RFQ - FORD POLICE INTERCEPTOR UTILITY VEHICLES (RESERVED FOR LOCAL BUSINESSES)

County of San Diego Date Issued: March 11, 2026
REQUEST FOR QUOTATION
(this RFQ is a request for information, not an order)
RFQ Number: 13098 CONTRACTING OFFICER:
NINE (9) 2026 OR NEWER/UNUSED
RFQ TITLE: FORD POLICE INTERCEPTOR Christoher Almazan, Procurement Specialist
UTILITY VEHICLES
QUOTATIONS
April 9, 2026; 5:00 PM Phone: (858) 463-8779
DUE:
QUESTIONS DUE: April 2, 2026; 5:00 PM Email: christopher.almazan@sdcounty.ca.gov
AWARD: Will be based on:
SUBMITTING YOUR QUOTATION:
EACH ITEM EACH LOT
Submit your response, including completed forms via BuyNet.
TOTAL (ALL ITEMS)
DESCRIPTION
THE COUNTY OF SAN DIEGO IS SEEKING QUOTES FROM QUALIFIED FIRMS (OFFERORS) TO PROVIDE NINE
(9) 2026 OR NEWER/UNUSED FORD POLICE INTERCEPTOR UTILITY VEHICLES IN ACCORDANCE WITH THE
TERMS & CONDITIONS CONTAINED WITHIN.
IN ACCORDANCE WITH BOARD OF SUPERVISORS (BOS) MINUTE ORDER (MO) 6, DATED JANUARY 28,
2025, THE COUNTY RESERVES THIS RFQ FOR LOCAL BUSINESSES. THE REFERENCED BOS MO CAN BE
FOUND HERE: https://file.sandiegocounty.gov/COB/COBPublicView?FileId=39963834
FOR THE PURPOSES OF THIS RFQ, "LOCAL BUSINESS" MEANS A PARTNERSHIP, CORPORATION, JOINT
VENTURE, OR ANY OTHER ASSOCIATION FORMED TO CONDUCT BUSINESS, OR AN INDIVIDUAL, THAT: (I)
MAINTAINS ITS INTERNATIONAL OR DOMESTIC HEADQUARTERS WITHIN THE GEOGRAPHIC BOUNDARIES
OF SAN DIEGO COUNTY; OR (II) AT THE TIME THE COUNTY ISSUES THE SOLICITATION, PROVIDES OR SELLS
FROM A LOCATION WITHIN THE GEOGRAPHIC BOUNDARIES OF SAN DIEGO COUNTY THE SAME OR
SIMILAR GOODS OR SERVICES TO BE PURCHASED BY THE COUNTY. THE COUNTY'S DETERMINATION
REGARDING WHETHER AN OFFEROR QUALIFIES AS A "LOCAL BUSINESS" SHALL BE FINAL.
SEE EXHIBIT A - STATEMENT OF WORK FOR A DETAILED DESCRIPTION OF THE COUNTY'S
REQUIREMENTS.
THIS REQUEST FOR QUOTATION INCLUDES AN RFQ SUBMISSION CHECKLIST TO BE COMPLETED BY
OFFERORS.
SUBMITTALS WILL BE EVALUATED BASED UPON PRICE AND PERFORMANCE FACTORS INCLUDING THE
OFFEROR'S EXPERIENCE, QUALIFICATIONS, TECHNICAL APPROACH, ACCEPTANCE OF THE COUNTY'S
DRAFT AGREEMENT, PHYSICAL AVAILABILITY OF VEHICLE, VEHICLE SPECS, AND DELIVERY LEAD TIME.
.

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
SUBMISSION CHECKLIST
SUBMISSION CHECKLIST
Submit a completed and signed Offeror's Cover Page (PC600) form
* https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC600_dpc_Offerors_Cover_Page.pdf
Submit a completed and signed Representations and Certifications form (PC601)
* https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC601_dpc_Reps_and_Certs.pdf
Submit a completed and signed Small-Local Business Self-Certification Form (PC610)
* All Offerors are encouraged to complete this form to support County data collection.
* https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC610_dpc_Small_Local_Self_Cert.pdf
Submit a completed and signed Nondisclosure Indemnification Agreement (PC620) (if applicable).
* Required if submitting Confidential/Proprietary Information (see information in Terms and Conditions below)
* https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/PC620_dpc_Nondisclosure_Indemnity.pdf
Submit a completed Pricing Schedule.
