Sole Source for an TraNet EPC AE-DAQ from Elsys

Bid #	Description	Closing Date & Time
Sole Source	Sole Source for an TraNet EPC AE-DAQ from Elsys Consisting of the following: TraNET EPC Base Device Industrial PC in a 19" case up to 32 channels Intel i5 or better CPU, 8 GB RAM, SSD System drive, 1 TB Data Drive Windows 10 OS (without Monitor) TPCE-LE-1014-4S DAQ Module 4-ch SE, 2-ch DIFF, 10 MS/s 14 Bit 4x32M onboard memory Input Ranges: ±100mV - ±25V Opt-ECR Event Controlled Recording TranAX 4.2 DAQ Application Software (Full Version) Incl. FFT, X/Y, Measurement Flow Control (MFC) Amp-BU-20-AE Amplifier Base Unit for max. 10 AE-Amp (20 channels) 19'' Rack format including: - Central Power Supply - USB Interface - Pulse Trigger Output - HV Multiplexer AE-Amp 2-Channel Amplifier for AE-Sensors Gain 20, 40, 60 dB Bandwidth: 10 kHz - 1.5 MHz ICP/IEPE Current source 4 - 50 mA High Voltage Pulse Through Input RS485 Interface BNC Cable AE-Amp->DAQ EL-DAQ-Strain-Voltage - 1x NI cDAQ-9189 8 with 8 Slots and Ethernet port - 3x NI 9237, 12 Channel Strain Input, 10kS/s - 2x NI 9202, 32 Channel Voltage Input, 10kS/s - Incl. Power Supply and Table mounting kit - Elsys-NI cDAQ Gateway Software Licence - incl. TraNET-cDAQ Timebase synchronization Questions, contact jill.ballard@usu.edu	12/06/2022 3:00 PM

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.