One (1) New Engine Driven Welder with Air Compressor & Separate Plasma Cutter

Agency:	City of Casper
State:	Wyoming
Type of Government:	State & Local
NAICS Category:	333912 - Air and Gas Compressor Manufacturing 423830 - Industrial Machinery and Equipment Merchant Wholesalers 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Posted Date:	Aug 10, 2026
Due Date:	Aug 24, 2026
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Description	Opening Date/Time	Closing Date/Time
One (1) New Engine Driven Welder with Air Compressor & Separate Plasma Cutter	August 10, 2026 8:00 AM	August 24, 2026 3:00 PM

Attachment Preview

CITY OF CASPER

FLEET MAINTENANCE DIVISION

CITY OF CASPER

August 10, 2026

FY27024

Notice is hereby given that the City of Casper, Wyoming will receive sealed bids at the Fleet Office,

Casper Service Center, 1800 E. “K” Street, Casper, Wyoming, until 3:00 p.m., August 24, 2026 for

the following:

One (1) New Engine Driven Welder with Air Compressor and separate Plasma Cutter to be used

by the Parks Division of the Parks, Recreation and Public Facilities Department; unit must have the

minimum specifications of:

General

Specifications:

It is the intent of these specifications to specify the minimum requirement for

the furnishing and delivery of One (1) new Engine Driven Welder with Air

Compressor and separate Plasma Cutter. The unit shall be new, with full factory

warranty. Unit shall be delivered complete and ready for service, as specified,

and shall be equipped with all of the manufacturer’s standard equipment, as

advertised, whether or not specifically mentioned in these specifications, in

addition to all other equipment and attachments specified herein.

ITEM

ENGINE:

COMPRESSER:

PROCESSES:

MINIMUM SPECIFICATIONS

BIDDER’S SPECIFICATIONS

Power:

________________________

Welder- 27 hp Gasoline, twin cylinder. ________________________

Cooling Method: air

________________________

Fuel Tank Capacity: 11 U.S. Gallon ________________________

minimum.

Industrial rotary-screw air compressor ________________________

30 cfm, 100% duty cycle, 80–160 psi ________________________

Stick (SMAW)

MIG (GMAW)*

Flux-cored (FCAW)*

DC TIG (GTAW)

Air carbon arc (CAC-A)

________________________

OUTPUT RANGE:

DC stick 20–265 A

MIG/flux-cored 14–30 V

DC TIG 20–265 A

________________________

AUXILIARY POWER:

11,000 watts peak

9,500 watts continuous

BATTERY CHARGE/CRANK

ASSIST:

Battery charge 12/24 V, 150 A

Crank assist 12/24 V, 300 A

________________________

PLASMA CUTTER:

ACCESSORIES:

-Air plasma cutting and gouging

________________________

-40 A at 140 VDC, 60% duty cycle ________________________

-27 A at 91 VDC, 35% duty cycle ________________________

-Cutting Capability Rated: 5/8 in. ________________________

-20 ft. hand-held torch

________________________

-Case to provides protection during ________________________

transport and storage

________________________

-Consumables 2 electrodes, 2 tips (40 ________________________

A), one tip (30 A), drag shield (30 A),

deflector and air fitting

automatically connects to 120–240 V

100 ft electrode lead with stinger

100 ft work lead with ground clamp

Sunshade/Screen cover

________________________

NOTE: These forms may be duplicated.

Exceptions to any of the provisions of these specifications may be waived provided they are clearly

stated in the bid, and if in the opinion of the City of Casper, the bid complied with the intent of the

specification.

Should funding be inadequate to cover the items bid, all bids may be rejected or quantities adjusted

to fit budget amount.

All contacts should be made through Dan Coryell, Casper Service Center, 1800 East “K” Street,

Casper, Wyoming, 82601. Phone 307-235-8410.