* (Page 20),
/
/
/
Page 2 of 26

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
TERMS AND CONDITIONS OF REQUEST FOR QUOTATION
RESPONSES: Your response is due through electronic upload to BuyNet on the specified close date and time, local San
Diego time. If Offeror is unable to submit via BuyNet for any reason, Offeror may submit by email or mail to the listed
Contracting Officer, or by personal delivery to the Purchasing and Contracting front desk. Please use these methods only if
unable to submit through BuyNet. If mailed or delivered, the above RFQ No. should be included on the front of the envelope.
It is the Offeror's responsibility to submit based on the most current RFQ, addenda thereto, responses to Questions, any
other information posted on BuyNet, and any diligence material made available by the County. Offerors are advised to
regularly check BuyNet for information. The County has no obligation to contact Offerors directly with any such RFQ-
related information.
* In order to see all information related to this RFQ, to submit Questions, and to receive notifications of updates,
Offerors must select "Participate in RFx" for this solicitation in BuyNet.
Forms required to be submitted with Offeror's Quotation are included in this RFQ or posted on the County's web site at
https://www.sandiegocounty.gov/content/sdc/purchasing/purchasing-forms.html. Posted forms may be updated from time
to time. Unless otherwise specified, Offerors may submit the version of a form in place as of the date of RFQ issuance or
any later version.
This is a request for information, and quotations furnished are not offers.
QUESTIONS: Please submit questions and requests for clarification related to definition or interpretation of this RFQ in
writing to the contracting officer before the Questions Due date/time listed in this RFQ. Those received after this date may
not be answered at the discretion of the County.
PRICING: The County may award a contract on the basis of initial quotations. Your price(s) should be the lowest possible
for the RFQ requirements. Omit Sales and Use Taxes unless otherwise specified.
The Estimated Quantities in the Pricing Schedule are provided solely for evaluation of quotations. They represent
approximate anticipated use based on historical consumption. If the County's actual requirements do not result in orders in
the quantities described as "estimated" in the Schedule, that fact shall not constitute the basis for price adjustment.
EVALUATION AND AWARD. Quotations are subject to acceptance at any time within 90 days after submission due
date/time, unless otherwise stipulated by the County. This RFQ is an informal negotiated procurement process. Lowest price
may not always be the sole criteria for award of an RFQ. The County reserves the right to waive a variation in specification
if, in the opinion of the County, such variation does not materially change the item or its performance within parameters
acceptable to the County. The County reserves the right to reject any or all quotations and to accept or reject any item(s)
thereon, or waive any informality in the quotation. The County reserves the right to perform a pre-award survey of the
offeror to determine capability to perform, including but not limited to facilities, financial responsibility, materials/supplies,
and past performance. The determination of the County as to an Offeror's prospective ability to perform the contract shall
be conclusive.
SAMPLES: Samples, at Offeror's expense, may be required for evaluation by the County. Delivery of sample must be
scheduled with contracting officer and provided within required timeline. The County shall have the right to review sample
and to determine if such sample is acceptable. The County's decision to award is contingent upon its acceptance of the
products provided in the sample. During the term of the award, the County must approve any substitutions from the initial
sample in writing in advance of substitution. In no event shall the supplier be permitted to increase prices on the basis of
substituted item(s).
Sample, if not destroyed by tests, will, upon request, be returned at Offeror's expense. Offeror must advise contracting
officer at time of sending sample that they must be returned, provide return address and Federal Express account number.
BRAND NAME OR EQUAL: If items called for in this Request for Quotation have been identified in the schedule by a
"brand name or equal" description, such identification is intended to be descriptive, but not restrictive, and is to indicate the
Page 3 of 26

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
quality and characteristics of products (including products of brand name manufacturer s other than the one described by
the brand name) to be considered for award if such products are determined by the County to meet fully the salient
characteristic requirements listed in the request.
Unless the offeror clearly indicates in the quotation that an "or equal" product is being offered, quotation shall be considered
as offering the brand name product specified.
