Vertical Tilt-Frame Band Saw

Active

Contract Opportunity

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

General Information

Document Type: Combined Synopsis/Solicitation

Solicitation Number: 9531BM26Q0031

Product or Service Code: 6640 – Laboratory Equipment and Supplies

Set Aside: 100% Small Business Set-Aside

NAICS Code: 333517 – Machine Tool Manufacturing

Small Business Size Standard: 500 employees

Contract Type: Firm-Fixed-Price (FPP) Purchase Order

FOB Point: Destination

Quotation Due Date: September 25, 2026, 4:00 p.m., Eastern Daylight Time (EDT)

Contracting Office Address

National Transportation Safety Board

Acquisition Division (CFO-30)

490 L’Enfant Plaza, SW

Washington, DC 20594

Combined Synopsis/Solicitation

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotations are being requested and a written solicitation will not be issued.

The solicitation number for this requirement is 9531BM26Q0031. This solicitation is issued as a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01.

The requirement is issued as a 100% total small business set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is NAICS code is 333517, “Machine Tool Manufacturing”.

The National Transportation Safety Board (NTSB) requires the purchase and delivery of one (1) vertical tilt-frame band saw, AMADA VT4555M (8-Mark-III) with M6 High Column option, or equal. The named product establishes the characteristics and level of quality that will satisfy the Government’s requirement. Equal products will be considered in accordance with FAR 52.211-6, Brand Name or Equal.

The equipment shall be new and current production. Used, refurbished, remanufactured, demonstration, or protype equipment will not be accepted.

Background

The National Transportation Safety Board (NTSB) is an independent Federal agency charged by Congress with investigating every civil aviation accident in the United States and significant accidents in the other modes of transportation -- railroad, transit, highway, marine, pipeline, and commercial space-- and issuing safety recommendations aimed at preventing future accidents.

The NTSB has a requirement to purchase one (1) Vertical Tilt-Frame Band Saw, AMADA VT4555M (8-Mark-III) with M6 High Column option, or equal. This equipment will aid in the cutting of large pieces of accident wreckage (portions of pipeline, railroad track, engines, etc.) such that they can subsequently be handled in the laboratory for examination and metallurgical failure analysis. Due to the size and irregular shape of accident wreckage sometimes unusual fixturing methods need to be employed. To allow for these unusual fixturing methods the band saw must meet very specific requirements.

Products

The contractor shall provide firm-fixed pricing for CLIN 0001. The quotation shall include all costs necessary to provide the required equipment, components and accessories necessary for operation and compliance with the minimum salient characteristics, operation manual, one-year warranty, packaging, shipping, and FOB Destination delivery.

CLIN: 001

Description: Vertical Tilt-Frame Band Saw

Qty: 1

Unit: EA

Unit Price: $_____________

Extended Price: $___________

TOTAL QUOTED PRICE: $________________

Minimum Salient Characteristics

The Vertical Tilt-Frame Band Saw, shall meet the following minimum specifications:

1. The band saw shall be of the vertical tilt frame type where the workpiece stays fixed in place and the saw blade moves into the work.


2. The band saw worktable shall have minimum dimensions of 24 inches long by 32 inches wide.


3. The band saw worktable shall have a minimum of 4 T-slot tracks evenly distributed along the length of the worktable.


4. The T-slots shall be suitable for use with conventional strap clamps and riser blocks such as those used on milling machines.


5. The band saw shall not have any protrusions or structural elements extending above the surface of the worktable which would interfere with a workpiece hanging off either side or the front of the worktable.


6. The bandsaw shall have a minimum cutting capacity in the vertical position of 18 inches x 28 inches.


7. The band saw shall have a minimum of 5HP motor for the blade.


8. The bandsaw shall be able to be connected to a 208V 3ph electrical supply.


9. The band saw shall have an integral coolant system to provide cutting/cooling fluid to the blade at the point of the cut.


10. The band saw must come with an Operation Manual.


11. Warranty against defects in materials and workmanship for a period of one (1) year from delivery date.

The quotation shall clearly identify the manufacturer and exact model offered and shall include manufacturer technical literature sufficient to verify compliance with each minimum salient characteristic.

Review the attached RFQ document and attachments which are attached hereto and incorporated herein for a detailed description of the requirement.

Brand Name or Equal

FAR 52.211-6, Brand Name or Equal, applies to this acquisition.

