Invitation to bid Furnace Replacement - Plumb

Remove existing furnace located in the basement of the residence. Install a minimum 80%

efficient gas fire furnace with correct amp fuse and shut off switch located in an accessible

location. The switch and fuse box must be installed in an accessible location. The furnace

must be the required BTU for the square footage of the home. A filter slot and a cover for a

replacement air filter rack with a cover must be installed upon completion. Inspect the gas

pipe and in line shut off valve is in proper working order, any excessive rusting on the piping

those sections shall be replaced. The flue will need to be properly vented into the chimney.

All duct work in the basement must be sealed with duct tape or duct paste. New programable

thermoset shall be installed in location of existing thermostat. Mechanical permit required

before work begins.