USCGC Maria Bray DPS Service Tech

This is for informational purposes only. This has been awarded VIA JOTFOC.

1.0 PR #: 52000PR260002240

STATEMENT OF WORK

LAST UPDATED: 12/29/2025 PAGE 1/1

STATEMENT OF WORK (SOW)

FOR

CGC MARIA BRAY DPS Technical Support from Nacos Marine

CGC MARIA BRAY DPS (Dynamic Positioning System) is not working as

intended and cutter technicians have exhausted efforts with support over the

phone with Nacos Marine tech. Cutter CO and technicians have requested on-site

technical support. The DPS is relied upon for WLB-225 and WLM-175 assets for

holding station while working on navigation aids. Without a properly functioning

DPS system the cutter is unable to safely perform required operational missions.

The Nacos Marine technician will be on-site to observe current DPS operation

and make any software or physical hardware changes/updates required to bring

the system back to SAT operation.

1.1 OBJECTIVE

The goal is to supply CGC MARIA BRAY with OEM technical support from Nacos

Marine in order to regain full DPS system functionalility to allow unit to perform

operational requirements for aids to navigation and various other Southeast District

operatoins.

Item Description

Part / Item Number

DPS (Dynamic Positioning System)

DPS system holds cutter on station while working on aids to

navigation and performs autopilot function while transiting.

The DPS receives multiple navigation sensor inputs to

quickly make functional adjustments to the operation of

shaft speed and bow/stern thrusters to keep the cutter

safely on station during dangerous buoy deck evolutions.

• One Nacos Marine technician will travel to CGC MARIA BRAY homeport at:

4200 Ocean St, Atlantic Beach, FL 32233.

Please contact CWO Trevor Bannerman, 781-443-4695 with questions regarding this