If the offeror proposes to furnish an "equal" product, the brand name, if any, of the product to be furnished shall be inserted
in the space provided in the request for quotation, or such product shall be clearly identified in the quotation. The evaluation
of the quotation and the determination as to equality of the product offered shall be the responsibility of the County and will
be based upon the information furnished by the offeror, or identified in the quotation as well as other information reasonably
available to the purchasing activity. Caution to offerors: the purchasing activity is not responsible for locating or securing
any information which is not identified in the quotation and reasonably available to the purchasing activity. Accordingly,
to insure that sufficient information is available, the offeror must furnish, as part of the quotation, all descriptive material
(such as cuts, illustrations, drawings, or other information) necessary for the purchasing activity to (i) determine whether
the product offered meets the salient characteristic requirements of the request for quotation, and (ii) establish exactly what
the offeror proposes to furnish and what the County is binding itself to purchase by making an award. The information
furnished may include specific references to information previously furnished or to information otherwise available to the
purchasing activity.
If the offeror proposes to modify a product so as to make it conform to the requirements of the Request for Quotation, he
shall (i) include in the quotation a clear description of such modifications and (ii) clearly mark any description to show the
proposed modifications.
DUTY TO INQUIRE: Should the Offeror find discrepancies in or omissions from the RFQ, plans, specifications or other
documents, or should the Offeror be in doubt as to their meaning, the Offeror must at once notify the Buyer, in writing. If
the point in question is not clearly and fully set forth, a written addendum will be issued and emailed to Offerors.
CONFIDENTIAL/PROPRIETARY INFORMATION: If confidential/proprietary is contained within the submission:
1) It must be submitted in a separate file or document marked as EXHIBIT-CONFIDENTIAL/PROPRIETARY;
2) Responses to solicitation requirements that include the confidential/proprietary information, shall refer to the
response contained within the EXHIBIT-CONFIDENTIAL/PROPRIETARY (for example: If submittal
requirement #1 requires staff Social Security Numbers, the response to requirement #1 shall reflect "see response
#1 contained within Exhibit-Confidential/Proprietary"); and
3) It must include a signed Nondisclosure Indemnification Agreement (PC620).
NOTE: As a Public Agency, the County of San Diego must adhere to the California Public Records Act, therefore pricing
cannot be considered confidential/proprietary.
TERMS OF RESULTING CONTRACTS: Any purchase order(s) issued as a result of an RFQ will contain the County's
standard Purchase Order (PO) terms and conditions and any additional terms and conditions referenced in this RFQ. The
County's PO Terms and Conditions are available at:
https://www.sandiegocounty.gov/content/dam/sdc/purchasing/docs/dpc_terms_and_conditions.pdf
Any contract(s) resulting from this RFQ will be based upon the Draft Agreement included in this RFQ. The Statement of
Work, Pricing Schedule, and any other exhibits will be added based upon the successful Offeror's response and successful
contract finalization negotiations.
Payment terms are NET 30, unless terms more favorable to the County are included in Offerors quotation. Note: qualified
Small-Local Businesses may be eligible for more advantageous payment terms including NET15, in accordance with Board
Policy B-53 Small-Local Business Policy (SLBP).
AVAILABILITY OF FUNDING: The County's obligation for payment of any contract beyond the current fiscal year end
is contingent upon the availability of funding from which payment can be made. No legal liability on the part of the County
shall arise for payment beyond June 30 of the calendar year unless funds are made available for such performance.
Page 4 of 26

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
CALIFORNIA REVENUE AND TAXATION CODE SECTION 18662: In compliance with California Revenue and
Taxation code section 18662, if you are a non resident of California (out-of-state invoices) who receives California source
income, the County will pay California Use Tax directly to the State of California per permit no. SR FH 25-632384. Fifteen
(15) business days prior to the first payment, new suppliers or suppliers with expired forms or forms with incorrect
information, must submit new forms to the County (forms are available from the Franchise Tax Board website listed below).
Under certain circumstances you may be eligible for reduced or waived nonresident withholding. If you have already
received a waiver or a reduced withholding response from the State of California and the response is still valid, submit the
response to the County in lieu of the forms. Failure to submit the required forms will result in withholding of payments.
Refer to the Franchise Tax Board websites (listed below) for tax forms and information on nonresident withholding,
including waivers or reductions. The County will not give you any tax advice. It is recommended you speak with your tax
adviser and/or the State of California for guidance.
