RFP Public Works RTU and MUA Units
| Agency: | Government of Alberta |
|---|---|
| State: | Alberta |
| Type of Government: | State & Local |
| NAICS Category: |
|
| Posted Date: | Mar 29, 2026 |
| Due Date: | Apr 16, 2026 |
| Solicitation No: | AB-2026-02293 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
Open & Competitive Opportunity
• Request for Proposal
Open
Town of Edson
• Replace three (3) RTU’s on the Public Works building, along with four (4) MUA’s with the eight (8) wall mounted exhaust fans that work in conjunction with the MUA's
• The Public Works building was constructed around 1977 with minimal upgrades having been completed since it was first constructed with an addition that was built on the north side around 1979. This building is approximately 27,800 sq ft or 2,853 sq m. There are currently 3 natural gas fired RTU’s servicing the office area (for heating, cooling and ventilation air), that have reached the expected useful lifespan and display significant damage from weather, 4 natural gas fired make up units (in which 2 have been decommissioned), and 8 wall mounted exhaust fans that work in conjunction with the make-up air units that have also reached the end of their expected lifespan.
The Proponent shall be fully responsible for:
• All engineering required to complete the Deliverables
• Preparation of drawings, specifications, and technical documentation stamped and sealed by a Professional Engineer licensed in the Province of Alberta
• Obtaining all required permits, approvals, and inspections from applicable authorities having jurisdiction
• Ensuring full compliance with all applicable codes, standards, bylaws, and regulations
• Coordination with Town staff, utilities, authorities having jurisdiction, and other stakeholders
• Testing, commissioning, and verification that the Deliverables are fully operational and meet performance requirements
All equipment installed shall comply with the structural roof loading requirements as determined by the building’s structural design. Under no circumstances shall installed units exceed the allowable roof load capacity. The Contractor shall verify and ensure compliance prior to installation.
APC Reference #
AB-2026-02293
Category
Construction
Posting Date • Time
Mar 27, 2026 • 2:50 pm (MT)
Closing Date • Time
Apr 16, 2026 • 2:00:59 pm (MT)
Region(s) of Delivery
Alberta, Edson
Get Government Bids Like This by Email
Receive daily bid alerts that match your keywords, business categories, and target regions.
See Also
Basic Information APC Reference # AB-2026-06601 Internal Reference # 024305 Title RFP FOR
Government of Alberta
Due by 10/15/2026
Basic Information APC Reference # AB-2026-06455 Internal Reference # BCF-09-26-1 Title Passive Investment
Government of Alberta
Due by 10/09/2026
Basic Information APC Reference # AB-2026-06405 Internal Reference # RFP-Consulting Services Title Consulting
Government of Alberta
Due by 10/30/2026
Basic Information APC Reference # AB-2026-06523 Internal Reference # COL-26-165 Title Cost Estimating
Government of Alberta
Due by 10/22/2026
* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.