RFQ IN202501 - Bridge Overlay BF 79971
| Agency: | Government of Alberta |
|---|---|
| State: | Alberta |
| Type of Government: | State & Local |
| Posted Date: | Feb 11, 2025 |
| Due Date: | Feb 28, 2025 |
| Solicitation No: | AB-2025-01107 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
Open & competitive opportunity
Open
Municipal District of Taber
Request for Quotes
Scope of Services
The work includes but not limited to “Asphalt Bridge Overlay”.
• Mill butt joints 10m from abutment joints to ensure smooth transition.
• Thoroughly clean bride deck surface prior to overlay commencement.
• Supply and Place 300mm wide membrane reinforcing Fabric over girder joints – Petro-Tac 4591 Self Adhesive Paving Membrane, or an approved equivalent.
• Supply and Install minimum 50 mm depth Type III (City of Lethbridge spec or equivalent) ACP (including tack coat). The bridge dimensions are approximately 34.5m long by 8.4m, an additional 10m each side of the bridge
• Install a Beram joint at each bridge abutment joint (See “Typical Beram Joint Detail” below) acceptable products include, or an approved equivalent:
o ASPH-13, HC200 Husky, W.R. Meadows
o Deery 3723 crack sealant
o Plastasphalt
• Provide line painting on new overlay to Alberta TEC specifications.
• Successful contractor will be responsible for submitting a traffic accommodation strategy including signage and flagging if necessary. The bridge should always have one lane open during the construction of this project.
All work required (traffic accommodation, labor, materials, etc.) to complete the above noted items will be considered incidental and no separate or additional payments will be made. Quantities are estimated and will be paid as per field measurements.
Unless explicitly stated by the MD, all materials and activities included in the scope of services shall be in accordance with:
GENERAL SPECIFICATIONS AND SPECIFICATION AMENDMENTS FOR HIGHWAY AND BRIDGE CONSTRUCTION
Alberta Transportation Edition 16-2019 or more recent revision
STANDARD SPECIFICATIONS FOR HIGHWAY CONSTRUCTION
Alberta Transportation Edition 16-2019 or more recent revision
Where Alberta Transportation or Department, shall mean Municipal District of Taber (MDT)
and Engineer or Consultant, shall mean the Manager of Infrastructure and Public Works (MDT).
All work must be completed by September 1st, 2025.
APC Reference #
AB-2025-01107
Category
Construction
Posting Date • Time
Feb 10, 2025 • 11:27 am (MT)
Closing Date • Time
Feb 28, 2025 • 2:00:00 pm (MT)
Region(s) of Delivery
Alberta, Municipal District of Taber, Taber
Get Government Bids Like This by Email
Receive daily bid alerts that match your keywords, business categories, and target regions.
See Also
Basic Information APC Reference # AB-2026-06406 Internal Reference # 26-0211 Title RFQ 26-0211
Government of Alberta
Due by 10/21/2026
Basic Information APC Reference # AB-2026-06298 Internal Reference # 2026-613-07 Title upply and
Government of Alberta
Due by 10/14/2026
* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.