26IT0530-Install Electrical Circuits in MCV Building

MCV Building A.C. Specs
The scope of work is to install the following circuits to be fed from the existing indoor power panel.
1.    (1) 50a240vac circuit in conduct to driver's side wall to be mounted mid-ship for shore power connection.
2.    (6) 20a120vac convenience receptacles, single duplex, to be installed on driver's side wall with 2 per section of the building framing.
3.    6) 20a120vac convenience receptacles, single duplex, to be installed on passenger side wall with 2 per section of the building framing.
4.    (2) 20a120vac convenience receptacles, single duplex, to be installed on the rear interior wall.
5.    (1) 30a240vac circuit to be mounted on the driver's side of the roll-up door and stored in a conduit box for future air compressor.
6.    (1) 50a240vac circuit in conduit to exterior wall near electrical for shore power connection.
Branch breakers to be provided by contractor
Local disconnect devices to be supplied by contractor and installed where required
All circuits to be installed in continuous EMT conduit

***NOTE: A site visit is required for this bid quote***
Please contact Jeff Green if you have any questions 205-415-7288