RFP - Heritage Addition - Electrical Re-Bid | Michigan Government Bid

Agency:	Saline Area Schools
State:	Michigan
Type of Government:	State & Local
Posted Date:	Dec 23, 2025
Due Date:	Jan 6, 2026
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Attachment Preview

12/23/2025

ADDENDUM NO. 1

PROJECT:

DESCRIPTION:

BID PACKAGE RELEASE NUMBER:

Saline Area Schools – 2022 Bond Program –

Addendum No.1

BP #5 (Electrical Re-Bid)

BID PROPOSAL DUE DATE/TIME: 2:00 PM, Tuesday, January 6th, 2026

The following clarifications and/or Changes made to the Contract Documents are hereby

made part of the Contract Documents.

The general character of the Work clarified or revised by this Addendum shall be the

same as required by the complete set of Contract Documents. All incidentals required in

connection with the Work of this Addendum shall be included in the Scope of Work even

though not specifically specified.

All bidders shall be held responsible to review the Addendum and to include in its Bid

Proposal all Work reasonably inferred to be included in its Scope of Work.

Acknowledge receipt of this Addendum in the space provided on the Bid Proposal

Form.

A. Architect/Engineering Documentation

1. VE Markups as issued by Kingscott Associates, Inc. / SES.

B. Division 00 – Bidding and Contract Requirement Modifications:

1. Section 002416 – Scope of Work – Bid Category Specific Notes

i. Bid Category 32 – Landscaping (Not Re-issued)

1. Add Note 27 – Furnish and install topsoil, seed and mulch

in areas outside of the clearing and grubbing area affected

by site logistics. See site logistics plan for more detail.

Assume 3,000 sf of area for the purpose of this bid.

Saline Area Schools – 2022 Bond Program

Bid Release No. 5 Heritage School Additions & Renovations

Addendum No. 001

Page 1 of 2

2. Add Note 28 – This bid category is to include an allowance

of $15,000.

2. Section 004126 – Bid Form

i. Revised and re-issued with additional alternates. (See VE

Markups).

C. Pre-Bid Conference Sign-in Sheet and Presentation

END OF SECTION

Saline Area Schools – 2022 Bond Program

Bid Release No. 5 Heritage School Additions & Renovations

Addendum No. 001

Page 2 of 2

l jh

VE SCOPE: WHERE HALF SHADED FIXTURES

ARE INDICATED, PROVIDE SAME FIXTURE

TYPE WITH EMERGENCY BATTERY OPTION.

COPPER FEEDER SCHEDULE

FEEDER COND.

(AMPS)

SIZE

2 WIRE WITH GROUND

FEEDER COND.

(AMPS)

SIZE

3 WIRE WITH GROUND

FEEDER COND.

(AMPS)

