Waste Water Aerator Assembly

Agency: DEPT OF DEFENSE
State: California
Type of Government: Federal
FSC Category:
  • 46 - Water Purification and Sewage Treatment Equipment
Set Aside: Total Small Business Set-Aside (FAR 19.5)
Posted Date: Aug 28, 2025
Due Date: Sep 3, 2025
Solicitation No: W911S225U1811
Original Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page

Description

Follow
Waste Water Aerator Assembly
Active
Contract Opportunity
Notice ID
W911S225U1811
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE ARMY
Major Command
AMC
Sub Command
ACC
Sub Command 2
MISSION INSTALLATION CONTRACTING COMMAND
Sub Command 3
419TH CSB
Office
W6QM MICC-FT DRUM
Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information View Changes
  • Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
  • Updated Published Date: Aug 28, 2025 01:46 pm PDT
  • Original Published Date: Aug 27, 2025 09:44 am PDT
  • Updated Date Offers Due: Sep 03, 2025 10:20 am PDT
  • Original Date Offers Due: Sep 03, 2025 10:20 am PDT
  • Inactive Policy: Manual
  • Updated Inactive Date: Sep 03, 2025
  • Original Inactive Date: Sep 03, 2025
  • Initiative:
    • None
Classification
  • Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
  • Product Service Code: 4630 - SEWAGE TREATMENT EQUIPMENT
  • NAICS Code:
    • 333998 - All Other Miscellaneous General Purpose Machinery Manufacturing
  • Place of Performance:
    USAG Ft Hunter Liggett B319 Lagoon Dr Jolon, CA 93928 93928
Description
Waste Water Aerator SystemMOTOR:HORSEPWER: 14.5-15.5RPM: 1150-1250Full Load AMPS: 42/21Voltage 230/460Voltage Phase: 3Cycle: 60Service Factor: 1.15-1.20Insulation Class: ?F? NON-HygroscopicBearings: Double Row Angular ContactBearing Life: 950K-1200K hoursEnclosure: Totally Enclose Fan-Cooled Motor (TEFC)MOTOR SHAFT:Shaft Material: 17-4 Precipitation-Harding (PH), Stainless steel ( S.S), 1150 ConditionShaft Length: 28inches from end shield face of motorShaft Diameter: 1.625 inch O.DMinimum Yield Strength: 135K PSIMaximum Yield Strength: 250K PSIPROPELLER:Material: 316 Stainless SteelBalancing: Dynamically to Less than � MIL MaximumDEFLECTOR:Material: 304 Stainless Steel, HDG Steel and FRPExterior Finish: CHEM. Resistant GEL-Coat UV PlateInternal Fill: #3 Quartzite and Resin MixtureMinimum FRP Thickness: .375 inchExterior Color: WhiteWeight: 485-490 LBsPOWER MODULE SUPPORT RING:Material: 304 Stainless SteelDimensions of Flat Rings: .5inch by 3inch by 42 inches O.D.Dimensions of support Rod: 1.5 inch by 6 inchesMethod of construction: WeldedAERATOR FLOAT:Method of Construction: Hand Lay UpMaterial: CDM 2415 PROMAT and Chemical Resistant ResinExternal Finish: Chemical Resistant Gel-Coat UV StabilizedExternal Color: WhiteInternal Reinforcing (Power Module Support) 3/8 in by 3 inch by 42 inches O.D. Steel RingInternal Reinforcing (Mooring Eyes): 3/8inch by 3inches by 9 inches Flat BarThroat Section Reinforcing: 2inch by 2 inch Encapsulated RibsInternal Fill: 2#DEN. Polyurethane Closed Cell FoamMinimum Thickness: .25inch NON-Stress AreasMooring Eye Dimension 5/8 inch by 3 inch longFloat Diameter: 88 inchesFloat Thickness: 14 inchesSink Safety Factor: 2.5Volute Thickness: FRP .75 inch ThickPERFORMANCE: Pumping Rate: 12,172 GPM02 Transfer Rate: 3.0 LBS/HP/HR/MinMinimum DIA. Of Complete Mix at 6 feet Depth: 80 FeetMinimum DIA. Of O2 Dispersion at 6feet Depth: 210 FeetWT. Of Completed Unit: estimated 1700 LBS Shipping WTHeight of Complete Unit: minimum 54 inches/ max 60 inches. Vendor Provide Aerator Dimensions Chart and manualVendor must be able to accept qty change from 10ea to 5ea due to funding availability at the time of acceptingMust be able to deliver on Weekdays 7am to 3 pm
Attachments/Links
Contact Information View Changes
Contracting Office Address
  • MICC FORT DRUM 4205 PO VALLEY RD
  • FORT DRUM , NY 13602-5220
  • USA
Primary Point of Contact
Secondary Point of Contact


History

Related Document

Aug 27, 2025[Combined Synopsis/Solicitation (Updated)] Waste Water Aerator Assembly
Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.
View Sample Report Start Free Trial

See Also

Media Filter Rehabilitation f...

Project ID: RFP# 27-018 Title: Media Filter Rehabilitation for WTP Filters #1 &

City of Benicia

Due by 9/29/2026

* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.