Reynolds Museum - Concrete Floor in Storage Building

Agency: Government of Alberta
State: Alberta
Type of Government: State & Local
NAICS Category:
  • 236220 - Commercial and Institutional Building Construction
  • 238110 - Poured Concrete Foundation and Structure Contractors
  • 238990 - All Other Specialty Trade Contractors
Posted Date: May 6, 2026
Due Date: May 25, 2026
Solicitation No: AB-2026-03516
Original Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page

Description

Open & Competitive Opportunity • Request for Proposal
Open
Arts, Culture and Status of Women
Engineering and construction of a 60 x 180 ft (18.28 x 54.86M) concrete floor slab for an existing storage building with a concrete driveway approach pad outside of the existing front building overhead door 18 x 20 ft (5.48 x 6.1m)

•        Subgrade preparation requires all organic material to be removed from slab area.
•        Minimum of 6” (15.25 cm) of compacted ¾” (20mm) minus crushed stone aggregate subbase.
•        Contractor will be responsible for all sub-base grading and aggregate placement.
•        Layer of minimum 6 mil poly barrier over prepared compacted gravel base.
•        All poly seams and penetrations overlapped a minimum of 8” (20cm) with the joints sealed with Tuck Tape or comparable product.
•        A minimum of 6” (15.25 cm) concrete slab thickness.
•        Minimum 32 mPa concrete mix.
•        C-2 exposure class concrete, 5-8% air entrapment.
•        Fiber reinforcement added to concrete to control shrinkage.
•        Concrete mix of ¾” (20mm) aggregate size.
•        #4 rebar spaced at 16”-18” (40-45cm) on center spacing.
•        A minimum of 2” (5cm) of concrete coverage over top of rebar.
•        Power trowel finish on the main floor area with a light broom finish at man door entrances.
•        Control cuts in floor slab must be 1.5” – 2” (3.8-5 cm) deep.
•        As there is no electrical power close to the work site, the contractor will need to supply their own portable generator if required.
•        There are no lights inside of the structure, the contractor will need to supply their own lights if required.
•        Contractor is responsible for obtaining all necessary permits (if required).
•        Contractor’s preferred concrete supplier must be a Certified Production Facility through Concrete Alberta.
•        Engineering report for the floor must be provided.
APC Reference # AB-2026-03516
Category Services
Posting Date • Time May 4, 2026 • 3:30 pm (MT)
Closing Date • Time May 25, 2026 • 2:00:00 pm (MT)
Region(s) of Delivery Alberta, Wetaskiwin
Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.
View Sample Report Start Free Trial

See Also

Dingman Pit Gravel Crushing 2...

Basic Information APC Reference # AB-2026-05999 Internal Reference # 2026-GC02 Title Dingman Pit

Government of Alberta

Due by 9/17/2026

TND0024961 - Asphalt Concrete...

Basic Information APC Reference # AB-2026-05956 Internal Reference # TND0024961 Title TND0024961 -

Government of Alberta

Due by 10/06/2026

TND0024337 - Transverse Crack...

Basic Information APC Reference # AB-2026-05787 Internal Reference # TND0024337 Title TND0024337 -

Government of Alberta

Due by 9/15/2026

CON0025761 - HWY 575:02 REHAB...

Basic Information APC Reference # AB-2026-05769 Internal Reference # CON0025761 Title CON0025761 -

Government of Alberta

Due by 9/15/2026

* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.