REPAIR CRACKS AND SPALLS B43131

This project shall accomplish a design-build repair of B43131. Repair cracks and spalls on concrete

walls, beams, columns, roof, floor slab, and eaves. Install concrete jackets to repair columns

along gridlines.Repair to restore integrity of steel members that deteriorated due to corrosion, and replace steel members where material loss exceeds 10% of the original thickness. Apply Fiber Reinforced Polymer (FRP) to canopy beams. Demolish existing ceiling tiles and install new tiles. Remove and reinstall electrical and other fixtures to facilitate repair works as needed. Paint areas that are subjected

to repair work and restore original appearance. Demolish and dispose of waste material as

appropriate. Abate and dispose of Asbestos Containing Material (ACM) and Lead-Based Paint (LBP).

Work for the project is described in more detail in Section 8 of this Statement of Work (SOW).

Sustainable principles, to include life cycle cost- effective practices shall be integrated into

the design, development, and construction of the project(s) in accordance with the latest version

of UFC 1-200-02, High Performance and Sustainable Building Requirements.Construction activities may commence after the approval of the Environmental Protection Plan (EPP) and AF Form 103 (work clearance). The Contractor shall coordinate on-site safety requirements through the 718th Civil Engineer Squadron (718 CES).