SIZE

4 WIRE WITH GROUND

15S

20S

2#12, 1#12 GND IN 3/4"C

3#12, 1#12 GND IN 3/4"C

15N

20N

4#12, 1#12 GND IN 3/4"C

25S

2#10, 1#10 GND IN 3/4"C

3#10, 1#10 GND IN 3/4"C

25N

4#10, 1#10 GND IN 3/4"C

30S

2#10, 1#10 GND IN 3/4"C

3#10, 1#10 GND IN 3/4"C

30N

4#10, 1#10 GND IN 3/4"C

35S

2#8, 1#10 GND IN 3/4"C

3#8, 1#10 GND IN 3/4"C

35N

4#8, 1#10 GND IN 3/4"C

40S

2#8, 1#10 GND IN 3/4"C

3#8, 1#10 GND IN 3/4"C

40N

4#8, 1#10 GND IN 3/4"C

45S

2#6, 1#10 GND IN 3/4"C

3#6, 1#10 GND IN 3/4"C

45N

4#6, 1#10 GND IN 1"C

50S

60S

70S

2#6, 1#10 GND IN 3/4"C

2#4, 1#10 GND IN 1"C

2#4, 1#8 GND IN 1"C

3#6, 1#10 GND IN 3/4"C

3#4, 1#10 GND IN 1"C

3#4, 1#8 GND IN 1"C

50N

60N

70N

4#6, 1#10 GND IN 1"C

4#4, 1#10 GND IN 1 1/4"C

4#4, 1#8 GND IN 1 1/4"C

80S

90S

100S

2#3, 1#8 GND IN 1"C

2#2, 1#8 GND IN 1"C

2#1, 1#8 GND IN 1 1/4"C

100

3#3, 1#8 GND IN 1"C

3#2, 1#8 GND IN 1 1/4"C

3#1, 1#8 GND IN 1 1/4"C

80N

90N

100N

4#3, 1#8 GND IN 1 1/4"C

4#2, 1#8 GND IN 1 1/2"C

4#1, 1#8 GND IN 1 1/2"C

110

125

3#2, 1#6 GND IN 1 1/4"C

3#1, 1#6 GND IN 1 1/4"C

110N

125N

4#2, 1#6 GND IN 1 1/4"C

4#1, 1#6 GND IN 1 1/2"C

150

1/0

3#1/0, 1#6 GND IN 1 1/2"C

150N

1/0

4#1/0, 1#6 GND IN 2"C

175

2/0

3#2/0, 1#6 GND IN 1 1/2"C

175N

2/0

4#2/0, 1#6 GND IN 2"C

200

3/0

3#3/0, 1#6 GND IN 2"C

200N

3/0

4#3/0, 1#6 GND IN 2"C

225

4/0

3#4/0, 1#4 GND IN 2"C

225N

4/0

4#4/0, 1#4 GND IN 2 1/2"C

250

3-250 KCMIL, 1#4 GND IN 2"C

250N

250

4-250 KCMIL, 1#4 GND IN 2 1/2"C

300

350

3-350 KCMIL, 1#4 GND IN 2 1/2"C

300N

350

4-350 KCMIL, 1#4 GND IN 3"C

350

500

3-500 KCMIL, 1#3 GND IN 3"C

350N

500

4-500 KCMIL, 1#3 GND IN 3 1/2"C

400

600

3-600 KCMIL, 1#3 GND IN 3 1/2"C

400N

600

4-600 KCMIL, 1#3 GND IN 4"C

450

2-4/0

(2) 3#4/0, 1#2 GND IN 2"C

450N

2-4/0

(2) 4#4/0, 1#2 GND IN 2 1/2"C

500

2-250

(2) 3-250 KCMIL, 1#2 GND IN 2 1/2"C

500N

2-250

(2) 4-250 KCMIL, 1#2 GND IN 2 1/2"C

600

2-350

(2) 3-350 KCMIL, 1#1 GND IN 2 1/2"C

600N

2-350

(2) 4-350 KCMIL, 1#1 GND IN 3"C

NOTES:

1. AMPACITIES FOR FEEDER SIZES ARE BASED ON N.E.C. CODE 110-14. (TERMINATION PROVISIONS FOR EQUIPMENT RATED 100A OR LESS ARE RATED FOR USE WITH CONDUCTORS RATED 60°C. TERMINATION PROVISIONS FOR EQUIPMENT RATED GREATER THAN

100A ARE RATED FOR USE WITH CONDUCTORS RATED 75°C.).

2. CONDUIT FILL IS BASED ON 40% FILL USING SINGLE CONDUCTOR BUILDING WIRE OF INSULATION TYPES THHN, THWN, THWN-2, XHH, XHHW, AND XHHW-2 IN RMC. FOR OTHER RACEWAY TYPES REFER TO APPROPRIATE N.E.C. APPENDIX C TABLES.

3. EQUIPMENT GROUND SIZING BASED ON N.E.C. TABLE 250.122.

DRY TYPE TRANSFORMER SCHEDULE - 480VD TO 208Y/120V

KVA

PRIMARY

BREAKER

OR FUSE

FEEDER

(AMPS)

10A

10TP

4.5

15A

15TP

PRIMARY WIRE SIZE

3#12 & 1#12 GND IN 3/4"C

SECONDARY

BREAKER

OR FUSE

FEEDER

(AMPS)

15A

15TS

20A

20TS

SECONDARY WIRE SIZE

4#12 & 1#12 GND IN 3/4"C

12A

12TP

3#12 & 1#12 GND IN 3/4"C

25A

25TS

4#10 & 1#10 GND IN 3/4"C

20A

20TP

3#12 & 1#12 GND IN 3/4"C

35A

35TS

4#8 & 1#10 GND IN 3/4"C

25A

25TP

3#10 & 1#10 GND IN 3/4"C

60A

60TS

4#6 & 1#10 GND IN 1"C

35A

35TP

3#8 & 1#10 GND IN 3/4"C

80A

80TS

4#4 & 1#8 GND IN 1 1/4"C

45A

45TP

3#8 & 1#10 GND IN 3/4"C

110A

110TS

4#2 & 1#6 GND IN 1 1/4"C

70A

70TP

3#4 & 1#8 GND IN 1"C

175A

175TS

4#2/0 & 1#6 GND IN 2"C

125A

125TP

3#1 & 1#6 GND IN 1 1/4"C

300A

300TS

4-350 KCMIL & 1#4 GND IN 3"C

NOTES:

1. THE PRIMARY AND SECONDARY BREAKERS OR FUSES ARE LOCATED IN SWITCHBOARD OR PANELBOARD UNLESS SHOWN OTHERWISE.

2. THE SECONDARY NEUTRAL OF DRY-TYPE TRANSFORMERS SHALL BE GROUNDED PER NATIONAL ELECTRICAL CODE AND LOCAL CODE.

3. THIS TRANSFORMER SCHEDULE IS A MASTER LIST. EVERY TRANSFORMER SIZE LISTED MAY NOT BE USED IN EVERY PACKAGE. SEE PLANS FOR ACTUAL SIZES USED.

LIGHTING CONTROLS LEGEND

SYMBOL

DESCRIPTION

LIGHT CONTROL LOCATION

SWITCH - SINGLE POLE

SWITCH - THREE WAY

SWITCH - FOUR WAY

TECHNOLOGY SYMBOL LIST

SYMBOL

DESCRIPTION

BELL OUTLET

CAMERA

CARD READER

INTERCOM

LOW VOLTAGE PANEL

PUSH BUTTON

SPEAKER - WALL MOUNTED, CEILING MOUNTED

TECHNOLOGY OUTLET - 6" ABOVE COUNTER

TECHNOLOGY OUTLET - FLOOR

TECHNOLOGY OUTLET - WALL

TELEVISION OUTLET

WALL CLOCK - SINGLE FACE

WALL CLOCK - DOUBLE FACE

WALL CLOCK AND SPEAKER UNIT

WAP

WIRELESS ACCESS POINT

NOTES:

1. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR BOX AND CONDUIT FOR

ALL DEVICES INDICATED.

2. LOW VOLTAGE CONTRACTOR SHALL PROVIDE EXACT SPECIFICATIONS AND

LOCATIONS OF ALL DEVICES.

