RFB-239-26 FSS - KHC Roof Repairs Ph II

***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. On this line, Bidders must enter $0.00 for Contract Amount in the e-procurement system. Actual Contract Amount must be entered on "Official Bid Document" and submitted as an attachment in the e-procurement system. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. ** Entire Official Bid Document and Bid Bond (if required) should be combined as one PDF and uploaded** 1.        Remove existing roofing and underlayment to MTL decking (roof C) or LWCF (roofs D-H) 2.        Roof C a.        Mechanically attach 2 layers of 2.2 Poly-iso Insulation b.        Mechanically attach 1 layer of coverboard. c.        Apply one layer of SBS-modified bitumen fiberglass mat base ply in cold asphaltic adhesive. d.        Install one ply of granule surfaced SBS modified bitumen cap ply in cold asphaltic adhesive. 3.        Roof D-H a.        Adhere vented base sheet b.        Apply one layer of SBS-modified bitumen fiberglass mat base ply in cold asphaltic adhesive. c.        Install one ply of granule surfaced SBS modified bitumen cap ply in cold asphaltic adhesive. 4.        Install new metal flashing around perimeter of flat roof area. 5.        Install new access ladders. Install new walk pads as indicated on drawings