Portable X-Ray Fluorescence Spectrometer

Brunker S1 Titan 800 or Approved Equal but MUST meet the state approved US EPA sampling method US EPA SW846 method 6200 and provide performance documentation with your online bid response indicating that it meets US EPA standards. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly, and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation. PREFERRED DELIVERY BY OR BEFORE MARCH 1, 2025 Specifications to Include: - Graphene window - Touch-screen color display - 50kV X-ray tube - Smart Grade timing - Two (2) Desktop Stand kits - Sharp Beam technology - Tough seal to protect from humid and dust - Two (2) lithium-ion batteries - Instrument charger - Detector Shield - Calibration check or standardization material - Spare windows - User manual with parts price list - Sturdy carrying case - National Institute of Standards and Technology (NIST) standard reference materials - Should display accurate analysis of targeted samples - Must be factory calibrated to ensure simplicity of operation - Quantify in parts per million, at a minimum, the following RCRA chemical elements; arsenic, barium, cadmium, chromium, lead, mercury, selenium, silver; as well as antimony, manganese, iron, nickel, copper, zinc, strontium, cobalt and titanium. Standard Factory Warranty TRAINING: Onsite vender demo and training. Vendor Onsite Training/Travel/Lodging Expenses to be included in Bid Offer. Four (4) employees will be trained on the Spectrometers. Training will be held at 150 Sower Blvd, Frankfort, KY DELIVERY/TRAINING TO BE INCLUDED IN BID OFFER Delivery will be to 1332 South Hwy 15, Hazard, KY The vendor must ensure that it reads in Parts Per million and displays concentrations according to US EPA SW846 method 6200. If it fails to meet the required standards, then it will be sent back at vendors expense. Testing will be based on the NIST with existing standards available.