Purchase and Start-Up of Jet Nozzles

June 9, 2026
INFORMAL WRITTEN QUOTE
IWQ 131560
Gwinnett County is soliciting competitive informal written Quotes from qualified suppliers for the
Purchase and Start-Up of Jet Nozzles for the Department of Water Resources.
Quotes should be typed or submitted in ink and returned to the Attention of Anna West, Purchasing
Associate II. Quotes should be received by 5:00 P.M. June 23, 2026, by email at
Anna.West@GwinnettCounty.com or sent to the Gwinnett County Financial Services - Purchasing
Division - 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia 30046.
Questions regarding quotes should be directed to Anna West, Purchasing Associate II at
Anna.West@GwinnettCounty.com or by calling 770-822-7862 by 5:00 P.M. June 16, 2026. Quotes
are legal and binding upon the vendor when submitted.
Successful contractors will be required to meet insurance requirements. The Insurance Company
should be authorized to do business in Georgia by the Georgia Insurance Department and must have
an A.M. Best rating of A-7 or higher.
Gwinnett County does not discriminate on the basis of disability in the admission or access to its
programs or activities. Any requests for reasonable accommodations required by individuals to fully
participate in any open meeting, program or activity of Gwinnett County Government should be
directed to the ADA Coordinator at the Gwinnett County Justice and Administration Center, 770-822-
8165.
The written quote documents supersede any verbal or written prior communications between the
parties.
Award will be made to the supplier submitting the lowest responsive and responsible quote.
Gwinnett County reserves the right to reject any or all quotes, to waive technicalities, and to make an
award deemed in its best interest. Quotes may be split or awarded in entirety. Gwinnett County
reserves the option to negotiate terms, conditions and pricing with the lowest responsive,
responsible vendor(s) at its discretion.
We look forward to your quote and appreciate your interest in Gwinnett County.
Anna West
Purchasing Associate II
The following pages should be returned with your quote: Quote Schedule, Page 2-3
References, Page 7
Contractor Affidavit and Agreement,
Page 13

IWQ 131560 Page 2
FAILURE TO RETURN THIS PAGE AS PART OF YOUR QUOTE DOCUMENT MAY RESULT IN REJECTION OF YOUR QUOTE.
QUOTE SCHEDULE
DELIVERY FOB DESTINATION FREIGHT PRE-PAID AND ALLOWED TO: Gwinnett County Dept. of Water Resources - Central Facility, 684 Winder Hwy, Lawrenceville 30045
Informal Written Quotations are being solicited from qualified suppliers for the following item. Informal Written Quotations may be returned by email at Anna.West@GwinnettCounty.com or
sent to the Gwinnett County Financial Services - Purchasing Division - 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia 30046. If you have any questions, please contact Anna West,
(770) 822-7862 or email.
ITEM
QTY UNIT DESCRIPTION MFG & NO. DELIVERY A.R.O. UNIT PRICE TOTAL PRICE
#
KEG Torpedo Nozzle, one inch, jetted to 65 gpm at
1 4 EA $ $
2,000 psi, per specifications or approved equivalent
Aqua Power 700 Nozzle, one inch, jetted to 65 gpm at
2 4 EA $ $
2,000 psi, per specifications or approved equivalent
Aqua Power 700 Nozzle, one inch, jetted to 80 gpm at
3 3 EA $ $
2,500 psi, per specifications or approved equivalent
Twister Nozzle, one inch, jetted to 65 gpm at 2,000 psi,
4 4 EA $ $
per specifications or approved equivalent
Twister Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
5 3 EA $ $
per specifications or approved equivalent
Twister Nozzle, 12 inch, jetted to 22 gpm at 2,000 psi,
6 4 EA $ $
per specifications or approved equivalent
Twister Nozzle, 34 inch, jetted to 45 gpm at 2,500 psi,
7 1 EA $ $
per specifications or approved equivalent
O.M.G. Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
8 3 EA $ $
per specifications or approved equivalent
O.M.G. Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
9 3 EA $ $
per specifications or approved equivalent
Onsite Training, per specifications or approved
10 8 HR $ $
equivalent
OVERALL TOTAL $
Note:
1. The unit price MUST include ALL charges, including but not limited to Delivery and Start-Up.
2. Delivery MUST be made between 8:00 A.M. and 2:00 P.M., Monday - Friday, excluding holidays.
3. The use of brand name is not for restrictive purposes or to limit competition, but to assist vendors in determining the standard of quality Gwinnett County is
seeking. It is understood that items matching or exceeding the quality level are also acceptable. Gwinnett County shall be the sole determinant of
acceptability of all approved equivalents. It is the vendor's responsibility to prove equivalent products match or exceed the quality level of the product(s)
specified. If product differs from description above, vendor must supply specifications/cut sheets for the product being quoted prior to award.
4. If you are quoting an equivalent to the specified items, please send specifications with your submittal.