TAG

NUMBER

SPACE TYPE

LIGHTING CONTROLS MATRIX

PARAMETERS

SEQUENCE OF OPERATIONS

ELECTRICAL ABBREVIATIONS

ABBREV.

DESCRIPTION

AFF

AWG

ATS

AIC

DIA

DISC

EWC

EMT

EPO

(E)

FACP

FLA

G/GND

GFCI/GFI

HOA

INV

KVA

KWH

MCB

MDP

MLO

MAX

MIN

NEC

NEMA

N/NEU

NIC

PH/Ø

PVC

(R)

(RR)

RMC

TBB

XFMR

TYP

UPS

USB

UON

ABOVE FINISHED FLOOR

AMERICAN WIRE GAUGE

AMPERE

AMPERE FUSE/AMPERE FRAME

AMPERE TRIP

AUTOMATIC TRANSFER SWITCH

AVAILABLE INTERRUPTING CURRENT (AMPS)

CIRCUIT BREAKER

CONDUIT OR CEILING MOUNTED

COPPER

CURRENT TRANSFORMER

DIAMETER

DISCONNECT

ELECTRIC WATER COOLER

ELECTRICAL CONTRACTOR

ELECTRICAL METALLIC TUBING

EMERGENCY POWER OFF

EXISTING ELECTRICAL EQUIPMENT/WORK TO REMAIN

FIRE ALARM

FIRE ALARM CONTROL PANEL

FULL LOAD AMPS

FUSE

GROUND

GROUND FAULT CIRCUIT INTERRUPTER

HAND-OFF-AUTO

HORSEPOWER

ISOLATED GROUND

INVERTER

KILOVOLT

KILOVOLT AMPERE

KILOWATT

KILOWATT HOUR

LIGHTING PANEL

MAIN CIRCUIT BREAKER

MAIN DISTRIBUTION PANEL

MAIN LUG ONLY

MAXIMUM

MINIMUM

NATIONAL ELECTRICAL CODE

NATIONAL ELECTRICAL MANUFACTURERS ASSOC.

NEUTRAL

NON-FUSIBLE

NORMALLY CLOSED

NORMALLY OPEN

NOT IN CONTRACT

PHASE

POLE

POLYVINYL CHLORIDE (PLASTIC)

POWER FACTOR

RELOCATED EXISTING ELECTRICAL EQUIPMENT

RECEPTACLE PANEL

REMOVE AND REINSTALL

RIGID METALLIC CONDUIT

TELEPHONE BACKBOARD

TRANSFORMER

TYPICAL

UNDERCOUNTER

UNDERWRITERS LABORATORIES

UNINTERRUPTIBLE POWER SUPPLY

UNIVERSAL SERIAL BUS

UNLESS OTHERWISE NOTED

VOLT

VOLT AMPERE

WATT

WEATHERPROOF

WIRE GUARD

CLASSROOM, MULTI-PURPOSE ROOM X X

CORRIDOR

RESTROOM

STORAGE ROOM

MECH/ELECTRICAL

EXTERIOR EGRESS/SECURITY

LIGHTING

MANUAL ON/AUTOMATIC OFF WITHIN 20 MIN OF OCCUPANTS LEAVING SPACE (VACANCY MODE).

CONTINUOUS DIMMING.

LOCAL CONTROL SWITCH WITH ON/OFF FUNCTION. AUTOMATIC ON TO FULL VIA OCCUPANCY

SENSOR. AUTOMATIC FULL OFF VIA OCCUPANCY SENSOR (VACANCY MODE) WITHIN 20 MIN OF

OCCUPANTS LEAVING SPACE.

LOCAL CONTROL SWITCH WITH ON/OFF FUNCTION. AUTOMATIC ON TO FULL VIA OCCUPANCY

SENSOR. AUTOMATIC FULL OFF VIA OCCUPANCY SENSOR (VACANCY MODE) WITHIN 20 MIN OF

OCCUPANTS LEAVING SPACE.

LOCAL CONTROL SWITCH WITH ON/OFF FUNCTION. AUTOMATIC ON TO FULL VIA OCCUPANCY

SENSOR. AUTOMATIC FULL OFF VIA OCCUPANCY SENSOR (VACANCY MODE) WITHIN 20 MIN OF

OCCUPANTS LEAVING SPACE.

LOCAL CONTROL SWITCH WITH ON/OFF FUNCTION.

MANUAL OVERRIDE SWITCH WITH ON/OFF AND DIM FUNCTION. AUTOMATIC ON TO FULL VIA

SCHEDULED TIME FUNCTION OR PHOTOCELL. AUTOMATIC LIGHT LEVEL REDUCTION TO 70% AFTER

X HOURS VIA SCHEDULED TIME FUNCTION. FULL SHUTOFF VIA SCHEDULED TIME FUNCTION OR

PHOTOSENSOR.

NOTES:

1. ALL OCCUPANCY SENSORS SHALL HAVE AN ADDITIONAL DRY CONTACT FOR TIE-IN TO HVAC EQUIPMENT CONTROLS.

DISTRIBUTED LIGHTING CONTROLS SYSTEM (DRIVERS, SWITCHES, OCCUPANCY SENSORS, ETC.) WILL NETWORK

BACK TO A SINGLE SYSTEM CONTROLLER. A NETWORK CONNECTION (VIA BACNET/IP, BACNET MS/TP, OR THROUGH

SCHOOL'S NETWORK) BETWEEN THE BMS FRONT-END AND THE LIGHTING CONTROLLER SHALL BE PROVIDED BY THE

TCC (IF DIRECT TO CONTROLLER).