A quoter offering the referenced Amada, Model VT4555M with M6 High Column Option (8-Mark-III) shall identify the manufacturer and exact model offered. A quoter offering an equal product shall clearly identify the manufacturer and model number and furnish descriptive literature sufficient to establish that the proposed product meets or exceeds each minimum salient characteristic.

For an equal product, the quotation shall include a concise compliance cross-reference identifying each salient characteristic, the offered specification, and the technical-literature page or section supporting compliance. Any modification required to make the offered product conform to the requirements shall be clearly identified.

The Government will evaluate an equal product based on information furnished with the quotation or specifically identified in the quotation and reasonably available to the Contracting Officer. The Government is not responsible for locating technical information that the quoter has not identified.

Buy American Information

Quoters shall provide the following information for the product offered:

Manufacturer: ______________________________

Make/Model: _______________________________

Country of Manufacture: ____________________

Does the offered product qualify as a “domestic end product” as defined in FAR 52.225-1, Buy American—Supplies? ☐ Yes ☐ No

If the offered product does not qualify as a domestic end product, the quoter shall identify the product as a foreign end product and provide the country of origin in accordance with the applicable Buy American certification requirements of the solicitation.

Delivery

The offeror shall deliver the band saw and all necessary operational manuals within 90 calendar days of the date of award.

The equipment is to be delivered FOB Destination to:

National Transportation Safety Board

Office of Research and Engineering

401 Prince Georges Blvd, Suite F

Upper Marlboro, MD 20774

Basis for Award

The Government intends to award one (1) firm-fixed-price contract to the responsible Contractor whose quotation conforms to the requirements of this RFQ and represents the lowest-priced technically acceptable quotation.

The Government will evaluate quotations using the following factors:

1. Technical Acceptability


2. Price

Factor 1: Technical Acceptability

Technical Acceptability will be evaluated on an Acceptable/Unacceptable basis. To be determined technically acceptable, the quotation must offer a new band saw that meets each minimum salient characteristic and other material requirement of this RFQ; provide sufficient technical information to verify compliance; meet the required delivery schedule; and take no exception to a material requirement.

A quotation that does not demonstrate compliance with each minimum salient characteristic and other material requirement will be determined technically unacceptable and will not be considered for award. Features or capabilities exceeding the stated minimum requirements will not receive additional evaluation credit.

Factor 2: Price

The Government will evaluate the total firm-fixed price for the requirement and will evaluate price for reasonableness using appropriate price analysis techniques.

Evaluation Factor Order of Importance

Technical Acceptability is a threshold requirement. Among quotations determined technically acceptable, award will be made to the responsible quoter submitting the lowest total evaluated price. No tradeoffs will be made between price and non-price factors.

Clauses and Provisions

Please review and complete Attachment 1 and Clauses and Provisions, where applicable. The attachment is included hereto and incorporated herein for additional information.

Electronic Dissemination of Combined Synopsis/Solicitation

Access to this RFQ and amendments will be posted on the Contracting Opportunities website https://sam.gov/content/opportunities. Amendments to the combined synopsis/solicitation shall be publicized in the same manner as the initial synopsis/solicitation. All Contractors are cautioned that it is your responsibility to frequently check back to the website to ensure that you have received all issued amendments.

System for Award Management

Contractors must have an active SAM registration by the quotation due date. A Contractor without an active SAM registration by the quotation due date will not be considered for award.

Questions Regarding the Combined Synopsis/Solicitation

All questions regarding this combined synopsis/solicitation shall be directed to Nicole Evanitsky via email at nicole.evanitsky@ntsb.gov. ALL QUESTIONS MUST BE RECEIVED BY 4:00 p.m. EST on September 23, 2026.

Submission of Quotations

Your quotation must be received no later than 4:00 p.m., Eastern Daylight Time (EDT), on September 25, 2026. LATE QUOTATIONS MAY NOT BE CONSIDERED in accordance with Federal Acquisition Regulation (FAR) provision 52.212-1 – Instructions to Offerors – Commercial Products and Commercial Services.

Quotes may be transmitted via email to:

Nicole Evanitsky

Email: nicole.evanitsky@ntsb.gov

The maximum size of an email, including attachments, which the NTSB email server can accept is 35 megabytes (MB). Therefore, the Contractor may choose to send their quotation in separate emails, if the combined file size of any email received by the NTSB email server will exceed 35MB. Contractors are encouraged to remove excess graphics from their quotations to ensure quotations remain under the file size limit. It is the Contractor's responsibility to ensure that the designated point of contact has received your quotation at the email address of the contact specified above by the quotation due date.

Attachments/Links