IWQ 131560 Page 3
FAILURE TO RETURN THIS PAGE AS PART OF YOUR QUOTE DOCUMENT MAY RESULT IN REJECTION OF YOUR QUOTE.
QUOTE SCHEDULE
NOTE: Note: Effective, July 1, 2013 and in accordance with the Georgia Illegal Reform and Enforcement Act, an original signed, notarized and fully completed Contractor Affidavit and
Agreement should be included with your bid/proposal submittal, if the solicitation is for the physical performance of services for all labor or service contract(s) that exceed $2,499.99
(except for services performed by an individual who is licensed pursuant to Title 26, Title 43, or the State Bar of Georgia). Failure to provide the Contractor Affidavit and Agreement with your
informal quote submittal may result in the quote being deemed non-responsive and automatic rejection.
Certification of Non-Collusion in Quote Preparation
Signature Date
In compliance with the attached specifications and requirements in the Instructions to Vendors, the undersigned offers and agrees, within ninety (90) days of the date of quote opening,
to furnish any or all of the items upon which prices are quoted, at the price set opposite each item, delivered to the designated point(s) within the time specified in the fee schedule. By
submission of this quote, I understand that Gwinnett County uses Electronic Payments for remittance of goods and services. Vendors should select their preferred method of electronic
payment upon notice of award. For more information on electronic payments, please refer to the Electronic Payment information in the instructions to vendors.
Legal Business Name
Address
Does your company currently have a location within Gwinnett County? Yes No
Representative Signature Printed Name
Telephone Number Fax Number
Email Address
Contact Person (if someone other than the authorized representative listed above)
Telephone Number Fax Number
E-Mail Address

IWQ 131560 Page 4
SPECIFICATIONS
KEG Torpedo Nozzles or Approved Equivalent
Those nozzles designed for sewer cleaning applications should meet the following standards and applications:
* Nozzle must have 8 rear facing jet inserts for all around cleaning and no forward-facing jets.
* Torpedo nozzles or like kind should have inserts with angles of incidence of 12 degrees and 18 degrees, should be made
of 300 series hardened stainless steel,
* Torpedo nozzle should be designed to clean 6 -inch lines to 18-inch lines
* Should be suitable for removal of sand, mud, sludge, brick, or other debris found in sewer or storm drain
lines,
* Threaded hose connections should be to NPT specifications
* Should be available with titanium ceramic inserts as an option
* Should be equipped with titanium ceramic insert option
* Should have available as an option verifiable patented fluid mechanics efficiencies that must meet ninety
percent plus (95%+) and be equivalent to KEG Torpedo US Patent # US 6.089.243,
* Titanium ceramic insert option should increase the manufacturer's warranty to three years on the nozzle
and five years on inserts.
* Units provided should be equivalent to those cleaning type nozzles manufactured by KEG gmbH, of
Burgstadt, Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of,
Spartanburg, South Carolina or approved equal.
Aqua Power 700 Nozzles or Approved Equivalent
* Controlled speed rotation/direction cleaning should be achieved by utilizing CENTRIFUGL CLUTCHES
* Body should be made of 300 series stainless steel
* The Head should have the following inserts
* Forward facing jet at an angle of 15-degree Jet oscillating by head rotating Used for opening blockages
* Inserts for cleaning Manholes in the front of nozzle head at 80 degrees 1 of these should be used in
cleaning and root cutting the other 2 jets should be plugged
* Nozzle should have 2 jets at 90 degrees for rotational cleaning
* Nozzle should have 2 jets at 100 degrees towards rear of nozzle for additional cleaning and cutting.
* Nozzle should have 4 inserts at the rear of the nozzle at 20 degrees for propulsion
* Nozzle should come 4 skids made of UHMW to make the nozzle slide smoother without scratching pipe
made of PVC and Lined Pipe.
* Should be available with titanium ceramic inserts as an option.
* Should be equipped with titanium ceramic insert option.
* Titanium ceramic insert option should increase the manufacturer's warranty to three years on the nozzle
and five years on inserts.
* Nozzle should be able to clean and cut in pipe size 6 inch to 15 inch in basic set up
* Nozzle should be able to be adjusted to 24-inch pipe with expansion kit sold separately that skids should
made of UHMW
* All rotating parts should have a (2) two years warranty, inserts should have a (5) five years warranty
* Nozzle should have a weight of 22.5 lbs
* Nozzle width should be 5 inches without skids
* Nozzle width with skids should be 7 inches
* Nozzle should come with serial numbers for ease of tracking in the case of theft or loss
* Rotor mechanism spinning around a main shaft, water driven, and should not require lubrication of any
type for operation.

