Haas UMC 750SS Vertical Machining Center

The United States Air Force located at Misawa Air Base intends to open negotiations in accordance with the attached sole source justification letter for a Haas Vertical Machining device. If interested vendors believe that they possess the certifications that are described in the sole source justification letter, those vendors are encouraged to submit evidence of such certifications to the Contracting Officer for consideration.

Below is a description of the requirement that will be solicited to the companies indicated in the sole source justification:

The Contractor shall deliver and install of one UMC-750SS 5-Axis Vertical Machining Center; 30" x 20" x 20" (762 x 508 x 508 mm) with integrated 2-axis trunnion rotary table for 35 MXS. The estimated delivery date will be 30 to 60 days after contract award.

Spindle Nose to Table (Min/Max) 4.0"-24.0"

B-Axis Tilt: +120/-35 degrees

C-Axis Rotation: 360 degrees

Platter Dia: 19.7"

Precision Rotary Scales

40 taper spindle - 30 hp (22.4 kW) vector drive, 12,000 rpm, 90 ft-lb @2000 rpm, inline direct-drive

Electronic Thermal Compensation to compensate for the expansion and contraction of each linear axis.

30+1 Side-Mount Tool Changer

1200 ipm rapids (X, Y, Z) - 650 ipm max cutting

Wireless Intuitive Probing System

Machine Weight 14,250 lb - Max Machine Footprint: 158.0"W x 124.1"D x 123.2"H - 55-gallon (208 liter) flood coolant system

Top Cover w/Mist Extraction Provision

Controller Features:

CNC Control Cabinet Cooler

Touch Screen Control

Media Display M-Code 130

Early Power Failure Detection Module

Ethernet Interface

Large Touch Screen Jog Remote

Rigid Tapping 1 GB Program Memory

Safe Run

Self-Diagnostics

USB Port

Memory Lock Keyswitch

Dynamic Work Offsets and Tool Center

Point Control

Second Home Position

Tool Life Management

Power Surge Protection

HIgh Speed Machining

Options:

Belt Chip Conveyor

Through-Spindle Coolant system that provides up to 300 psi (21 bar) of coolant to the cutting tool

Internal High-Voltage Isolated Transformer for 380-480V operation

Enclosure Exhaust System

Haas Through-Spindle Air Blast (TAB) option supplies high-pressure / high-flow air through the tool, directly to the cutting edge, to clear chips and provide cooling during dry machining

Auxiliary Coolant Filter

Machine Anchoring Kit; anchoring straps, hardware, tube brush, 5/8" hammer drill bit, and machine anchoring template

Chip Tray Filter Kit; supplemental chip strainer kit keeps chips from entering the

coolant system. Includes a 200-micron filter and metal chip tray basket

Open Market Haas Machine Tooling -HAAS CAT40 TSC PULL STUD - 10 PACK

96mm Riser (Multi-Mount)

45° Dovetail Cutter w/ Inserts, (1″ Shank Diameter)

PKG-D - 1x R96-V562X 1x R96-V75100X 1x R96-DM50 1x R96-DM25 1x R96-2DM12 1x R96-CERX-40 1x RL96-MP

Machine Start Up - On-Site Overseas Start Up for Large Frame Haas Machines: Includes mandatory actions to be conducted by a Certified Haas Technician. The following actions will be completed at the contract specificed location: Levelling, Start Up, and Operator Orientaiton. This does not include, training, rigging the machine into place, uncrating the machine and accessories or utility connections

IUID tag plate per MIL-STD-130x

Freight & Packing - Freight and additional packaging (crating, barrier bag, desiccant, etc.)