2. PROVIDE PLUG LOAD POWER PACKS FOR CONTROLLED RECEPTACLES AND INTEGRATE FUNCTIONALITY WITH

OCCUPANCY SENSORS.

3. ALL EXTERIOR LIGHTING (NON-SITE POLES) SHALL BE CONTROLLED BY BMS SYSTEM.

TYPE

L10

L11

DESCRIPTION

2' X 4' RECESSED FLAT PANEL.

SAME AS "L1" WITH DIFFERENT LUMEN PACKAGE.

4" DIRECT-ONLY LINEAR PENDANT - 4' STRIP.

2' X 4' RECESSED TROFFER - HIGH ABUSE.

SURFACE-MOUNT DECORATIVE FIXTURE - 24" DIA. HEX.

4" RECESSED LINEAR - 4' SECTION.

SAME AS "L6" WITH DIFFERENT LUMEN PACKAGE.

4" ROUND RECESSED DOWNLIGHT.

4" SURFACE MOUNT DIRECT-ONLY LINEAR - 2' SECTION.

4" SURFACE MOUNT DIRECT-ONLY LINEAR.

4" ROUND RECESSED DOWNLIGHT - WET LISTED.

EXTERIOR WALL PACK.

EXIT SIGN.

MANUFACTURER

LITHONIA LIGHTING

KENALL

EUREKA LIGHTING

FINELITE

GOTHAM LIGHTING

LITHONIA LIGHTING

FINELITE

GOTHAM LIGHTING

LITHONIA LIGHTING

MODEL

SPX 2x4 4800LM 80CRI 35K LUGR MVOLT

SPX 2x4 4000LM 80CRI 35K LUGR MVOLT

CLX L48 4000LM SEF RDL MVOLT 35K 80CRI

HSEDI 24 45TD 27/65K8 ATW DV 2F 4H SYM

4820D 24 LED REG

HP4 R D XX V 835 F 277 SC OTI-1% FE

HP4 R D XX B 835 F 277 SC OTI-1% FE

EVO4 35/02 AR MD LSS

CLX L24 2000LM SEF RDL MVOLT GZ10 35K 80CRI

HP4 SM D XX H 835 F 277 SC OTI-1% FE

EVOSH4 35/10 DFF SMO MVOLT EZ1

WDGE1 LED P2 40K 80CRI VF MVOLT SRM DDBXD

LQM S W 3 R 120/277 EL N M6

LUMINAIRE SCHEDULE

WATTAGE

34 W

27 W

26 W

45 W

37 W

15 W

LUMENS

4800

4000

3000

932/FT

479/FT

250

1500

725/FT

1000

TBD

RED

VOLTAGE

MVOLT

277

MVOLT

277

MVOLT

277

CCT

35K

27-65K

35K

40K

35K

CRI

80+

REMARKS

COORDINATE CUSTOM FIXTURE SPECIFICATONS WITH MANUFACTURER.

PROVIDE WITH (2) ADDITIONAL DRIVERS FOR FUTURE MAINTENANCE.

WATTAGE SHOWN IS PER LINEAR FOOT. REFER TO LIGHTING PLANS FOR RUN LENGTHS.

REFER TO PLANS FOR MOUNTING STYLE, DIRECTIONAL ARROWS, AND NUMBER OF FACES.

ALTERNATE MANUFACTURER | MODEL #1

COLUMBIA - NBT-24-80-35-L048-ED1-U

COLUMBIA - NBT-24-80-35-L040-ED1-U

COLUMBIA - MPS4-35LW-CN-ED1-U

VISCOR - VRU2X4/LED835K055LUNV

LIGHTING ELEMENTS - ATMOS-H-DS-D-MD-35K

LITECONTROL - 4L-XX-D-4-REG-D900-D01-1C-UNV

PRESCOLITE - LTR-4RD-H-06L-DM1-35K8MD

COLUMBIA - MPS2-35MW-CN-ED1-U

LITECONTROL - 4L-S-D-XX-35K9-D720-D01-1C-UNV

PRESCOLITE - LTR-4RD-H-SL-DM1-35K8MD

BEACON - VPW-48L-15-4K8-4F-UNV

COMPASS - CAR

POWER SYMBOL LIST

SYMBOL

DESCRIPTION

CONDUIT DOWN

CONDUIT UP

CORD REEL

DISCONNECT SWITCH - NON-FUSED

DISCONNECT SWITCH - FUSED

DISCONNECT SWITCH - COMBINATION MOTOR STARTER

FLOOR BOX

ELECTRICAL PANEL

GROUNDING ROD

GROUND

GROUNDING BAR

JUNCTION BOX

METER

MOTOR - SINGLE PHASE

MOTOR - THREE PHASE

MOTOR RATED SWITCH

POKE-THRU

RECEPTACLE - DUPLEX TYPE

USB

RECEPTACLE - DUPLEX TYPE 6" ABOVE COUNTER

RECEPTACLE - DUPLEX/CONTROLLED LOAD TYPE

RECEPTACLE - DUPLEX/USB COMBINATION TYPE

RECEPTACLE - QUADRUPLEX TYPE

RECEPTACLE - SIMPLEX TYPE

RECEPTACLE - SPECIALTY TYPE

TRANSFORMER

VFD

VARIABLE FREQUENCY DRIVE

NOTES:

1. ALL DEVICE RATINGS/SIZES SHALL BE COORDINATED WITH PLANS AND

SCHEDULES.

