Junction Boxes-FHWA Eligible-REBID

***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. *See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf . *Please enter contact person, phone number and email in the Comments Section. *Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. __________________________________________________________________________________________________________ Junction box shall have an inside dimension of 20-inch-long x 13-inch-wide x 12-inch depth (tolerance of +- 1 inch), shall meet, or exceed ANSI/SCTE 77-2017 Specification (ANSI TIER 15), and have a non-slip ANSI TIER 15 surface cover. The cover shall have depth of 1 ¾ inch (Minimum) and it shall have pull slots for ease of removal. Cover shall be attached to pull box with two heavy duty (2) stainless steel hex auger bolts with 3/8 inch diameter (minimum) and a flat washer. Pull box cover shall be embossed with the legend "Traffic". Pull box shall be furnished with open bottom and two mouse holes for conduit and cable entry. Packaging: The cover (bolts and washers) shall be installed on the junction box. KYTC Warehouse (T-06-0100) FOR INTERNAL USE ONLY