SKI BOOTS

Agency: DEPT OF DEFENSE
State: Colorado
Type of Government: Federal
FSC Category:
  • 84 - Clothing, Individual Equipment, and Insignia
NAICS Category:
  • 316210 - Footwear Manufacturing
Set Aside: Total Small Business Set-Aside (FAR 19.5)
Posted Date: Jun 30, 2025
Due Date: Jul 7, 2025
Solicitation No: W911S225U1039
Original Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page

Description

Follow
SKI BOOTS
Active
Contract Opportunity
Notice ID
W911S225U1039
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE ARMY
Major Command
AMC
Sub Command
ACC
Sub Command 2
MISSION INSTALLATION CONTRACTING COMMAND
Sub Command 3
419TH CSB
Office
W6QM MICC-FT DRUM
Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information
  • Contract Opportunity Type: Combined Synopsis/Solicitation (Original)
  • Original Published Date: Jun 30, 2025 02:03 pm MDT
  • Original Date Offers Due: Jul 07, 2025 02:50 pm MDT
  • Inactive Policy: Manual
  • Original Inactive Date: Jun 30, 2026
  • Initiative:
    • None
Classification
  • Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
  • Product Service Code: 8430 - FOOTWEAR, MEN'S
  • NAICS Code:
    • 316210 - Footwear Manufacturing
  • Place of Performance:
    7465 BAD TOELZ ROAD FORT CARSON COLORADO, 80913 80913
Description
Dynafit Pro Radical The boot cuff, boot shell, and boot spoiler must be constructed with Grilamid. Total boot weight should be around 1400 grams with a cuff rotation of at least 60 degrees and a flex rating of 120. The boot should have an 11 degree forward lean and a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 103.5 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x2 SIZE 27 x10 SIZE 28 x11 SIZE 29 x10 SIZE 30 x8 SIZE 31 x4 SIZE 32 x3Scarpa Maestrale The boot shell must be constructed with Grilamid BIO with a carbon core. The boot cuff must be constructed of Pebax Rnew with a carbon core. Total boot weight should be around 1470 grams with a cuff rotation of at least 60 degrees and a flex rating of 125. The boot should have a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 102 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x1 SIZE 27 x4 SIZE 28 x3 SIZE 29 x3 SIZE 30 x2 SIZE 31 x2 SIZE 32 x1 Tecnica Zero G The boot shell must be constructed with Grilamid. The boot cuff must be constructed of Co-Injected Carbon. Total boot weight should be around 1280 grams with a cuff rotation of at least 65 degrees and a flex rating of 130. The boot should have a 14 degree forward lean and a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 99 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x1 SIZE 27 x4 SIZE 28 x3 SIZE 29 x3 SIZE 30 x2 SIZE 31 x2 SIZE 32 x1
Attachments/Links
Contact Information
Contracting Office Address
  • MICC FORT DRUM 4205 PO VALLEY RD
  • FORT DRUM , NY 13602-5220
  • USA
Primary Point of Contact
Secondary Point of Contact
History
  • Jun 30, 2025 02:03 pm MDTCombined Synopsis/Solicitation (Original)
Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.
View Sample Report Start Free Trial

See Also

ALPINE COLD WEATHER BOOTS

Follow ALPINE COLD WEATHER BOOTS Active Contract Opportunity Notice ID W912LC26Q0059 Related Notice

DEPT OF DEFENSE

Due by 9/23/2026

* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.