FIRE ALARM SYMBOL LIST

SYMBOL

DESCRIPTION

AUDIBLE DEVICE - CEILING MOUNTED

AUDIBLE DEVICE - WALL MOUNTED

CARBON DIOXIDE ALARM

CARBON MONOXIDE ALARM

COMBINATION AUDIBLE/VISUAL DEVICE - CEILING MOUNTED

COMBINATION AUDIBLE/VISUAL DEVICE - WALL MOUNTED

COMBINATION CARBON MONOXIDE ALARM/SMOKE DETECTOR

EXISTING

NEW

COMBINATION FIRE/SMOKE DAMPER

(VERTICAL)

EXISTING

NEW

COMBINATION FIRE/SMOKE DAMPER

(HORIZONTAL)

DUCT MOUNTED SMOKE DETECTOR

FAA

FIRE ALARM ANNUNCIATOR PANEL

FACP

FIRE ALARM CONTROL PANEL

FIRE DEPARTMENT COMMUNICATION OUTLET

FLOW SWITCH

HEAT DETECTOR

I/O

INPUT/OUTPUT CONTROL MODULE

MAGNETIC DOOR HOLDER

MANUAL PULL STATION

SMOKE DETECTOR - WALL MOUNTED, CEILING MOUNTED

SMOKE DETECTOR WITH AUDIO

TAMPER SWITCH

VISUAL DEVICE - CEILING MOUNTED

VISUAL DEVICE - WALL MOUNTED

NOTES:

1. DRAWINGS INDICATE DESIGN INTENT ONLY, FINAL LOCATIONS AND DEVICE

SPECIFICATIONS SHALL BE PROVIDED BY FIRE ALARM MANUFACTURER. REFER

TO PROJECT SPECIFICATIONS FOR APPROVED MANUFACTURERS.

2. FIRE DETECTION AND SIGNALING DEVICES ARE SHOWN FOR COORDINATION

PURPOSES. FINAL SYSTEM DESIGN TO BE PERFORMED BY CONTRACTOR AND

SUPPLIER FOR OFFICIAL SUBMISSION. COORDINATE ALL DEVICE QUANTITIES

AND LOCATIONS WITH SUPPLIER PRIOR TO INSTALLATION. ELECTRICAL

CONTRACTOR SHALL PROVIDE ALL NECESSARY PATHWAYS, POWER SUPPLIES

AND DEVICES PER SUPPLIER CONTRACT DOCUMENTS.

DRAWING INDEX

SHEET

DESCRIPTION

E0.0

ED1.1

ED1.2

ED1.3

ED3.1

ED3.2

ED3.3

EDS1.0

ES1.0

EP1.1

EP1.1A

EP1.2

EP1.3

EP1.3A

EP3.1

EP3.1A

EP3.2

EP3.3

EP3.3A

EL1.1

EL1.1A

EL1.2

EL1.3

EL1.3A

E4.0

E5.0

E6.0

ELECTRICAL GENERAL INFORMATION

ELECTRICAL DEMOLITION PLAN - UNIT 100

ELECTRICAL DEMOLITION PLAN - UNIT 200

ELECTRICAL DEMOLITION PLAN - UNIT 300

ELECTRICAL DEMOLITION ROOF PLAN - UNIT 100

ELECTRICAL DEMOLITION ROOF PLAN - UNIT 200

ELECTRICAL DEMOLITION ROOF PLAN - UNIT 300

ELECTRICAL DEMOLITION SITE PLAN

ELECTRICAL SITE PLAN

ELECTRICAL POWER PLAN - UNIT 100

ELECTRICAL POWER PLAN - UNIT A100

ELECTRICAL POWER PLAN - UNIT 200

ELECTRICAL POWER PLAN - UNIT 300

ELECTRICAL POWER PLAN - UNIT A300

ELECTRICAL ROOF PLAN - UNIT 100

ELECTRICAL ROOF PLAN - UNIT A100

ELECTRICAL ROOF PLAN - UNIT 200

ELECTRICAL ROOF PLAN - UNIT 300

ELECTRICAL ROOF PLAN - UNIT A300

ELECTRICAL LIGHTING PLAN - UNIT 100

ELECTRICAL LIGHTING PLAN - UNIT A100

ELECTRICAL LIGHTING PLAN - UNIT 200

ELECTRICAL LIGHTING PLAN - UNIT 300

ELECTRICAL LIGHTING PLAN - UNIT A300

ENLARGED ELECTRICAL PLANS

ELECTRICAL DETAILS

ELECTRICAL SCHEDULES

DRAWING NOTATION

SYMBOL

DESCRIPTION

CONSTRUCTION KEYNOTE NUMBER 1

DEMOLITION KEYNOTE NUMBER 1

COPPER FEEDER SIZE TAG

(REFER TO FEEDER SCHEDULE)

ALUMINUM FEEDER SIZE TAG

(REFER TO FEEDER SCHEDULE)

EQUIPMENT

EQUIPMENT TAG

EXISTING DEVICES OR EQUIPMENT

NEW OR MODIFIED DEVICES OR EQUIPMENT

NEW OR MODIFIED UNDERGROUND WIRING

EXISTING SYSTEM COMPONENT TO BE REMOVED

POINT OF NEW CONNECTION.

LIGHTING FIXTURE TAG

LIGHTING FIXTURE TYPE

INV1

13'-0"

NORMAL CIRCUIT, EMERGENCY

LIGHTING INVERTER, OR

GENERATOR CIRCUIT (MAY NOT

APPEAR ON EVERY TAG)

FIXTURE MOUNTING HEIGHT (MAY

NOT APPEAR ON EVERY TAG)

LIGHTING CONTROL TAG

LIGHTING CONTROL

SPACE TYPE '1'

SCENE SCHEDULE ID 'A' (MAY

NOT APPEAR ON EVERY TAG)

DAYLIGHTING CONTROL ZONE '1'

(MAY NOT APPEAR ON EVERY

TAG)

NOTE: THE TAG DOES NOT REFLECT THE QUANTITY OF CONTROL DEVICES

REQUIRED IN AREA.

