102-inch Forklift Tines for Doosan D120S-7

MINIMUM REQUIREMENTS

To be in conformance to the solicitation, all items below must be met.

This requirement is for two (2) sets of (2) 102-inch tines for Doosan D120S-7 Forklifts.

The forklift tines MUST:

1. Be a direct match to or, directly compatible with the Doosan D120S-7

Serial Number: FDC09-2300-00335

Mast Number: SWL23550LBS

1. Be mounted to a round shaft bar, with a lower hook, and positioners.


2. Be manufactured out of steel


3. Have a weight limit equal to or exceeding 20,000 pounds.


4. Have a thickness of 3.3 inches, a width of 7.87 inches and a length of 102 inches from the bottom of the 90 degree to the tip of the fork.


5. Have a fork carriage ISO class 5 with side shifting capabilities.


6. Tines must a complete unit, fork extensions will not be considered.

The Naval Supply Systems Command (NAVSUP) Fleet Logistics Center (FLC) Norfolk Contracting Department, Norfolk VA 23511-3392, intends to award a Firm-Fixed price contract in support of Explosive Ordnance Disposal Expeditionary Support Two. This acquisition will be conducted using the policies and procedures of FAR Part 12, Acquisition of Commercial Products and Commercial Services; and FAR Part 13, Simplified Acquisition Procedures. Please see attachements for further information. The associated NAICS code is 336999 with a small business size standard of 1,000 employees. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considedered by the agency.

This requirement was previously solicited under N0018925Q0090, that action has been cancelled and is re-solicited as this action.