PURCHASE AND INSTALL OF MULTIPLE COMPONENTS ON A 2024 RAM 3500

This requirement is for to perform necessary parts install on a , 2024 RAM 3500 (Tag number G63B2240, VIN#3C7WRTCL0RG345239). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM).

BOM:

60inch CA

Front Winch, Mount, Guard, Lights

WARN Winch and Mount

-Warn16.5 Winch- WARN PN# WARN 68801

- Winch Mounting Bracket -WARN PN# 108001

-Winch Carrier- WARN PN# 107651

-Winch Guard- WARN PN# 109580

Light Bar

LED 2 row light bar

-Approximately 20 inches

-Wired to upfitter switches

LED Amber Strobe

-Mounted in front grill and rear of utility bed

-Wired to upfitter switch

Go light

-Mounted on driver side on material rack

-Two remotes

-LED lights

Body mounted work lights

-LED light

-Mounted at rear of utility bed

Utility Body

Body- CM brand TM body or equal

- Spring mounted front mount

-1st Front vertical compartment

- 2each 8-inch-tall heavy duty slide out drawers

-mounted at bottom of bin

-3/16th floor deck

-Compartment lights in each bin -Utility Box compartment lighting

-In floor Tiedown

-E-track

-Bed liner

-Additional storage boxes on top side of PS and CS of First vertical bin.

- Full Length First vertical bin

- Full width First vertical bin

- Box must not cover headache rack brake lights

- Doors must open up for access.

- Must be equipped with struts to hold open door

- Heavy Duty Spare Tire Rack and Cab protector screen

-Rack must be removable to facilitate vehicle cab removal.

Hitch and Bumper

-Class 5 receiver hitch

Rated at no less the 18,000lbs

-Recessed bumper

-Trailer Electrical plug wired to SAE J2863 standard

-Centrally located and protected rear view camera mount