5717 - Padmount Distribution Switches

Agency:	City of Redding
State:	California
Type of Government:	State & Local
Posted Date:	Jul 9, 2026
Due Date:	Jul 30, 2026
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Open Date	Description	Close Date
July 08, 2026	5717 - Padmount Distribution Switches OPEN	July 30, 2026

Attachment Preview

July 8, 2026

NOTICE INVITING BIDS

TO FURNISH

PADMOUNT DISTRIBUTION SWITCHES

TO THE

CITY OF REDDING, CALIFORNIA

(Bid Number #5717)

In accordance with the provisions of the City of Redding Municipal Code, sealed bids must

be submitted to the City Clerk’s 3rd floor office of the City of Redding, located at City Hall,

777 Cypress Avenue, Redding, California 96001 prior to 3:00 P.M. PT, Thursday, July 30, 2026,

to furnish the City of Redding Padmount Distribution Switches per bid specifications and general

conditions.

BIDS RECEIVED AFTER THIS TIME AND DATE WILL NOT BE ACCEPTED OR CONSIDERED.

The said bids will be opened at 3:00 P.M. PT on Thursday, July 30, 2026, in the designated

City Hall Conference Room, as posted in the main lobby of the City Hall, located at 777 Cypress

Avenue, Redding, California.

All bids must be submitted on standard bid forms provided by the City of Redding. The

bidder shall provide the original (unbound) and one (1) complete copy of the bid proposal

submission. Fax or electronic submission of bid proposals will not be allowed. The City will

award any resulting contract in a manner consistent with the City purchasing ordinance.

The cut-off date and time for receiving questions regarding this bid is 5:00 P.M. PT, on

Thursday, July 16, 2026. All inquiries must be made in writing and may be submitted to the email

address shown below.

THE CITY OF REDDING

Purchasing Division

Jennifer Antunes

Jennifer Antunes, Buyer

jantunes@cityofredding.gov

NOTE

If a potential bidder received this solicitation document through some means other than from the

City of Redding (including from the City of Redding Internet web site), it is the responsibility of the

potential bidder to advise the assigned City of Redding Purchasing contact of its intention to submit

a bid so that any addenda or other correspondence related to this solicitation will be sent to the

potential bidder. When contacting the Purchasing Division, the bidder shall provide the solicitation

number located on the cover page of this document. Transmittal of this information must be in

writing, by U.S. Mail, or e-mail. Transmittal of this information via telephone is not acceptable.

Please submit bid on enclosed form only. Forward to:

City of Redding

City Clerk

777 Cypress Avenue

Redding, CA 96001-2718

Mailing envelope is to be clearly marked on the outside with the following notation:

“Bid on Schedule No. 5717; opening at

3:00 P.M. on Thursday, July 30, 2026.

Bids may not be considered unless:

• Your original bid submittal and the stated number of copies are received.

• Bid Proposal Form and PSIS completed.

• Original Bid Form is signed in ink.

• Signature is legible – No initials.

• Bid must be received by the date and time indicated on this form.

The City of Redding

Purchasing Division

SPECIFICATIONS

TO FURNISH

PADMOUNT DISTRIBUTION SWITCHES

Bid Number 5717

Prepared by:

REDDING ELECTRIC UTILITY

July 2026

ABBREVIATIONS

Whenever in these specifications the following abbreviations are used, the intent and meaning

shall be interpreted as follows:

AAMA

AASHTO

ACI

AFBMA

AGA

AGMA

AISC

AISI

AITC

AMCA

ANSI

APA

API

AREA

ASAE

ASCE

ASHRAE

ASME

ASTM

AWI

AWS

AWPA

AWPB

AWWA

Aluminum Association

Architectural Aluminum Manufacturers Association

American Association of State Highway and Transportation Officials

American Concrete Institute

Anti-Friction Bearing Manufacturers Association

American Gas Association

American Gear Manufacturers Association

American Institute of Steel Construction

American Iron and Steel Institute

American Institute of Timber Construction

Air Moving and Conditioning Association

American National Standards Institute

American Plywood Association

American Petroleum Institute

American Railway Engineering Association

American Society of Agricultural Engineers

American Society of Civil Engineers

American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.

American Society of Mechanical Engineers

American Society for Testing and Materials

Architectural Woodwork Institute

American Welding Society

American Wood Preservers Association

American Wood Preservers Bureau

American Water Works Association

BHMA

Builders Hardware Manufacturers Association

CBMA

CDA

CISPI

CMAA

CRSI

Certified Ballast Manufacturers Association

Copper Development Association

Cast Iron Soil Pipe Institute

Crane Manufacturers Association of America

Concrete Reinforcing Steel Institute

Fed.Spec. Federal Specifications

Hydraulic Institute

HMI

Hoist Manufacturers Institute

ICBO

IEEE

ICEA

International Conference of Building Officials

Institute of Electrical and Electronics Engineers, Inc.

Insulated Cable Engineers Association

ABBREVIATIONS

JIC

Joint Industry Conferences of Hydraulic Manufacturers

MMA

Monorail Manufacturers Association

NBHA

NEC

NEMA

NESC

NFPA

National Builders Hardware Association

National Electrical Code

National Electrical Manufacturers Association

National electric Safety Code

National Fire Protection Association

NLMA

NWMA

National Lumber Manufacturers Association

National Woodwork Manufacturers Association

OECI

OSHA

Overhead Electrical Crane Institute

Occupational Safety and Health Act (both Federal and State)

Product Standards Section - U.S. Department of Commerce

RLM

RMA

RLM Standards Institute, Inc.

Rubber Manufacturers Association

SAE

SDI

SSPC

Society of Automotive Engineers

Steel Door Institute

Steel Structures Painting Council

TEMA

TCA

Tubular Exchanger Manufacturers Association

Tile Council of America

UBC

Uniform Building Code

Underwriters Laboratories, Inc.

WWPA

Western Wood Products Association

Unless a particular issue is designated, all references to the above specifications, standards, or

methods shall, in each instance, be understood to refer to the issue in effect (including all

amendments) on the first published date of the Invitation to Bid/Quotation Request.

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.

View Sample Report Start Free Trial

5717 - Padmount Distribution Switches

Description

Attachment Preview

See Also