Franchise Tax Board Websites:
https://www.ftb.ca.gov
https://www.ftb.ca.gov/forms/search/
/
/
/
Page 5 of 26

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
STATEMENT OF WORK
GENERAL
The County of San Diego has a requirement for Nine (9) 2026 or newer, Ford Police Interceptor Utility Vehicles or equal as per
the following requirements. These vehicles shall be configured per the following specifications for various uses throughout San
Diego County
1. Base Vehicle - Ford Utility Police Interceptor Ecoboost
1.1. Vehicle Snapshot
1.1.1 Model: Utility Police Interceptor AWD (K8A)
1.1.2 Engine/Transmission:
1.1.2.1 3.0L V6 EcoBoost (99C)
1.1.2.2 Transmission 10-Speed Automatic Transmission (44U)
1.1.3 Interior Equipment Group: 500A
1.1.4 Interior color: Cloth Front Buckets Vinyl Rear (9W)
1.1.5 Exterior color: Agate Black (UM)
2. Factory Vehicle Options
2.1. Underbody Deflector Plate (Option Code = (76D)
2.2. Hidden Door-Lock Plunger w/Rear-door controls inoperable (52P)
2.3. Spot Lamp LED Driver & Passenger (Option Code =(51S)
2.4. Spot Lamp Prep Kits (51W)
2.5. Keyed Alike - 1284x (Option Code =(59B)
2.6. Front license plate bracket (153)
2.7. Badge Delete (16D)
2.8. Noise Suppression Bonds (Ground Straps) (60R)
2.9. Exterior Paint
2.10. Standard Paint Colors to be determined by County of San Diego Contracting Officer Representative at time of
contract receipt.
2.11. Pricing Sheet Line #B - Additional Aftermarket Paint: The Contractor will be responsible for the performance or
facilitation of the following:
2.11.1. Preparation and Re-Paint of Passenger & Driver's Front Doors & Roof to Color Code (YZ) Ford
Oxford White.
2.11.2. Paint to be factory equivalent in quality and warranty (Vinyl wrap not acceptable)
3. Wireless Automated Fueling System - WAF
3.1. Installation of a commercially available wireless automated fueling system such as ASSETWORKS Fuel Focus
(Or Approved Equivalent in Function & Compatibility)
3.2. System must be installed into vehicle according to manufacturer's specifications.
3.3. System shall be comprised of three components, a Vehicle Identification Box (VIB), Data Link Connector
(DLC) adapter harness and fuel inlet antenna.
3.4. Vehicle Identification Box (VIB) must be the latest available model for purchase and compatibility for the year,
make and model of vehicle being outfitted.
3.5. Data Link Connector (DLC) harness must be compatible with VIB box capabilities and compatible with year,
3.6. make and model of vehicle being outfitted.
3.7. Fuel Inlet Antenna must be the appropriate part for the year make and model of vehicle being outfitted. Antenna
must be securely adhered to the filler neck in a way that does not inhibit proper seal between fuel station filling
nozzles and the vehicles' fuel inlet port. Adhesives used shall be fuel resistant to ensure proper adhesion during
normal vehicle operation.
3.8. Electrical wires providing power, ground and communication shall be conjoined with solder and sealed using
weather resistant heat shrink tubing as per manufacturer's specifications. Electrical power feed to power module
during regular vehicle operation shall use; ignition/run start switched power that ensures module power is
provided sufficiently for proper system operation.
3.9. Wiring between VIB and fuel tank nozzle ring shall be no less than 18 AWG, 3-Conductor, Shielded, with
stranded bare copper conductor such as (Coleman Cable Part# 952184609) or equivalent.
3.10. Initial system installation shall be inspected by county personnel prior to first vehicle's delivery, to ensure proper
installation and function of system. Systems that are installed outside of manufacturer's specifications, or use
wiring that is below standard, shall be refused and payment on submitted invoices will be withheld until the issue
is resolved.
3.11. 2.4.l 0. The battery draw of complete vehicle after outfitting to be less than 50ma.

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
4. FORD UTILITY PATROL OUTFITTING
4.1. Emergency lights and Siren
4.2. Lightbar: (I) SoundOff nForce NXT ENNLB01C0Z-482 or San Diego County approved equivalent LED multi-
color lightbar, 54" in length, graphite color top covers and pursuit rated (2-bolt) mounting kit for 2025 Ford Utility.
