|
Purpose of this Advance Proposed Procurement Notice:
This is an advance notice for the procurement of a Contractor to complete 6 culvert replacements near Foam Lake, Saskatchewan. Please note that all quantities and project details are subject to change. This tender will have a shortened advertising period and will have an early completion date. The work is expected to take place as early as June 2026, with a specified completion date as early as August 31, 2026. The Ministry reserves the right to not proceed with advertising this work.
Description of the Procurement:
SUPPLY AND INSTALLATION OF ONE 1 000 mm DIAMETER, ONE 1 800 mm DIAMETER, AND FOUR 2 200 mm DIAMETER POLYMER LAMINATED CORRUGATED STEEL PIPE CULVERTS by open excavation of the Roadway on Highway No. 310, approximately 5 km south of its junction with Highway No. 16; for a TOTAL LENGTH OF 176 m.
Any questions regarding the above can be sent to
RFXquestions@gov.sk.ca
ca with the subject line: “H26048- Advance Notice”.
Tender documents will be added when available.
|
|
Estimated quantities of materials (subject to change):
The following quantities are initial design estimates and are subject to change in the issued tender documents.
Proposed culverts:
(51.596253, -103.539308) 1 – 2 200 mm x 27 m long, Polymer Laminated Corrugated Steel Pipe, 125 mm x 25 mm corrugations, 2.0 mm wall thickness
(51.592751, -103.539350) 1 – 2 200 mm x 26 m long, Polymer Laminated Corrugated Steel Pipe, 125 mm x 25 mm corrugations, 2.0 mm wall thickness
(51.587907, -103.539334) 1 – 2 200 mm x 31 m long, Polymer Laminated Corrugated Steel Pipe, 125 mm x 25 mm corrugations, 2.0 mm wall thickness
(51.579564, -103.539307) 1 – 2 200 mm x 37 m long, Polymer Laminated Corrugated Steel Pipe, 125 mm x 25 mm corrugations, 2.0 mm wall thickness
(51.52194, -103.53925) 1 – 1 800 mm x 28 m long, Polymer Laminated Corrugated Steel Pipe, 125 mm x 25 mm corrugations, 2.0 mm wall thickness
(51.62336, -103.53941) 1 – 1 000 mm x 27 m long, Polymer Laminated Corrugated Steel Pipe with 68 mm x 13 mm corrugations, 2.0 mm wall thickness, or High Density Polyethylene Pipe, or Reinforced Concrete Pipe
Granular Base Course – 1 220 t
Asphalt Concrete – 410 t
Riprap Type 1 – 460 m3
Riprap Type 2 – 315 m3
Granular Backfill – 4 700 t
Approximate Embankment Height = 4.0 m (27 m x 2 200 mm culvert), 3.3 m (26 m x 2 200 mm culvert), 5.0 m (31 m x 2 200 mm culvert), 6.6 m (37 m x 2 200 mm culvert), 4.5 m (28 m x 1 800 mm culvert), 2.6 m (27 m x 1 000 mm culvert)
The contractor will be responsible for supplying borrow material, granular backfill, geotextiles, riprap, granular base course, asphalt concrete, culvert markers, and erosion&
|