E100

E300

SECTION NUMBER 4

SHEET E300 ON WHICH

SECTION VIEW IS PLACED

SECTION NUMBER 4

SECTION

SCALE: 1/4" = 1' - 0"

SHEET E100 ON WHICH SECTION IS CUT

(ENLARGED PARTIAL PLAN SIMILAR)

APPLICABLE CODES

AND REGULATIONS

YEAR

CODE

2023

2013

2009

2019

MICHIGAN BUILDING CODE

MICHIGAN ENERGY CODE

MICHIGAN RESIDENTIAL CODE

MICHIGAN REHABILITATION CODE

MICHIGAN ELECTRICAL CODE RULES, PART 8

NATIONAL ELECTRICAL CODE (NFPA 70)

NFPA 20

NFPA 72

NFPA 101

NFPA 110

ICC A117.1 ACCESSIBLE AND USABLE BUILDINGS & FACILITIES

DETROIT ELEVATOR CODE

KALAMAZOO | CHELSEA | GRAND RAPIDS | ROYAL OAK

ISSUANCES

CONSTRUCTION DOCUMENTS

ADDENDUM No. 01

VE MARKUPS

DATE

11.06.2025

11.20.2025

12.22.2025

ALTERNATE MANUFACTURER | MODEL #2

DAY-BRITE - 2SBP3050L-4-UNV-DIM

DAY-BRITE - FSX440L835-UNV

PACO - PRGA-C8-C8-24-MTG-60-8-35-MV

BASO - HEX-DIR-PDT-COLOR-OP-35K-C80-UNV-010V-0300L-DM-2FT

LEDALITE - 3901L93540QSXX04DE1NNNW

LEDALITE - 3901L93522QSXX04DE1NNNW

LIGHTOLIER - 4RN / C4LETO03935NZ10U / C4RDLCC

ILP - VS2-2L-U-CCTS-FRL

LIGHTOLIER - 4RN / P4RSL10935WWHZ10U

GARDCO - GWS-A02-840-T4M-UNV-BZ

BARRON EXITRONIX - ILX-RG-AC-WH

TE OF M I CHI

SCOTT E.

TOWNSEND

ENGINEER

No.

6201050400

PROF ESSI ON A L E

11/06/2025

Strategic Energy Solutions®

4000 W. Eleven Mile Road Berkley, MI 48072

Phone 248.399.1900 Fax 248.399.1901

www.sesnet.com

SES Project # 23 0588 02

JOB NO. 2900.09.D

SHEET TITLE

ELECTRICAL GENERAL

INFORMATION

SHEET NO.

E0.0

C KINGSCOTT ASSOCIATES INC.

KALAMAZOO, MICHIGAN

l jh

UNIT 300

UNIT 200

STORAGE

Room

UNIT 300

UNIT 200

VUV-2

LIFE SKILLS

251

TEACHER STATION IN

SPEECH

250

SURFACE RACEWAY

(R)

ALL EQUIPMENT IN SPACE ARE FURNISHED BY

OWNER; COORDINATE POWER REQUIREMENTS

WITH CUTSHEETS PRIOR TO ROUGH-IN WORK

MOTOR SKILLS

254

TAMPER-RESISTANT

WIREMOLD ALONG WALL

(18" AFF); 5 OUTLETS MIN.

WASHER

& DRYER

253

F 120VAC FOR IN-

ISLAND GROMMET

REFRIGERATOR

U.C. OVEN &

MICROWAVE

DISHWASHER

REFLECT

252

(E)

GFI GFI

(E)

GFI

ALL NEW POWER SHALL MAKE USE OF

CIRCUITS IN AREA MADE AVAILABLE BY

DEMOLITION WORK.

NOTE: ALL DEVICES SHALL BE GFI-TYPE

(IF NOT PROTECTED AT BREAKER).

FUTURE POWER TO BE

ROUGHED-IN BEHIND PADS

POWER GENERAL NOTES

1. ALL RECEPTACLES ON EXTERIOR, IN KITCHEN, IN CONCESSION, IN LABORATORY, AND

WITHIN 6'-0" OF SINK OR OTHER WATER SUPPLY SHALL BE READILY ACCESSIBLE GFCI TYPE

RECEPTACLE.

2. REFER TO ARCHITECTURAL FLOOR PLANS AND ELEVATIONS TO VERIFY LOCATION OF

DEVICES.

3. ALL CONDUITS SERVING 120 VOLTS OR GREATER SHALL INCLUDE A GROUND WIRE.

4. ALL CONDUITS SHALL BE ROUTED CONCEALED UNLESS NOTED OTHERWISE.

5. ALL 120 VOLT CIRCUITS SHALL UTILIZE A SEPARATE NEUTRAL.

6. ALL NEW 15- AND 20-AMPERE, 125- AND 250-VOLT NONLOCKING-TYPE RECEPTACLES TO BE

LISTED TAMPER-RESISTANT TYPE THROUGHOUT THIS SCHOOL. EXCEPTIONS TO THIS

INCLUDE RECEPTACLES LOCATED MORE THAN 5.5 FEET ABOVE THE FLOOR AND SINGLE OR

DUPLEX RECEPTACLES FOR DEDICATED APPLIANCES THAT ARE NOT READILY ACCESSIBLE.