See lightbar build sheet for complete configuration specifications. The lightbar shall be installed on the vehicle's
roof centered between the front and rear door jambs. The lightbar shall communicate with the siren controller via
data connection through a cat5 cable. The comer modules on the driver side of the lightbar shall be deactivated when
the driver's door is ajar to preserve the deputy's night vision when exiting and entering the vehicle. (See Exhibit A for
current example)
4.3. Siren Controller: (I) SoundOff Signal (ENGSA5201and ENGCP18003) or San Diego County approved equivalent,
bluePRINT 500 Series Control System. True dual tone 200-watt amplifier capable of producing two independent
tones simultaneously. The siren amplifier and relay module shall be installed on the rear electronics tray. The siren
control head shall be mounted on the vehicle's headliner so as not to obstruct drivers view of the rear-view mirror,
and feature the following controls:
4.3.1. Aux switch I: Left-Right-Center directional light control
4.3.2. 3.l.2.2 Aux switch 2: Left alley light
4.3.3. 3.l.2.3 Aux switch 3: Take Down Lights
4.3.4. Aux switch 4: Right alley light
4.3.5. Aux switch 5: Scene light
4.3.6. 3.l.2.6 Aux switch 6: not used
4.3.7. 3.l.2.7 Aux switch 7: Right spot
4.3.8. 3.l.2.8 Aux switch 8: Gun release (8-second security timer function)
4.3.9. 3.l.2.9 Standby: Places sirens in standby mode
4.3.10. 3.1.2.10 Wail: activates dual tone Wail
4.3.11. 3.1.2.11 Yelp: Activates dual tone Yelp
4.3.12. 3.l.2.12 Tone: Activate Wail and Yelp
4.3.13. 3. l.2.13 Hom: Activates Air Hom
4.3.14. 3.1.2.14 Manual: Activates Manual siren tone
4.3.15. 3.l.2.15 Radio Re-Broadcast: Broadcasts 2-way radio audio on PA system
4.3.16. Slide Switch# I: Rear lightbar, and lightbar steady red/blue LED's
4.3.17. Slide Switch #2: Taillight flasher, blue LED's in reverse lights, under spoiler LED's, Lift gate open LED's
(only when lift gate is open) and the front of the lightbar with red/blue pattern
4.3.18. Slide Switch #3 Park: Grill mounted LED's and under mirror LED's
4.3.19. Slide Switch #3 Drive: Front headlight LED's, headlight flasher and add white flashing LED's on lightbar.
The siren will default to "Tone" and activate wail I yelp when placed in level 3 and in drive gear.
4.3.20. Horn ring transfer via the OEM steering wheel horn switch
4.3.21. l.2.21 The PA microphone shall be mounted on a mic clip located on the center equipment console. The PA
mic will be connected to the overhead siren control panel via extension cable, (I) SoundOff Signal
(PSRN5HDK3) or San Diego County approved equivalent.
4.4. Siren Speakers: (2) SoundOff Signal ETSS100J5 or San Diego County approved equivalent, 100-watt siren speakers
shall be installed in the vehicle lower grill opening with the use of (2) SoundOff Signal brackets ETSSVBK0 I or
San Diego County approved equivalent. The speakers shall be connected directly to the siren amplifier.
4.5. Grill LED's: (I) Red/White SoundOff Signal EMPSCGIQMS3D and (I) Blue/White SoundOffSignal EMPSCG
IQMS3E or San Diego County approved equivalent. The LED warning lights shall be installed in the grill opening
with use of (1) SoundOff Signal PMP2BKDGAJ or San Diego County approved equivalent 90 degree mounting
brackets. Each warning light will have 8-LED's. The red LED light will mount on the driver side and the blue LED
will mount on the passenger side. The LED's will be connected to slide switch position #3 and flash in sync with
each other.
4.6. Under Spoiler LED's: (2) Red/Blue/White LED, SoundOff Signal EMPSCG2STS5RAW or San Diego County
approved equivalent. LED warning lights shall be installed under the rear spoiler with use of (I) SoundOff Signal
PMP2RSI0I or San Diego County approved equivalent mounting brackets. Each warning light will have 12-LED's.
The Red/Amber LED light will mount on the driver side and the blue/amber LED will mount on the passenger side.
The LED's will be connected to slide switch position #2 and flash in sync with each other.
