Study to assess the feasibility of using a point-of- care, portable D-…

The Canadian Space Agency (CSA) seeks to conduct a study to assess the feasibility of using a point-of-

care, portable D-dimer testing device on the International Space Station (ISS). This contract could lead to

further deployment activity support, should the feasibility study be conclusive.

The Work will involve the following:

1) To confirm, preliminarily, the technical feasibility of integrating a point-of-care D-dimer testing

device into the ISS environment and to determine whether a Commercial Off the Shelf (COTS)

device can be used without major redesign to operate safely and reliably in space, with attention

to sample handling in microgravity.

2) To assess the feasibility for integration with existing spacecraft safety and system requirements,

such as but not limited to, power, electromagnetic compatibility, thermal control, environmental,

materials and processes and human factors, as well as launch, stowage and handling, crew

installation and operations.

3) Developing a preliminary space concept for the use of the D-dimer testing device on ISS.

Following the feasibility assessment (tasks 1 to 3), additional work (optional tasks) could include:

4) To provide expert support to the CSA throughout the definition and implementation phases of the

D-dimer payload.

5) To supply D-dimer testing hardware and associated consumables.

6) To support specific tests, as required by CSA and NASA.

Context:

The ISS program recently identified the pressing need to monitor D-dimer levels in astronauts following the

discovery of a thrombus in a crew member’s jugular vein during a vascular ultrasound study, suggesting a

potential risk for spaceflight. D-dimer is a key biomarker for detecting excessive clot formation and

breakdown in conditions such as deep vein thrombosis (DVT) and pulmonary embolism (PE). A high D-

dimer level indicates increased clot activity, making it a valuable tool for assessing thrombotic conditions in

the crew throughout the missions.

The CSA is evaluating the feasibility of providing a Canadian D-dimer testing device for operational use on

the ISS, to answer this need. To further the development of a concept for D-dimer testing capability onboard

the ISS, the CSA requires technical support.

The contractor identified to perform this study owns a proprietary D-dimer testing device showing early

indications that it could perform reliably in the ISS environment, which involves important technical and

programmatic constraints such as microgravity and limited sample processing time and capability.

A contracting officer can use limited tendering for specific reasons outlined in the applicable trade agreements. The reason for this contract is described below:

• Exclusive Rights