Industry Day Event for Special Ammunition and Weapons Systems and Non-NATO Commercial Ammunition
| Agency: | DEPT OF DEFENSE |
|---|---|
| State: | Federal |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Posted Date: | Mar 27, 2026 |
| Due Date: | Mar 13, 2026 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
- Contract Opportunity Type: Special Notice (Updated)
- Updated Published Date: Mar 27, 2026 03:46 pm EDT
- Original Published Date: Feb 19, 2026 12:27 pm EST
- Updated Response Date: Mar 13, 2026 05:00 pm EDT
- Original Response Date: Mar 13, 2026 05:00 pm EDT
- Inactive Policy: 15 days after response date
- Updated Inactive Date: Mar 28, 2026
- Original Inactive Date: Mar 28, 2026
-
Initiative:
- None
- Original Set Aside:
- Product Service Code: 1395 - MISCELLANEOUS AMMUNITION
-
NAICS Code:
- 332993 - Ammunition (except Small Arms) Manufacturing
-
Place of Performance:
N/AAX1
Update:
General Session slides from SAWS Industry Day on March 24, 2026 is included as attachment herein.
Any Questions or Feedback regarding the Industry Day and Draft SAWS RFP is requested by April 7, 2026 using the following form:
https://forms.osi.apps.mil/r/pyTLHnsisF
Purpose:
Army Contracting Command – Rock Island (ACC-RI) and U.S. Army, Product Lead Special Ammunition and Weapon Systems (PdL SAWS) will host an Industry Engagement Event on March 24-25, 2026. This event will cover a range of topics concerning the potential acquisition strategy for Special Ammunition and Weapons Systems (SAWS), including contract structure, proposal submission, and proposal evaluation methods. A detailed agenda and additional content will be provided closer to the event date.
The event will be held in person at the Hilton Garden Inn Rockaway, 375 Mt Hope Ave, Rockaway, NJ 07866 and will include both a general session and 1-on-1 vendor breakout sessions. To accommodate a wider range of industry partners, this event will proactively limit attendance to three (3) participants from each company for all sessions, to include the General Session and 1-on-1s. The USG reserves the right to further limit each company’s participant count, should capacity become an issue prior to the registration closing date.
The General Session for all registered attendees will take place on the March 24, 2026, at 08:00 EST. Following this, the 1-on-1 sessions will be scheduled and commence accordingly.
The purpose of these 1-on-1 sessions is to advance the SAWS pre-award effort by obtaining industry feedback to shape the Army’s evaluation methodology. All information provided by industry to the U.S. Government (USG) during these sessions will remain proprietary.
Industry Day questions can be submitted in advance or using the live QR Code during the Q&A session on the day of the event. Questions and responses will be posted or addressed with other companies present, in an open forum during the general Questions & Answers (Q&A) session.
Please submit industry day questions using the following link:
https://forms.osi.apps.mil/r/SDuCUM1Qk4
Please review the following policies and procedures for the 1-on-1 sessions:
-
Session Focus: This time is for addressing the Industry feedback on Self-Scoring Matrix, Ammunition Categories List, and Evaluation requirements, not for capability statements or company briefings.
-
Time Management: Sessions will be strictly timed to ensure fairness and adherence to the schedule. Timers will be used.
-
Non-Binding Nature: These discussions are for market research only. Nothing stated by either party will be considered binding. Information discussed will not be applicable to any future proposal or evaluation.
-
Participant Recording & Notes: Industry participants are prohibited from bringing personal recording devices. You may, however, take written notes as you see fit.
While the primary purpose of these sessions is for the USG to listen, please be aware that if the USG answers any questions, both the questions and the official answers will be provided publicly after the event, with the company's name being kept anonymous.
ACC-RI will provide official confirmation via email after the registration period closes.
All information discussed at Industry Day will be Unclassified.
Registration Instructions:
Respondents should submit their registration using the following link:
https://forms.osi.apps.mil/r/pLydzQVqh3
All registrations must be submitted no later than March 13, 2026 at 5:00PM EST. All costs associated with this Sources Sought/Notice and the upcoming Industry Event are the sole responsibility of the attendee/vendor. The requested information and any questions should be sent via e-mail to Logan E. Frye, Contract Specialist, ACC-RI, email logan.e.frye.civ@army.mil, and Lana Graw, Contracting Officer, ACC-RI email lana.r.graw.civ@army.mil.
- ACC ROCK ISLAND BLDG 60 3055 RODMAN AVE
- ROCK ISLAND , IL 61299-0000
- USA
- Logan Frye
- logan.e.frye.civ@army.mil
- Lana Graw
- lana.r.graw.civ@army.mil
- Phone Number (520) 693-0286
- Mar 27, 2026 03:46 pm EDTSpecial Notice (Updated)
- Feb 19, 2026 12:27 pm EST Special Notice (Original)
- May 18, 2025 12:00 am EDT Sources Sought (Original)
See Also
Follow 1377-01-520-9738 JM60 CKU-5C/A Catapult Rocket Motor Active Contract Opportunity Notice ID N0010426RK080
DEPT OF DEFENSE
Due by 10/21/2026
Follow MIL-DTL-46604C, Thruster, Cartridge Actuated, M13 Assembly Active Contract Opportunity Notice ID N0002426SN-68
DEPT OF DEFENSE
Due by 10/30/2026
Follow 13--RING,CLAMPING Active Contract Opportunity Notice ID N0010425QNC18 Related Notice Department/Ind. Agency DEPT
DEPT OF DEFENSE
Due by 10/22/2026
Follow 1377-01-520-9738 JM60 CKU-5C/A Catapult Rocket Motor Active Contract Opportunity Notice ID N0010426RK080
DEPT OF DEFENSE
Due by 10/21/2026