IWQ 131560 Page 5
* Units provided should be equivalent to those rotor type nozzles manufactured by KEG gmbH, of Burgstadt,
Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of Spartanburg, South
Carolina, or approved equal.
Twister Nozzles or Approved Equivalent
* Nozzles Body should be made of 300 series Stainless Steel
* Nozzles should 4 inserts to the rear of nozzle for propulsion and removal of debris
* Nozzles should be able to be rebuilt in minutes with parts kit sold separately
* Nozzles should have 1 oscillating jet at 15 degrees
* Nozzles should be available with titanium ceramic inserts as an option
* Nozzles should be equipped with titanium insert option
* Titanium ceramic insert option should increase the manufacturer's warranty to three years on the nozzle
and five years on inserts.
* Units provided should be the equivalent of those manufactured by KEG gmbH, of Burgstadt, Saxony,
Federal Republic of Germany, and distributed by KEG Technologies, Inc., of Spartanburg, South Carolina, or
approved equal.
KEG O.M.G Nozzles or Approved Equivalent
* Should be made of 300 series hardened stainless steel with the nose of the nozzle being comprised of
aircraft grade aluminum
* Should have available verifiable patented fluid mechanics with efficiencies of 98%
* Should be available with titanium ceramic inserts as an option
* Should be equipped with titanium ceramic insert option
* Titanium ceramic insert option should increase the manufacturer's warranty to three years on the nozzle
and five years on inserts.
* Should have six rear facing jets at an angle of 8 degrees as well as an addition six rear facing jets at an
angle of 12 degrees with an optional forward-facing jet at 0 degrees.
* Should have dimensions of 18.25 inches x 4.25 inches and designed for such tasks as cleaning
deteriorated pipes and able to span existing holes in pipes of such condition
* Threaded hose connections should be to NPT specifications
* Units provided should be equivalent to those cleaning type nozzles manufactured by KEG gmbH, of
Burgstadt, Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of,
Spartanburg, South Carolina or approved equal.
Traction Nozzles or Approved Equivalent
* Should be made of 300 series hardened stainless steel
* Should be available with titanium ceramic inserts as an option
* Should be equipped with titanium ceramic insert option
* Titanium ceramic insert option should increase the manufacturer's warranty to three years on the nozzle
and five years on inserts.
* Should have six rear facing jets at alternating angles of 8 and 12 degrees with a forward-facing jet as an
option
* Should have available verifiable patented fluid mechanics with efficiencies of 80% or higher as a tier 3
nozzle
* Threaded hose connections should be to NPT specifications
* Should have a weight not to exceed 3.5 lbs

IWQ 131560 Page 6
* Units provided should be equivalent to those cleaning type nozzles manufactured by KEG gmbH, of
Burgstadt, Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of,
Spartanburg, South Carolina or approved equal.
Other Specifications
Should provide in-person onsite training in regard to sewer pipe cleaning best practices and techniques annually
when requested by Gwinnett County Department of Water Resources.
Such training should consist of a full 8 hours and cover the following:
* Classroom instruction covering the following topics: flow, pressures, jetting techniques, and safety.
* Demonstration of nozzles in controlled flow meter see through tube.
* In-field practical training in previous subject matter.

