SXHT 21-1005 Replace Chiller AHU and Fan Coil Unit

Work to be performed under this project consists of providing all labor, equipment and materials to replace the 60-ton TRANE R-22 Chiller with a TRANE R-410A Chiller. The condenser and evaporator of the new chiller shall be of shell and tube design. The cooling tower shall be replaced with a Tower Tech cooling tower. Both hot and chilled water pumps need to be replaced, along with all new electrical panels. Controls are to be upgraded to PSFB EMCS standards. All piping in the Mechanical Rooms, with the exception of the piping to the boiler, is to be replaced. All the AHUs in the facility needs to be replaced as well. Also, there are 12 fan coil units throughout the facility that are deteriorated and need to be replaced. Each of the fan coil units should be individually controlled with the own wall stat. Touch-up paint walls, replace any damaged gypsum board, replace any damaged wainscot and replace any damaged carpeting, as conditions require during equipment replacement. Design shall include a provision for the Contractor to provide a portable chiller during construction. All work shall comply with State of Florida Building Codes and Wing Facility Excellence guidelines.