Impact Resistant Urethane Resin - Black and Tan
| Agency: | DEPT OF DEFENSE |
|---|---|
| State: | Georgia |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Set Aside: | Total Small Business Set-Aside (FAR 19.5) |
| Posted Date: | Sep 3, 2025 |
| Due Date: | Sep 5, 2025 |
| Solicitation No: | W911S225U1877 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
Follow
Active
Contract Opportunity
Notice ID
W911S225U1877
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE ARMY
Major Command
AMC
Sub Command
ACC
Sub Command 2
MISSION INSTALLATION CONTRACTING COMMAND
Sub Command 3
419TH CSB
Office
W6QM MICC-FT DRUM
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
- Updated Published Date: Sep 03, 2025 03:47 pm EDT
- Original Published Date: Aug 29, 2025 02:13 pm EDT
- Updated Date Offers Due: Sep 05, 2025 02:05 pm EDT
- Original Date Offers Due: Sep 05, 2025 02:05 pm EDT
- Inactive Policy: Manual
- Updated Inactive Date: Sep 03, 2026
- Original Inactive Date: Aug 29, 2026
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 9330 - PLASTICS FABRICATED MATERIALS
-
NAICS Code:
- 325211 - Plastics Material and Resin Manufacturing
-
Place of Performance:
Training Support Center - Tamika Craig5251 Smiley Court, Bldg 3020Fort Benning, GA 31905 31905
Added three days because combined synopsis solicitation wasnt attached. 3 complete drum kits of 870 slow Black urethane casting resin and 1 complete drum kit of 870 slow Tan - These urethane kits are semi-rigid plastic with some flexibility that is strong and tough. Originally developed for high impact tooling, this product also offers abrasion and chemical resistance. It is ideal for a variety of industrial applications and fabrication of military training aids. Each of the three kits consists of two 55-gallon drums (Part A and Part B). The mixed resin is low in viscosity and does not require vacuum degassing. Technical Overview of the 3 870 slow black kits: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73�F / 23�C (ASTM D-2471); Handling Time: 4 hours @73�F / 23�C, depending on mass: Full Cure: 48 hours @ 73�F/23�C or 6 hours @150�F/60�C, depending on mass; Color: Black; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150�F / 60�C; Izod Impact Resistance (ft*lb/in): 16.1. Shipping with Lead Time of 30 days or less for the first 2 complete Black kits. The 1 remaining black kit shall be shipped 30 days after the first shipment of black kits. In addition to the Black kits, 1 complete kit of 870 slow Tan urethane casting resin 1 Tan kit consists of two 55-gallon drums (Part A and Part B). Technical Overview of the 1 kit of 870 slow Tan: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73�F / 23�C (ASTM D-2471); Handling Time: 4 hours @73�F / 23�C, depending on mass: Full Cure: 48 hours @ 73�F/23�C or 6 hours @150�F/60�C, depending on mass; Color: Tan; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150�F / 60�C; Izod Impact Resistance (ft*lb/in): 16.1. the 1 kit of Tan color shall be shipped in 30 days or less. All kits must be compatible with any brand of mold release. Material that does not cure properly must be replaced by the vendor at no cost to the government.
Attachments/Links
Contracting Office Address
- MICC FORT DRUM 4205 PO VALLEY RD
- FORT DRUM , NY 13602-5220
- USA
Primary Point of Contact
- Tamika Craig
- tamika.g.craig.civ@army.mil
- Phone Number 7065453313
Secondary Point of Contact
- Pierre Tippie
- charles.p.tippie.civ@army.mil
- Phone Number 706-545-6162
- Sep 03, 2025 03:47 pm EDTCombined Synopsis/Solicitation (Updated)
- Sep 03, 2025 02:22 pm EDT Combined Synopsis/Solicitation (Updated)
- Aug 29, 2025 02:13 pm EDT Combined Synopsis/Solicitation (Original)
Related Document
| Aug 29, 2025 | [Combined Synopsis/Solicitation (Original)] Impact Resistant Urethane Resin - Black and Tan |
Get Government Bids Like This by Email
Receive daily bid alerts that match your keywords, business categories, and target regions.
* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.