IWQ 131560 Page 7
FAILURE TO RETURN THIS PAGE AS PART OF YOUR QUOTE DOCUMENT MAY RESULT IN REJECTION OF QUOTE.
REFERENCES
Gwinnett County requests a minimum of three (3) references where work of a similar size and scope has been
completed.
Note: References should be customized for each project, rather than submitting the same set of references for every
project bid. The references listed should be of similar size and scope of the project being bid on. Do not submit a
project list in lieu of this form.
1. Company Name
Brief Description of Project
Completion Date
Contract Amount $ Start Dates
Contact Person Telephone
E-Mail Address
2. Company Name
Brief Description of Project
Completion Date
Contract Amount $ Start Date
Contact Person Telephone
E-Mail Address
3. Company Name
Brief Description of Project
Completion Date
Contract Amount $ Start Date
Contact Person Telephone
E-Mail Address
Company Name

IWQ 131560 Page 8
GWINNETT COUNTY
FINANCIAL SERVICES RISK MANAGEMENT
VENDOR INSURANCE REQUIREMENTS
Insurance:
Contractor shall provide evidence of insurance for at least the coverage and amounts set forth below. All insurance shall
be maintained in the form and with a company (or companies) satisfactory to the Gwinnett County Board of
Commissioners. The Contractor and their Subcontractor's/vendor's Certificates of Insurance shall require that the County
be notified in writing thirty (30) days prior to cancellation, modification, or non-renewal of any insurance policy listed on
the certificate(s). Upon request, the County will be provided certified copies of all required insurance policies.
A. Minimum Coverage
Commercial General Liability (Occurrence Form):
General Aggregate (other than Prod/Comp Ops Liability) $2,000,000
Products/Completed Operations Aggregate $2,000,000
Personal & Advertising Injury Liability $1,000,000
Each Occurrence $1,000,000
* Gwinnett County Board of Commissioners to be named as Additional Insured
* Additional Insured Endorsement CG 20 10 (edition dates of 07/04, 04/13, 12/19 or a substitute
endorsement providing equivalent coverage) and CG 2037 (edition dates of 07/04, 04/13, 12/19 or a
substitute endorsement providing equivalent coverage) must be provided with your Certificate of
Insurance.
* Primary and Non-Contributory Endorsement to be specified in writing
* Contractual Liability
* Broad Form Property Damage
* Severability of Interest
* Underground, explosion, and collapse coverage
* Personal Injury (deleting both contractual and employee exclusions)
* Incidental Medical Malpractice
* Hostile Fire Pollution Wording
* Include Waiver of Subrogation in favor of Gwinnett County Board of Commissioners
* If project or operations are within 50 ft of a railroad, Contractor is required to name the specific Railroad
as an Additional Insured and provide a copy of the Additional Insured Endorsement CG2417 or its
equivalent.
* In the event the General Liability insurance required by this Contract is written on a claims-made basis,
Contractor warrants that any retroactive date under the policy shall precede the effective date of this
Contract; and that either continuous coverage will be maintained, or an extended discovery period will be
exercised for a period of five (5) years or applicable statute of limitation period following completion of
the work.
Automobile Liability to include:
Combined Single Limit - Each Accident $1,000,000
* Comprehensive form providing coverage for bodily injury, death of any person, and property damage
arising out of the ownership, maintenance, and use of all owned, non-owned, leased, hired, borrowed
vehicles, and any other statutorily required automobile coverage.