ANY EXISTING RECEPTACLES THAT ARE INCLUDED IN THE SCOPE OF RENOVATION WORK

SHALL BE UPDATED PER NEW RECEPTACLE NOTES ABOVE AS WELL.

POWER KEYNOTES

R1 REUSE EXISTING BRANCH CIRCUIT WIRING FROM REMOVED UNIT VENTILATOR TO

CONNECT TO NEW UNIT VENTILATOR. NOTE: NO MORE THAN ONE (1) NEW UNIT

VENTILATOR CAN BE ON A 15/20A CIRCUIT BREAKER IN EXISTING PANEL. ALL NEW UNIT

VENTILATORS SHALL BE ON DEDICATED CIRCUITS.

R2 CLASSROOM TEACHER LOCATION. PROVIDE 2-GANG BOX WITH 3/4" CONDUIT FOR POWER

TO CEILING SPACE. COORDINATE WITH TECHNOLOGY DRAWINGS.

R3 PROVIDE NEW 20' CONCRETE-ENCASED ELECTRODE (PER NEC 250.52.3) WITH 1-1/4"

CONDUIT AND 1#4 GROUND TO MAIN BUILDING GROUND SYSTEM. CONNECT TO NEW

BUILDING STEEL AND BACK TO MAIN DISTRIBUTION PANEL.

R4 LOCATION FOR CLASSROOM PROJECTOR. PROVIDE CEILING-MOUNTED DUPLEX

RECEPTACLE. COORDINATE WORK WITH TECHNOLOGY TRADES.

R5 COORDINATE ROUTING OF LOW-VOLTAGE CONDUITS WITH PIPING AND LIGHTING IN AREA;

ALL ROUTING SHALL BE TIGHT TO DECK.

R6 PROVIDE CEILING MOUNTED CORD REEL (MODEL NUMBER "BRYC25163C" BY HUBBEL OR

EQUAL.) CIRCUIT TO GFI BREAKER IN PANEL. REFER TO TECHNOLOGY DRAWINGS FOR

COORDINATION WITH CAMERA IN CEILING AREA.

R7 PROVIDE 3/4" CONDUIT STUBBED TO CEILING SPACE FOR ACCESS CONTROL AT HEADER OF

DOOR. COORDINATE MOUNTING AND CONNECTION REQUIREMENTS WITH TECHNOLOGY

DRAWINGS.

R8 PROVIDE (1) 208V/1P 60A DISCONNECT SWITCH AND POWER CONNECTION FOR KILN;

PROVIDE (1) DEDICATED DUPLEX RECEPTACLE FOR KILN VENT AND CONTROLLER.

COORDINATE AND VERIFY ELECTRICAL REQUIREMENTS OF KILN AND ASSOCIATED

EQUIPMENT WITH MANUFACTURER AND TRADES PRIOR TO INSTALLATION.

KALAMAZOO | CHELSEA | GRAND RAPIDS | ROYAL OAK

M/E B

E4.0

GYM

OFFICE

M/E A

ATS-EL

EL1

RPKA

VE SCOPE: REMOVE LIFE

SAFETY ATS & PANEL

STORAGE

REWIRE EXISTING POWER CONNECTIONS OF

WALK-IN COOLERS, FREEZERS, AND DEFROST

TIMERS TO BE ON NEW STAND-BY PANEL "SR1"

PE STORAGE

ENRICHMENT

213

(E)FACP

S (E)

CIRCUIT TO DEDICATED 20A BREAKER

ON (E)RPAA MADE AVAILABLE FROM IT

RACK CIRCUIT RELOCATION

NEW FIRE ALARM CONTROL PANEL WITH

VOICE SYSTEM; CROSS-TIE INTO (E)FACP

OFFICE

REWORK EXISTING SURFACE

RACEWAY SO ITS VERTICAL RUN

CAN ACCOMMODATE NEW DOOR

(R)

CONFERENCE

205

1-1/4" PATHWAY TO

WALL (FOR HDMI)

PROVIDE FLOORBOX IN

CONNECTRAC FLOORING;

LOCATE NEAR TABLE LEG

TECHNOLOGY CR

202

MEDIA CENTER

(E)RPAA

(E)RPIGA

SR1-12

(E)

SR1-14

(E)

REWIRE EXISTING POWER CONNECTION

FOR TECHNOLOGY RACK TO BE ON NEW

STAND-BY PANEL "SR1"

WORKROOM

COORDINATE EXACT INSTALLATION REQUIREMENTS (BACKBOX TYPE, CONDUIT,

CABLING, LOCATION, ETC.) FOR ALL TECHNOLOGY DEVICES PRIOR TO ROUGH-IN

WORK; REFER TO TECHNOLOGY DRAWINGS AND DETAILS BY OTHERS.

PAINT FLOOR HATCH AROUND ELECTRICAL EQUIPMENT TO INDICATE SERVICE

CLEARANCE. MATCH AND COORDINATE WITH ARCHITECTURAL COLOR PLANS.

KITCHEN

SERVERY

STUDENT DINING

MEN

WOMEN

OFFICE

206

OFFICE

207

TEACHER

PLANNING

205

WKRM

204

ISSUANCES

CONSTRUCTION DOCUMENTS

ADDENDUM No. 01

VE MARKUPS

DATE

11.06.2025

11.20.2025

12.22.2025

ELECTRICAL POWER PLAN - UNIT 200

SCALE: 1/8" = 1'-0"

STAFF DINING

212

UNIT 200

UNIT 100

STAFF T

OFFICE

211

OFFICE

209

4th GRADE MUSIC

208

OFFICE

210

VUV-2

UNIT 200

UNIT 100

TE OF M I CHI

SCOTT E.

