________________ _________________

RETAINING CUP XT, 60 AMP

MILLER MIG WHIP & PARTS

168. BERNARD Q3015AE8HMC PER EA ________________ _________________

15 FT, 300 AMP, 052 MIG GUN WITH MILLER PLUG

169. TREGASKISS 401-6-62 PER EA ________________ ________________

5/8 INCH COPPER NOZZLE

170. TREGASKISS 403-20-35 PER EA ________________ ________________

TOUGH LOCK HEAVY DUTY .035 CONTACT TIP

171. TREGASKISS 403-20-45 PER EA ________________ _________________

TOUGH GUN HEAVY DUTY TOUGH LOCK

.045 CONTACT TIP

172. DELIVERY PER ORDER TO SPECIFIED LOCATIONS: PER ORDER ________________ _________________

• 1710 SULLIVAN DR., BOGALUSA, LA 70424

• 7067 HWY 10, GREENSBURG, LA 70441

• 111 PRIDE DR., HAMMOND, LA 70401

• 27268 HWY 21N., ANGIE, LA 70426

• 11640 BURGESS AVE., WALKER, LA 70785

• 65556 CENTERPOINT BLVD., LACOMBE, LA 70445

NOTES:

• THIS IS AN ALL OR NONE BID. ONLY 1 VENDOR WILL BE AWARDED.

• THIS BID IS FOR THE SUPPLY OF THE ABOVE WELDING CONSUMABLES ON AN AS NEEDED BASIS – NOT A SINGLE PURCHASE. PRICES MUST BE FIRM AND GUARANTEED OVER THE ENTIRE SPAN OF THE AGREEMENT, WHICH IS, JULY 1, 2026 – JUNE 30, 2027.

• IF PRICING CANNOT BE HONORED THROUGH THE ENTIRE SPAN OF THE AGREEMENT, THE AGREEMENT WILL BE CANCELLED AND REBID.

• PLEASE PUT BID NUMBER IN THE SUBJECT LINE OF THE EMAIL