IWQ 131560 Page 9
* Gwinnett County Board of Commissioners to be named as Additional Insured
* Additional Insured Endorsements must be provided with the Certificate of Insurance
* Coverage to include loading and unloading
* Contractual Liability
Worker's Compensation & Employer's Liability Coverage to include:
Workers Compensation Georgia State Statutory Limits
Employers Liability
Bodily Injury by Accident - Each Accident $ 500,000
Bodily Injury by Disease - Policy Limit $ 500,000
Bodily Injury by Disease - Each Employee $ 500,000
* Waiver of Subrogation in favor of Gwinnett County Board of Commissioners
Umbrella/Excess Liability Insurance with policy limits as determined by Contract Sums (higher limits may be
required depending on the extent of contract):
Contract Sums:
Contracts up to $999,999
Each Occurrence and Aggregate Limit $1,000,000
Contracts from $1,000,000 to $1,999,999
Each Occurrence and Aggregate Limit $3,000,000
Contracts from $2,000,000 to $4,999,999
Each Occurrence and Aggregate Limit $5,000,000
Contracts Over $5,000,000
Each Occurrence and Aggregate Limit $10,000,000
* Concurrency of Effective Dates with Primary
* Blanket Contractual Liability
* Drop Down Feature
* Umbrella Policy must be as broad as the primary policy.
* Coverage excess over General Liability, Business Auto Liability, and Employers Liability
* In the event the Umbrella/Excess Liability insurance required by this Contract is written on a claims-
made basis, Contractor warrants that any retroactive date under the policy shall precede the effective
date of this Contract; and that either continuous coverage will be maintained or an extended discovery
period will be exercised for a period of five (5) years or applicable statute of limitation period following
completion of the work.
* Evidence of coverage in the form of a Certificate of Insurance shall be provided to the County prior to
start of work.
* Gwinnett County Board of Commissioners shall be Additional Insureds.
* Contractor shall be liable for money, securities, or other property of the County.
* Such coverage shall include an owner coverage endorsement for County and County shall be included
as a loss payee.
* Additional Insured Endorsements must be provided with the Certificate of Insurance

IWQ 131560 Page 10
Cyber Liability Insurance: Applies if scope of work includes the storage or transfer of any County data or sensitive
data (including but not limited to personally identifiable, health, or payment card data) or the related hosting of
database(s) or internet site(s):
Limit of Insurance per Claim $1,000,000
Aggregate Limit $1,000,000
The Contractor shall maintain insurance coverage for network security and privacy risks, including, but
not limited to, insurance for data breach or introduction of virus or malicious codes, consumer
notification, whether or not required by law, forensic investigation, public relations and crisis management
and credit or identity monitoring or similar remediation services, unauthorized access, failure of security
information theft, damage to destruction of or alteration of electronic information, breach of privacy
perils, wrongful disclosure and release of private information, collection, or other negligence in the
handling of confidential information, and including coverage for related regulatory fines, defenses, and
penalties allowed by law.
Property Insurance:
The Contractor is fully and solely responsible for any physical loss or damage to all tools, equipment,
construction office trailers and their contents, vehicles or any other personal property utilized in the
performance of the Contractor's work. Contractor agrees to waive its rights of recovery and cause its
insurers, if any, to waive their rights of subrogation against Owner and Company for any such damage or
loss, however caused.
Riggers Liability Insurance:
If any work to be performed involves the rigging, lifting. lowering or moving of property or equipment, then
those parties performing such work shall carry Rigger's Liability Insurance in an amount adequate to
insure against the physical loss or damage to the property or equipment in its care
Aviation Insurance: Applies if scope of work requires the use of aircraft, including helicopters, unmanned aircraft
systems (e.g., drones) and/or fixed-wing aircraft:
Maintain (or require aircraft owner or operator to maintain), and Contractor shall furnish proof of, Aircraft
Liability insurance with minimum limits of $10,000,000 per occurrence for bodily injury and property
damage of all aircraft.
Unmanned aircraft systems, minimum limits of $2,000,000 for bodily injury, property damage, and
personal injury (including invasion of privacy) for unmanned aircraft systems, and guest voluntary
settlement bodily injury coverage (for any aircraft except unmanned aircraft systems)
* Such policy shall include contractual liability covering all owned and non-owned aircraft
* If the party providing the Aircraft Liability insurance is not Contractor, then Contractor shall require
such party to (a) waive any subrogation rights of recovery they and/or their insurance carriers may
have against County and any other indemnified parties and (b) name County and such other parties
as Additional Insureds
* The Contractor shall (or shall require aircraft owner or operator) to hire, employ, and utilize pilots
certified by the Federal Aviation Administration to operate any such aircraft.
B. Gwinnett County Board of Commissioners (and any applicable Authority) must be specified in writing as an
Additional Insured on General Liability, Auto Liability and Umbrella Liability policies.
C. Gwinnett County should be provided with a minimum of 30 days advance written notice of cancellation,
material change, or non-renewal of policies required by the contract.
D. Certificate Holder should read:
Gwinnett County Board of Commissioners
75 Langley Drive
Lawrenceville, GA 30046-6935