4.7. Exterior Under-Mirror LED's: (1) Red/White SoundOffSignal EMPSCG2STS4D, and (I) Blue/White LED,
SoundOffSignal EMPSCG2STS4E or San Diego County approved equivalent. Intersector LED warning lights shall
be installed under the vehicle's exterior mirrors with the use of mounting brackets (1) SoundOffSignal
PMP2BKUMB8-D for the driver side and (1) PMP2BKUMB8-P or San Diego County equivalent for the passenger
side to provide side warning signal. Each warning light will have 9-LED's. The red LED light will mount on the
driver side and the blue LED will mount on the passenger side. The LED's will be connected to slide switch position
#3 and flash in sync with each other.

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
4.8. Headlight Mounted LED's: (1) Red/white SoundOff Signal ELUC3H0 IOD and (I) Blue/white SoundOff Signal
ELUC3H0I0E or San Diego County approved equivalent, 6-LED warning lights shall be installed in the vehicles
headlight housings with use of two (2) SoundOff Signal PLUCTCLI twist lock adapaters. Each warning light will
have 6-LED's. The red/white LED light will mount on the driver side and the blue/white LED will mount on the
passenger side. The LED's will be connected to slide switch position #3 in drive and flash in sync with each other.
4.9. Tail Light Mounted LED's: (2) Blue, SoundOff Signal ELUC3H0 I0B or San Diego County approved equivalent
universal undercover LED insert warning lights shall be installed in the vehicles tail light housings. The warning
lights will be installed with (2) SoundOff Signal PLUCTCLI or San Diego County approved equivalent twist-lock
adapters. The blue LED's will be placed in the clear reverse lens of the taillight. Each warning light will have 6-
LED's. The LED's will be connected to slide switch position #2 and flash in sync with each other.
4.10. Lift Gate Open Mounted LED's: Lift Gate Open Mounted LED's: (2) Red/Blue, SoundOff Signal EMPSCG1SLS3J
or San Diego County approved equivalent. Recessed mount LED warning lights shall be installed in the interior trim
panel of the rear lift gate. The LED's shall be visible when the lift gate is open. The LED's will be connected to slide
switch position #2 and only activated when the lift gate is open. The lights shall flash in sync with each other.
4.11. Headlight and Taillight Flasher: Activate OEM headlight (Wig/Wag) with ground activation from siren controller
(Level 3 in drive). Tail lights will flash via bluePRINT system and flash in coordination with all other warning
lights.
4.12. Center Equipment Console and Computer Mount
4.12.1. Computer Dock and mounting system
4.12.1.1. One Gamber Johnson Dell Laptop Dock 7170-1090-03
4.12.1.2. One Gamber Johnson Motion attachment 7160-2000-09
4.13. Center Equipment Console: (1) Gamber Johnson 7170-0735-00 or San Diego County approved equivalent shall be
installed between the front seats to support the installation of the radio control head and other related components.
The console will support a total of 22" of equipment faceplate mounting. IO" will be at an angle with the remaining
12" in a level horizontal section. The console will install form fitting to the vehicle's dash panel. The console will
include (2) DC power ports between the angled and level faceplate sections. The OEM USB and 3.5mm audio ports
will be relocated to the passenger side of the console. The console package will include the following equipment
mounting brackets, filler panels and console accessories:
4.13.1. Gamber Johnson 7160-0459 Motorola DEK face plate
4.13.2. Gamber Johnson 7160-0321 Motorola apx face plate
4.13.3. Gamber Johnson 15082 faceplate
4.13.4. Damavo B08DD4BH6G power outlet
4.13.5. Gamber Johnson 7160-0332 console pocket
4.13.6. Casco 11010 power port and 11011 power port cap
4.13.7. Havis C-MCB or San Diego County approved equivalent, Microphone mounting brackets installed on the
right track rail of the console for the mounting of the radio and PA microphones
4.13.8. Magnetic Mic MMBP-25 or San Diego County approved equivalent, magnetic microphone mounts
installed on the mounting brackets. The magnetic mounts will be used for the radio and PA microphone.
4.13.9. (I) Adapter shall be installed on the PA mic and the (I) adapter with set screw for the radio mic shall be
placed in a sealed bag and placed in the beverage holder.