PROPOSAL FOR FURNISHING

ENGINE DRIVEN WELDER WITH AIR COMPRESSOR AND SEPARATE PLASMA

CUTTER

FOR THE

PUBLIC SERVICES DEPARTMENT PARKS DIVISION

Proposal of (Name)

to furnish equipment as specified to the City of Casper, Wyoming, in accordance with specifications

dated August 10, 2026.

BID ITEM:

I. Price bid for Engine Driven Welder with Air Compressor

and separate Plasma Cutter specified

II. Trade-in allowance for Unit #83206

III. NET COST TO THE CITY:

(Total Price)

IV. Delivery: F.O.B. manufacturer of the City of Casper's choice within ____calendar days after

award of contract by City Council.

V. Trade in unit will be considered optional if, in the opinion of the City of Casper authorized

staff, it is found to be in the best interest of the City of Casper to do so.

In addition to this proposal, the undersigned herewith submits complete information,

including specifications and descriptive literature to fully describe and illustrate the equipment and

accessories offered. Incomplete bid specification will be considered non-compliant and rejected.

Bidder proposes to deliver equipment in accordance with the schedule above and agrees that

liquidated damages will be charged to him in accordance with specifications if delivery is not made

in accordance with said schedule.

A bid bond, certified check, or cashier's check made payable to the City of Casper,

Wyoming, in an amount of five percent (5%) of the total amount of this bid is enclosed as per

requirements of section II. The undersigned certifies that he understands the specifications relating

to said bid security and agrees to the conditions set forth in said specifications.

Submitted By:

Title:

Date:

Signature:

Phone:

EMAIL:_________________________________________________________________________

CITY OF CASPER, WYOMING

SPECIFICATIONS FOR

ENGINE DRIVEN WELDER WITH AIR COMPRESSOR AND SEPARATE

PLASMA CUTTER

(Approved by the City Attorney, 2026)

Dated the 24th Day of July, 2026

I. GENERAL:

The following specifications, including exhibits, attached hereto, shall constitute the minimum

acceptable specifications for the goods and/or services for which bids are requested. Bidders shall

include all items standard to article bid, whether or not specifically mentioned in these

specifications.

All goods shall be new and the latest current production models meeting the terms of the

specifications.

No bids may be withdrawn within thirty (30) days after the scheduled closing time for receipt of

bids without the consent of the City of Casper, Wyoming.

II. BID GUARANTY:

The City of Casper is required by Wyoming Statutes, 15-1-113, to receive a certified check,

cashier's check, bank draft upon a reputable bank, or a bid bond in the amount of five percent (5%)

of the total bid shall be provided for each bid submitted. If the bid is for more than one hundred and

fifty thousand dollars ($150,000), only a bid bond with sufficient surety in the amount of five

percent (5%) of the total bid amount will be accepted to consider any bid. Bid with deposit shall be

filed with the FLEET MAINTENANCE DIVISION, Casper Service Center, 1800 E. “K” Street,

Casper, WY 82601, securely sealed, and endorsed upon the outside of the wrapper, with a brief

statement as to the nature for which the bid is provided. Upon bid award, such surety shall be

returned to the unsuccessful bidder(s). In the case of the successful bidder, five percent (5%) surety

will be retained by the City until a proper bond or other proper bid guarantee to secure performance

has been filed and approved if required by the specifications of the bid.

III. SCHEDULE FOR DELIVERY AND LIQUIDATED DAMAGES:

Unless a schedule has been specified in the bidding documents, each bidder shall specify, in its

proposal, the time required for delivery of his goods to the place designated.

The provisions of Section II BID GUARANTY, shall apply to all bids, contracts and delivery times

as specified. Failure to enter into a contract for said bid with the city within 30 days of the award or

failure to proceed and/or deliver upon said bid or contract will result in forfeiture of bid guarantee.

IV. PLACE OF DELIVERY:

The successful bidder shall deliver the goods to the City of Casper, Casper Service Center, 1800

East "K" Street, Casper, Wyoming, unless otherwise specified.

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.

View Sample Report Start Free Trial

* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.