25--Steel Utility Truck Bed and Installation Elmendorf
| Agency: | INTERIOR, DEPARTMENT OF THE |
|---|---|
| State: | Alaska |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Set Aside: | Total Small Business Set-Aside (FAR 19.5) |
| Posted Date: | Aug 21, 2025 |
| Due Date: | Aug 25, 2025 |
| Solicitation No: | 140D0425Q0670 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
Follow
Active
Contract Opportunity
Notice ID
140D0425Q0670
Related Notice
Department/Ind. Agency
INTERIOR, DEPARTMENT OF THE
Sub-tier
DEPARTMENTAL OFFICES
Office
IBC ACQ SVCS DIRECTORATE (00004)
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
- Updated Published Date: Aug 21, 2025 02:19 pm EDT
- Original Published Date: Aug 04, 2025 08:34 am EDT
- Updated Date Offers Due: Aug 25, 2025 08:00 pm EDT
- Original Date Offers Due: Aug 15, 2025 08:00 pm EDT
- Inactive Policy: 15 days after date offers due
- Updated Inactive Date: Sep 09, 2025
- Original Inactive Date: Aug 30, 2025
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 2510 - VEHICULAR CAB, BODY, AND FRAME STRUCTURAL COMPONENTS
-
NAICS Code:
- 336211 - Motor Vehicle Body Manufacturing
-
Place of Performance:
7212 12th Street JBER , AK 99506USA
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Note: This acquisition is subject to the availability of funds.
INTRODUCTION: The AFCEC has a requirement to upgrade a 2024 Ford F-550 Dual Rear Wheel cab and chassis truck with a new steel utility truck bed. The Government is seeking a contractor to provide and install a new steel utility truck bed on the vehicle as specified below. The AQD is issuing this competitive RFQ as 100% set aside for small business.
OVERVIEW OF THE REQUIREMENT: This acquisition is to provide and install the exact required commercial end item of supply with the required specifications below on or before December 1, 2025. The Government intends to drop-off and pick-up the vehicle at the location of installation given the driving distance does not exceed 100 miles from the address below:
Joint Base Elmendorf-Richardson
7212 12th Street
JBER, Alaska 99506
Vehicle Specifications:
VIN: 1FD0W5HT4PED66045
Model Year: 2024
Build Date: August 2023
Cab to Axle: 60¿
Wheelbase: 179.8¿
Frame Rail Width 34.2¿
Service Truck Bed Specifications and Requirements: The service truck bed to be procured and installed must meet or exceed the following specifications:
Dimensions & Structural Requirements:
Length: 9 Feet 4 Inches
Width: Minimum 94 Inches
Frame Material: Structural skirted steel
Headache Rack: Notched design with steel tube and window bars
Flooring: 1/8 Inch steel, tread plate or diamond plate
Frame Rails: 4 Inch structural channel steel
Tailgate: Fold-down design with latch
Spare Tire Storage
4 Storage Compartments with one being large enough for a drawer toolbox.
Fuel Access: Dual tank Angled fuel fillers
DEF Access: External Fill Towing & Electrical:
Rear Bumper: Rated for 18,000+ lbs. with 2 ½ Inch receiver hitch
Gooseneck Hitch: 30,000 lbs.-rated 2 5/16 Inch ball
Wiring:
7-pin plug in gooseneck well
7-pin female receiver plug with adapter
Lighting & Accessories:
All lighting must meet DOT standards
Integrated license plate mount
Mudflap brackets included
Ability to mount a Transfer/Auxiliary fuel tank.
Additional Modifications to Vehicle:
HD Front ¿Moose Guard¿ Bumper with 25,000 lbs. Winch
2.5 Inch Lift Kit
35x12.50 Offroad capable tires
Emergency light Package
BK Base for mobile radio
Installation Requirements: The selected vendor will be responsible for the full installation of the service bed onto the identified vehicle. Installation must comply with all applicable safety standards, and all wiring, fuel access points, and hitch components must be fully functional and tested prior to delivery.
INTRODUCTION: The AFCEC has a requirement to upgrade a 2024 Ford F-550 Dual Rear Wheel cab and chassis truck with a new steel utility truck bed. The Government is seeking a contractor to provide and install a new steel utility truck bed on the vehicle as specified below. The AQD is issuing this competitive RFQ as 100% set aside for small business.