4.13.10. Maxxima M84434RW-A 6" led dome light red/white installed on headliner.

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
4.14. Radio Communications
4.14.1. The Contractor shall provide all required pre-cabling of radio antennas, control cables and power cables to
support the final installation of the radio equipment by the County. The specifications listed below are
minimum requirements and are subject to approval by Sheriff Wireless and Data Services, before the
construction and delivery of the first vehicle. All cable lengths at the front center equipment console and
the rear electronics tray must be sufficient to allow proper placement of components by the County.
4.14.2. 800MHz Radio Antenna: (I) Larsen MB8UMI or San Diego County approved equivalent, antenna NMO
mount/cable shall be installed on the roof centered left-to-right and 23" from the rear roofs edge. The
antenna coaxial cabled is to be routed to the equipment mounting tray in the rear of the vehicle and labeled
"Radio Antenna". (I) Larsen NMO3E800B or San Diego County approved equivalent, 806-866MHz
antenna mast shall be installed on the NMO.
4.14.3. Radio Control Head Cable: (I) Motorola HKN6169B or San Diego County approved equivalent, radio
control head cable shall be routed from the front center equipment console to the rear equipment mounting
tray.
4.14.4. Radio Control Head Pre-Wire: Pre-wire for the radio control head (Motorola XTL or APX -05 remote
head)
4.14.5. located in the center console must include the following circuits. A label must be affixed to the radio
control head wire bundle to clearly identify the circuits.
4.14.5.1. 16awg Red/Black wire printed "Radio Head" to provide constant 12V from the rear fuse panel
circuit #2
4.14.5.2. 16awg yellow wire printed "Radio 2" to provide ignition from an ignition sense wire. Could be
the same used for the gun lock ignition wire.
4.14.5.3. 16awg black wire printed "ground" to provide ground sourced from a factory ground location.
4.14.5.4. 18/2 speaker wire for connection to the radio's audio output to allow the siren to perform the
radio re- broadcast (RRB) feature.
4.14.6. Radio Transceiver Pre-Wire: Pre-wire for the radio transceiver (Motorola XTL or APX -05 remote head)
4.14.7. located on the rear equipment tray must include the following circuits. A label must be affixed to the radio
transceiver wire bundle to clearly identify the circuits.
4.15. Data Communications
4.15.1. The Contractor shall provide all required pre-cabling of data antennas, computer control cables and power
cables to support the final installation of the computer equipment by the County. The specifications listed
below are minimum requirements and are subject to approval by Sheriff Wireless and Data Services, before
the construction and delivery of the first vehicle. All cable lengths at the front center equipment console
and the rear electronics tray must be sufficient to allow proper placement of components by the County.
4.15.2. LTE Antenna: (I) Larsen NMOKHFUDTNCI or San Diego County approved equivalent, high frequency
antenna NMO mount/cable shall be installed centered from left-to-right on roof and have at least 16' of
separation from 800mhz radio antenna. The antenna coaxial cabled is to be routed to the Dell Tablet Dock
in front dash of the vehicle and labeled "Laird TRA6927M3NBN-00I".
4.16. Electrical System
4.16.1. General Electrical System Requirements: All wiring must remain consistent across all Utility vehicle and
configurations. The Contractor must comply with the following specifications and requirements:
4.16.1.1. All wiring must be contained as part of a complete vehicle harness.
4.16.1.2. Wires and cables must be routed consistently in each vehicle.
4.16.1.3. Vendor to supply "as-built" vehicle documentation to include but not limited to:
4.16.1.3.1. Circuit identification 3.5.l.3.2Wire routing diagrams
4.16.1.3.2. 3.5.1.3.3Connection diagrams for all components including siren amplifiers, relays
and fuse panels
4.16.1.3.3. 3.5.l.3.4Complete documentation of all factory wire interfaces (park kill, horn, door
ajar, etc.) 3.5.l.3.5Complete documentation of all OEM fuses that have an effect of
the outfitting package
4.16.1.4. All fuses, relays and spare wires must be clearly labeled as to their function.
4.16.1.5. All wire runs are to be "home runs" with no unnecessary connections in the circuits
4.16.1.6. All wiring shall be cross-linked polyolefin and meet or exceed the following specifications for
resistance to heat and abrasion:
4.16.1.6.1. Chrysler specifications MS 5919
4.16.1.6.2. Ford specifications MIL85-A

COUNTY OF SAN DIEGO
REQUEST FOR QUOTATION (RFQ) 13050 - THIRTEEN (13) 2026 OR NEWER/UNUSED
FORD EXPLORER MODEL ACTIVE 100A WITH OUTFITTING
4.16.1.7. MIL-Specifications MIL-7928
4.16.1.8. Packard specifications M-2023 3.5.1.6.5SAE Specifications 7928 3.5.l.6.6SAE Specifications Jl
128
4.16.1.9. All wiring shall include labeled/ printed wire as to identify the circuit and/or component
4.16.1.10. There shall be (4) spare circuits routed from the console to the under hood. Wires shall be capped
and labeled.
