Gwinnett Drive Widening Project

The work to be performed by the General Contractor consist of but is not limited to the following major items:

• EROSION CONTROL BMP’s including mulch, tree save fence, temporary grassing, inlet sediment trap, silt fence, and sodding.
• TRAFFIC CONTROL during all stages, allowing traffic thru at all times.
• DEMOLITION including tree removal, clearing and grubbing.
• SITE WORK, EARTH WORK including grading and excavation.
• CONCRETE PAVING including remove and replace concrete curb & gutter, sidewalks, and driveways.
• STORM DRAIN STRUCTURES including storm sewer structures.
• STORM DRAIN PIPE including RCP (type 3), exacavation, bedding, compaction, and dewatering.
• PAVING, PAVEMENT STRIPING, SIGNAGE, TRAFFIC LOOPS.
• PEDESTRIAN LIGHT POLES; HANDRAILS; FIRE HYDRANT.
• Re-grout all exist. structures & site clearing.
• The equipment and materials to be furnished by the Contractor will be installed at the locations shown on the Drawings and as described in the respective section of these specifications.
• All work shall comply with all Federal, State, and local requirements and specifications.
• The latest GDOT Standard Specifications for Road and Bridge Construction of the Georgia Department of Transportation, shall govern the construction of this project.
• Work to be completed during night time. Operations to start 9 PM and finish by 5 AM during bussiness days.