Pop-up Target System

The Contractor shall provide all hardware, software, ancillary equipment, frames, and training necessary to deliver nineteen (19) new pop-up targets, a dependable long-range wireless communications network, and a comprehensive remote-control system. Furthermore, the Contractor shall provide upgrade options to integrate and ensure compatibility with existing, on-hand ATA pop-up targets and chassis.

• Quantity: The Contractor shall deliver nineteen (19) new pop-up targets with all associated hardware.


• Form Factor: The new pop-up targets must closely mirror the existing ATA "PIT" target design, form factor, and size to ensure seamless fitment into current protected target berms.


• Power Supply: All target components must be exclusively battery-powered.

The Contractor shall provide control devices and software capable of operating the entire target system.

• Hardware Devices:
  
  
  
  • Two (2) control tablets/pads designated for operator use at the range tower.
  
  
  • Three (3) hand-held controllers designated for maintenance personnel.
  
  
  • All handheld and tablet control devices must be battery-powered.
  
  
  
  


• Software Capabilities: The control software installed on the tablets and hand-held devices must provide the following functionalities from the range tower:
  
  
  
  • Accurate scoring and reporting of target hits.
  
  
  • Control of background lighting effects.
  
  
  • Selection and triggering of simulated return gunfire indication modes.
  
  
  • Real-time reporting and monitoring of target battery power levels.
  
  
  
  


• Range and Reliability: The system shall utilize a dependable wireless long-range communications network (e.g., WIFI) establishing a minimum two (2) mile range between the range tower and the pop-up target placement areas. All targets must be fully functional and controllable at the target location areas.


• Power Supply: Communications relays and associated network components may be solar-powered or battery-powered.

The Contractor shall provide system upgrade options and required hardware/software to make existing, on-hand ATA pop-up targets and chassis fully compatible with the newly provided targets, communications network, and remote control software.

Operations & Maintenance: The selected Contractor shall provide comprehensive maintenance and operations training to designated Grand Bay Range personnel. Training will cover routine operations, system troubleshooting, battery/solar maintenance, and software utilization.