OVERVIEW OF THE REQUIREMENT: This acquisition is to provide and install the exact required commercial end item of supply with the required specifications below on or before December 1, 2025. The Government intends to drop-off and pick-up the vehicle at the location of installation given the driving distance does not exceed 100 miles from the address below:
Joint Base Elmendorf-Richardson
7212 12th Street
JBER, Alaska 99506
Vehicle Specifications:
VIN: 1FD0W5HT4PED66045
Model Year: 2024
Build Date: August 2023
Cab to Axle: 60¿
Wheelbase: 179.8¿
Frame Rail Width 34.2¿
Service Truck Bed Specifications and Requirements: The service truck bed to be procured and installed must meet or exceed the following specifications:
Dimensions & Structural Requirements:
Length: 9 Feet 4 Inches
Width: Minimum 94 Inches
Frame Material: Structural skirted steel
Headache Rack: Notched design with steel tube and window bars
Flooring: 1/8 Inch steel, tread plate or diamond plate
Frame Rails: 4 Inch structural channel steel
Tailgate: Fold-down design with latch
Spare Tire Storage
4 Storage Compartments with one being large enough for a drawer toolbox.
Fuel Access: Dual tank Angled fuel fillers
DEF Access: External Fill Towing & Electrical:
Rear Bumper: Rated for 18,000+ lbs. with 2 ½ Inch receiver hitch
Gooseneck Hitch: 30,000 lbs.-rated 2 5/16 Inch ball
Wiring:
7-pin plug in gooseneck well
7-pin female receiver plug with adapter
Lighting & Accessories:
All lighting must meet DOT standards
Integrated license plate mount
Mudflap brackets included
Ability to mount a Transfer/Auxiliary fuel tank.
Additional Modifications to Vehicle:
HD Front ¿Moose Guard¿ Bumper with 25,000 lbs. Winch
2.5 Inch Lift Kit
35x12.50 Offroad capable tires
Emergency light Package
BK Base for mobile radio
Installation Requirements: The selected vendor will be responsible for the full installation of the service bed onto the identified vehicle. Installation must comply with all applicable safety standards, and all wiring, fuel access points, and hitch components must be fully functional and tested prior to delivery.
Attachments/Links
Contracting Office Address
- 381 ELDEN STREET SUITE 2000A
- HERNDON , VA 20170
- USA
Primary Point of Contact
- Szczesniak, Scott
- scott_szczesniak@ibc.doi.gov
- Phone Number 0000000000
Secondary Point of Contact
- Aug 21, 2025 02:19 pm EDTCombined Synopsis/Solicitation (Updated)
- Aug 12, 2025 03:06 pm EDT Combined Synopsis/Solicitation (Updated)
- Aug 06, 2025 04:01 pm EDT Combined Synopsis/Solicitation (Updated)
- Aug 04, 2025 10:20 am EDT Combined Synopsis/Solicitation (Updated)
- Aug 04, 2025 08:34 am EDT Combined Synopsis/Solicitation (Original)
Related Document
| Aug 4, 2025 | [Combined Synopsis/Solicitation (Updated)] 25--Steel Utility Truck Bed and Installation Elmendorf |
| Aug 6, 2025 | [Combined Synopsis/Solicitation (Updated)] 25--Steel Utility Truck Bed and Installation Elmendorf |
| Aug 12, 2025 | [Combined Synopsis/Solicitation (Updated)] 25--Steel Utility Truck Bed and Installation Elmendorf |
Get Government Bids Like This by Email
Receive daily bid alerts that match your keywords, business categories, and target regions.
See Also
Follow LRS Replacement/Maintenance Parts Active Contract Opportunity Notice ID FA500026_PKC_TmA01 Related Notice Department/Ind.
DEPT OF DEFENSE
Due by 9/15/2026
Follow LRS Replacement/Maintenance Parts Active Contract Opportunity Notice ID FA500026_PKC_TmA01 Related Notice Department/Ind.
DEPT OF DEFENSE
Due by 9/15/2026
* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.