TOWNSEND

ENGINEER

No.

6201050400

PROF ESSI ON A L E

11/06/2025

Strategic Energy Solutions®

4000 W. Eleven Mile Road Berkley, MI 48072

Phone 248.399.1900 Fax 248.399.1901

www.sesnet.com

SES Project # 23 0588 02

KEY PLAN

JOB NO. 2900.09.D

SHEET TITLE

ELECTRICAL POWER PLAN - UNIT

200

SHEET NO.

EP1.2

C KINGSCOTT ASSOCIATES INC.

KALAMAZOO, MICHIGAN

l jh

Room

BAND

UNIT 200

UNIT 100

UNIT 200

UNIT 100

113

112

114

REMOVE AND REINSTALL

EXISTING FIXTURES IN

NEW 2X2 CEILING GRID

(E)

UNIT

ELUN1I-T1100

A100

L1 S1

LPA1-9

8' - 0"

(E)

(R)

(E)

(R)

RESOURCE ROOM

102

L1 L1

EL1-1

101

(E)

(R)

EL1-1

(E)

(R)

(E)

(R)

TYP

(E)

103

CONNECT TO CORRIDOR

LIGHTING IN ADDITION

UNIT A100

UNIT 100

KALAMAZOO | CHELSEA | GRAND RAPIDS | ROYAL OAK

111

110

GIRLS

STAFF T

STUDENT SERVICES

115

WKRM

BOYS

VE SCOPCER: WHERE "L1" TAG IS USED, ACCOUNT FOR

EM BATT1E0R4 Y-POWERED FIXTURE FOR EMERGENCY

LIGHTING IN LIEU OF UL924 DEVICE.

HALF SHADED FIXTURE = BATTERY-POWERED LIGHT

105

LIGHTING GENERAL NOTES

1. REFER TO ARCHITECTURAL REFLECTED CEILING PLAN FOR EXACT LOCATION OF ALL

LIGHTING FIXTURES UNLESS OTHERWISE NOTED.

2. EXIT LIGHTS AND EMERGENCY BATTERY UNITS SHALL BE UNCONTROLLED AND TIED

AHEAD OF LOCAL AREA LIGHTING SWITCH, UNLESS CIRCUITED OTHERWISE.

3. WHERE MORE THAN ONE LIGHT SWITCH IS INDICATED TO BE INSTALLED AT THE SAME

LOCATION, THEY SHALL BE GROUPED UNDER ONE COMMON FACEPLATE.

4. ALL POWER PACKS TO BE LOCATED DIRECTLY ABOVE SWITCH.

5. LIGHT FIXTURES ARE LOOPED TOGETHER TO INDICATE CONTROL ZONE GROUPS.

CONNECTED FIXTURES ARE TO BE CONTROLLED TOGETHER. CIRCUITS MAY BE SHARED

AMONG SEPARATE CONTROL ZONE GROUPS. MULTIPLE ZONES ZONES MAY BE COMBINED

IN SOFTWARE TO FORM SCENES. SEE LIGHTING CONTROL MATRIX: SCENE SCHEDULE (IF

PROVIDED), AND PANEL SCHEDULES FOR ADDITIONAL INFORMATION.

6. ALL CONDUITS SHALL BE ROUTED CONCEALED UNLESS NOTED OTHERWISE.

LIGHTING KEYNOTES

L1 PROVIDE UL924 LISTED GENERATOR/EMERGENCY TRANSFER DEVICE FOR FIXTURE OR

CIRCUIT AS INDICATED.

L2 NEW LIGHT FIXTURE(S) SHALL BE CONNECTED TO EXISTING BRANCH CIRCUIT IN SPACE.

L3 REMOVE AND REINSTALL LIGHTING FIXTURE(S) IN AREA AS REQUIRED TO ACCOMMODATE

WORK BY OTHER TRADES.

L4 HATCHED HEX INDICATES ACOUSTIC-ONLY FIXTURE. FELT COLOR FINISH AS INDICATED ON

PLAN (Y = YELLOW, B = BLUE). COORDINATE INSTALLATION WITH INTERIORS DRAWINGS.

ALL EXTERIOR LIGHTING SHALL BE CONTROLLED BY BMS SYSTEM.

REFER TO LIGHTING CONTROL MATRIX (SHEET E0.0) FOR INTERIOR SPACES.

ISSUANCES

CONSTRUCTION DOCUMENTS

VE MARKUPS

DATE

11.06.2025

12.22.2025

109

108

107

106

ELECTRICAL LIGHTING PLAN - UNIT 100

SCALE: 1/8" = 1'-0"

TE OF M I CHI

SCOTT E.

TOWNSEND

ENGINEER

No.

6201050400

PROF ESSI ON A L E

11/06/2025

Strategic Energy Solutions®

4000 W. Eleven Mile Road Berkley, MI 48072

Phone 248.399.1900 Fax 248.399.1901

www.sesnet.com

SES Project # 23 0588 02

KEY PLAN

JOB NO. 2900.09.D

SHEET TITLE

ELECTRICAL LIGHTING PLAN -

UNIT 100

SHEET NO.

EL1.1

C KINGSCOTT ASSOCIATES INC.

KALAMAZOO, MICHIGAN

This page summarizes the opportunity, including an overview and a preview of the attached documents.

RFP - Heritage Addition - Electrical Re-Bid

Attachment Preview

Sign-up for a Free Trial, Government Bid Alerts

See Also