INL Kyiv M4 Weapons Spares

Active

Contract Opportunity

Sources Sought Notice: 191NLE26I0024 - INL Kyiv Weapon Spare Parts

(PSC: H110; NAICS: 811490)

Background:

INL Kyiv Programs assist with weapon spare parts. The requirement is to provide direct support to previously purchased weapons and preserve USG investments. Law Enforcement partners have requested INL assistance with the procurement of equipment that will be used to maintain M4 and 308 weapon platforms throughout Ukraine.

This Sources Sought notice is issued for planning market research purposes only, and does not constitute a solicitation for proposals, offers, bids, and/or quotes. This is not an announcement of a forthcoming solicitation, or confirmation that the Government will contract for the items contained in the Sources Sought, nor is any commitment on the part of the Government to award a contract implied. Responses to this notice will assist the Government in identifying potential sources and in determining if a Small Business set-aside of the solicitation is appropriate, as well as determining if delivery of the demolition equipment can be delivered within 180-days of a potential award. Respondents are advised that the Government will not pay for any information or administrative cost incurred in response to this Sources Sought. Responses to this notice will not be returned.

The following information is requested in this RFI/Sources Sought:

1. Company name, point of contact, phone number, and address;

2. UEI Number and CAGE Code;

3. Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor];

4. SDVOSB/HUBZONE/8(a)/WOSB or other SBA certification for applicable NAICS;

5. Statement of capabilities applicable to this requirement;

6. MUST SPECIFY DELIVERY TIME. If unable to deliver within 180-days, please specify reasonable delivery times

Interested contractors may provide the above information via e-mail to the addresses listed below. Information submitted must be in sufficient detail as to allow for a thorough government review of the firm's interest and capabilities.

This information is due no later than Monday March 30, 2026, at 5:00 PM EST.

Primary Point of Contact:

Michele Coccovizzo

Senior Contract Support Specialist

CoccovizzoML@state.gov

Secondary Point of Contact:

Jamillah Timmons

Contracting Officer

TimmonsJ@state.gov

Technical Specifications:

SEE ATTACHED ANNEX 1 FOR FULL TECHNICAL SPECIFICATIONS AND QUANTITIES

New product only. The offeror is responsible for obtaining all weapon spare parts requested directly from the manufacturer, with no aftermarket parts/non-manufacturer parts incorporated in the weapon spare parts offered, 100% manufacturer assembly of all parts/components/equipment). The offeror is fully responsible for the delivery of safe, fully operational and complete weapons systems and accessories.

• The offeror shall provide a full one-year manufacturer warranty.

• Spare parts shall be manufactured to/comply with US Military specifications, manufacturer must conform to requirements of ISO 9001:2008 (design and manufacture of rifles and machineguns), and manufacturer will supply certification of testing to MILSPEC and applicable ISO 9001:2008 or more recent (i.e. 9001:2015) certification.

Delivery (Shipping and Handling Instructions):

The vendor is responsible for the preparation of delivery of all items listed above. Vendor will coordinate with COR for delivery/collection at vendor location. Delivery shall be made FOB Origin as soon as possible but not later than one hundred and eighty (180) days from the date of contract award and in accordance with the instructions from the COR, post award. FOB Origin shall be coordinated via INL freight forwarder (DFS). All Delivery will be coordinated with INL COR and provide requested information.

Partial shipments of complete items are authorized and in coordination with the Contracting Officer or the Contracting Officer’s Representative (COR).

The Contractor shall properly pack and consolidate the entire shipment to prevent damage, loss and/or misdirection. Upon notification, the contractor shall replace any items lost or damaged during shipment. Partial shipments are not allowed unless approved in writing by the Contracting Officer. The items acquired through this contract will be donated to the government of Ukraine. In addition to ensuring that all items are prepared for safe shipment, the contractor shall include all the necessary export approvals, required material data safety sheets, licenses, and paperwork. One copy of the packing list and commercial invoice must accompany the shipment, attached to the outside of the “lead” or number one box/carton/package, or individually attached to the outside of each box/carton/package. The packing list shall include, at a minimum: description, brand name, serial number (if any), and quantities.

Warranty:

To facilitate expeditious return of warranty items and to avoid delays in the warranty process, the offeror shall provide within 30 days of notification of a warranty action the required information to facilitate shipping of warranty items to manufacturer. This includes, but is not limited to, information to ensure full compliance with ITAR regulations and no delay in providing the Reference RA# and a shipping address.

Customs Clearance and Tax Exemptions:

If applicable, the U.S. Government will assist the Contractor in obtaining customs clearance in Colombia and tax exemption certificates from the Government of Ukraine in accordance with the packing, marking, and submission of documents as instructed herein.

Export License:

The Contractor shall comply with Sections 38-40 of the Arms Export Control Act (AECA) (22 U.S.C. 2778-2780) and the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) as required, for the prosecution of work under this contract at no additional cost to the Government. Failure to be in compliance with AECA and ITAR by date planned for commencement of contract performance as well as during the entire performance of work under this contract may result in contract termination. Any penalties rendered to the Contractor, as a direct result of being found non-compliance with AECA and ITAR will be the responsibility of the Contractor. The contractor is responsible for producing all required paperwork and obtaining all required Export Licenses. For additional information on AECA and ITAR, see http://www.pmddtc.state.gov/.

Attachments/Links