6540--FY25: Anterior Chamber Intraocular Lenses New requirement
| Agency: | VETERANS AFFAIRS, DEPARTMENT OF |
|---|---|
| State: | Florida |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Posted Date: | Dec 20, 2024 |
| Due Date: | Dec 27, 2024 |
| Solicitation No: | 36C24825Q0226 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
Follow
Active
Contract Opportunity
Notice ID
36C24825Q0226
Related Notice
Department/Ind. Agency
VETERANS AFFAIRS, DEPARTMENT OF
Sub-tier
VETERANS AFFAIRS, DEPARTMENT OF
Office
248-NETWORK CONTRACT OFFICE 8 (36C248)
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Sources Sought (Original)
- Original Published Date: Dec 20, 2024 04:37 pm EST
- Original Response Date: Dec 27, 2024 03:00 pm EST
- Inactive Policy: Manual
- Original Inactive Date: Feb 25, 2025
-
Initiative:
- None
- Original Set Aside:
- Product Service Code: 6540 - OPHTHALMIC INSTRUMENTS, EQUIPMENT, AND SUPPLIES
-
NAICS Code:
- 339113 - Surgical Appliance and Supplies Manufacturing
-
Place of Performance:
C.W. Bill Young VA 10000 Bay Pines Blvd. Bay Pines , FL 33744USA
DESCRIPTION: Bay Pines Veterans Affairs has a requirement for anterior chamber intraocular lenses. Surgical service requires lenses in support of cataract procedures. Needed for patients when capsular or consular support is absent and can be placed if there is normal iris anatomy and a deep anterior chamber. The Surgical Service is located at C.W. Bill Young VA, 10000 Bay Pines Blvd., Bay Pines, FL 33744
INTRODUCTION AND SCOPE OF WORK:
Alcon Vision, LLC. is required to provide the MTA4U0 - (5.5 thru 30.0) sizes ofAnterior-Chamber PMMA Lens. Supplies must have the physical characteristics to enable the government to perform the capabilities.
Manufacturer: Alcon Vision, LLC
Part Number(s): MTA4U0
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-5.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-6.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-6.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-7.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-7.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-8.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-8.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-9.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-9.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-10.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-10.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-11.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-11.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-12.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-12.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-13.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-13.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-14.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-14.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-15.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-15.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-16.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-16.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-17.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-17.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-18.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-18.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-19.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-19.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-20.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-20.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-21.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-21.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-22.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-22.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-23.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-23.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-24.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-24.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-25.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-25.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-26.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-26.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-27.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-27.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-28.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-29.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-30.0)
PLACE OF DELIVERY AND PERFORMANCE: C.W. Bill Young VA, 10000 Bay Pines Blvd., Bay Pines, FL 33744
DELIVERY SCHEDULE: All items to be delivered within 30 days of purchase order processing and order placement. Free On-Board Destination (FOB) destination pricing.
THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES; however, any firm that believes it can meet the requirements may give written notification prior to the response due date and time. The proposed NAICS 339113 is applicable to this acquisition; with a size standard of 800 employees. Parties may identify their interest, accompanied by supporting literature to the Contract Specialist no later than 12/27/2024 at 3:00 PM EST. Responses should be sent to jose.hernandez@va.gov. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement will be solely up to the government.
INTRODUCTION AND SCOPE OF WORK:
Alcon Vision, LLC. is required to provide the MTA4U0 - (5.5 thru 30.0) sizes ofAnterior-Chamber PMMA Lens. Supplies must have the physical characteristics to enable the government to perform the capabilities.
Manufacturer: Alcon Vision, LLC
Part Number(s): MTA4U0
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-5.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-6.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-6.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-7.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-7.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-8.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-8.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-9.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-9.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-10.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-10.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-11.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-11.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-12.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-12.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-13.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-13.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-14.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-14.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-15.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-15.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-16.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-16.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-17.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-17.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-18.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-18.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-19.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-19.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-20.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-20.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-21.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-21.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-22.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-22.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-23.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-23.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-24.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-24.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-25.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-25.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-26.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-26.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-27.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-27.5)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-28.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-29.0)
QTY 4 - LENS,ANTERIOR-CHAMBER PMMA (P/N : MTA4U0-30.0)
PLACE OF DELIVERY AND PERFORMANCE: C.W. Bill Young VA, 10000 Bay Pines Blvd., Bay Pines, FL 33744
DELIVERY SCHEDULE: All items to be delivered within 30 days of purchase order processing and order placement. Free On-Board Destination (FOB) destination pricing.
THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES; however, any firm that believes it can meet the requirements may give written notification prior to the response due date and time. The proposed NAICS 339113 is applicable to this acquisition; with a size standard of 800 employees. Parties may identify their interest, accompanied by supporting literature to the Contract Specialist no later than 12/27/2024 at 3:00 PM EST. Responses should be sent to jose.hernandez@va.gov. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement will be solely up to the government.
Attachments/Links
Contracting Office Address
- 8875 HIDDEN RIVER PARKWAY
- TAMPA , FL 33637
- USA
Primary Point of Contact
- Jose J Hernandez
- jose.hernandez@va.gov
- Phone Number 352-381-5708
Secondary Point of Contact
- Dec 20, 2024 04:37 pm ESTSources Sought (Original)
Get Government Bids Like This by Email
Receive daily bid alerts that match your keywords, business categories, and target regions.
See Also
solicitation doc dept/buyer/category/solicitation type dates status REQ FOR PRE-QUAL OF VENDORS FOR ANIMAL
Palm Beach County
Due by 3/16/2027
Description Department / Buyer Solicitation Number / Type / Category Closing Date and
Palm Beach County
Due by 12/21/2028
Description: VARIOUS TYPES OF PRESS ROOM SUPPLIES, PRE-QUALIFICATION Department: Purchasing Buyer: Kerry Parker
Palm Beach County
Due by 11/01/2027
Description: VEHICLE DIAGNOSTIC TOOL AND INFORMATION SYSTEM, PURCHASE AND Department: Purchasing Buyer: Bridget
Palm Beach County
Due by 7/26/2028
* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.