4.16.1.11. There shall be (4) spare circuits routed from the console to the rear electronics tray. Wires shall
be capped and labeled.
4.16.2. Warning System Fuse Panel: For the following item only, Bidder may submit specifications with bid for
County
4.16.3. Evaluation. Bidder shall provide and install a warning system fuse panel that shall house fuses for all
aftermarket components other than the radio and computer and shall be sourced from the fuse panel and
power distribution center. The fuse panel must comply with the following:
4.16.3.1. l The fuse panel will be installed in the rear interior trim panel storage pocket on the passenger
side.
4.16.3.2. The fuse panel will include a vehicle specific mounting system to insure consistent placement on
vehicle.
4.16.3.3. The panel will support(21) ATO fuses and (4) MAXI fuses
4.16.3.4. A solid-state timer will be installed on the panel and set to 30-minute time delay
4.16.3.5. The delay timer will control a Mil-Spec 300-Amp relay to distribute "timed" power to high
current circuits
4.16.3.6. All wire crimp connections at the fuse panel must meet MIL-SPEC standards for pull-test.
4.16.3.7. Fuse Panel housing shall be constructed of metal and wiring shall meet SAE J0l 128 and MIL-
85B standards.
4.16.3.8. Fuse Panel and wiring shall have a warranty no less than 5 years.
4.16.4. The fuse panel will include a labeled fuse cover to identify the following circuits:
4.16.4.1. Fuse #1, Constant, 15-Amp, Headlight Flasher
4.16.4.2. Fuse #2, Constant, JOA Control Head constant power to the front center equipment console.
4.16.4.3. Fuse #3, Constant, Console Spare (CIR 3)
4.16.4.4. Fuse #4, Constant, 10-Amp, Rear Gun Lock (K9)
4.16.4.5. Fuse #5, Constant, Console Spare (CIR 5)
4.16.4.6. Fuse #6, Constant, 5-Amp, Timer
4.16.4.7. Fuse #7, Constant, 20-Amp, Tail Light Flasher
4.16.4.8. Fuse #8, Timed, 5-Amp, Black Out Switch/ Relays
4.16.4.9. Fuse #9, Timed, 30-Amp, Lightbar
4.16.4.10. Fuse #10, Timed, 5-Amp, Lightbar BOB
4.16.4.11. Fuse #11, Timed, 15A Dell Dock Lind power supply in the front center equipment console
4.16.4.12. Fuse #12, Timed, 5-Amp, Rear Dome Light
4.16.4.13. Fuse #13, Timed, 3-Amp, Asset Works VIB
4.16.4.14. Fuse #14, Timed, 5-Amp, Prisoner/K9 Dome Light
4.16.4.15. Fuse #15, (Maxi) Constant, 40-Amp, K9 Electronics
4.16.4.16. Fuse #16, (Maxi) Constant, 20A for radio TR pack in rear equipment tray
4.16.4.17. Fuse #17, (Maxi) Timed, 50-Amp Siren (Lighting Relay Input)
4.16.4.18. Fuse #18, (Maxi) Timed, Open
4.16.4.19. Fuse #19, Timed, Rear Spare
4.16.4.20. Fuse #20, Timed, Rear Spare
4.16.4.21. Fuse #21, Timed, 5-Amp, Radio Control Head
4.16.4.22. Fuse #22, Timed, 20-Amp, Siren Amp
4.16.4.23. Fuse #23, Timed, 15-Amp, Power Outlets
4.16.4.24. Fuse #24, Timed, 5-Amp, Map Light
4.16.4.25. Fuse #25, Timed, Console Spare (flashlight)
4.16.4.26. Fuse #28, 15-Amp, Radio
4.16.4.27. Fuse #29, 10-Amp, Radio Control Head
4.16.4.28. Fuse #32, Open