FTCC - Tiny Town Renovations - Phase II

Agency:	State Government of North Carolina
State:	North Carolina
Type of Government:	State & Local
NAICS Category:	236220 - Commercial and Institutional Building Construction
Posted Date:	Feb 23, 2026
Due Date:	Mar 19, 2026
Solicitation No:	96-2605_CMT-2819
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Solicitation Number:	96-2605_CMT-2819
Project Title:	FTCC - Tiny Town Renovations - Phase II
Description:	Fayetteville Technical Community College is seeking a qualified Construction Material Testing (CMT) service to assist in the upfit of an existing 30,874 SF building shell (1st Floor: 23,420 sq. ft., 2nd Floor: 9,137 sq. ft.) for FTCC staff offices and maintenance shop facilities. CMT services would include but are not limited to testing and inspection of driveway, entranceway, parking lot to ensure compliance with code requirements and construction documents.
Opening Date:	3/19/2026 2:00 PM
Posted Date:	2/24/2026
Status:	Open
Department:	FAYETTEVILLE TECHNICAL COMMUNITY COLLEGE


Solicitation Number * 96-2605_CMT-2819	Department FAYETTEVILLE TECHNICAL COMMUNITY COLLEGE	Status Reason Open
Opening Date 2026-03-19T14:00:00.0000000	Posted Date * 2026-02-23T20:59:45.0000000Z	Primary Commodity Code Professional engineering services
Mandatory Conference/Site Visit — —	Special Instructions —	Solicitation Type * Select RFP IFB RFI
Owner Scott Meis
Description Fayetteville Technical Community College is seeking a qualified Construction Material Testing (CMT) service to assist in the upfit of an existing 30,874 SF building shell (1st Floor: 23,420 sq. ft., 2nd Floor: 9,137 sq. ft.) for FTCC staff offices and maintenance shop facilities. CMT services would include but are not limited to testing and inspection of driveway, entranceway, parking lot to ensure compliance with code requirements and construction documents.

Attachment Preview

Fayetteville Technical Community College

Engineering Services – Construction Material Testing (CMT)

Department/Agency

Project Title

CMT Services

Scope of Work

Contact

Telephone

Total Project Budget

Source of Funds

Approved OC-25 #

Publish Date

Closing Date

Submit a Letter of Interest

and SF-254 electronically:

NC Licensing Statement

Fayetteville Technical Community College

NCCCS # 2819 Tiny Town Renovation - Phase II

CMT for building renovation project

Fayetteville Technical Community College is seeking a qualified CMT service to

assist in the upfit of an existing 30,874 SF building shell (1st Floor: 23,420 sq. ft.,

2nd Floor: 9,137 sq. ft.) for FTCC staff offices and maintenance shop facilities.

CMT services would include but are not limited to testing and inspection of

driveway, entranceway, parking lot to ensure compliance with code requirements

and construction documents.

Rodney Rogers

(910) 678-8371

rogersw@faytechcc.edu

$7,5000,000

County & State

n/a

February 23, 2026

March 19, 2026, at 2:00 PM ET

All responses shall be submitted via the electronic Vendor Portal (eVP) at:

https://evp.nc.gov/ . Using Bid Number 96-2605_CMT-2819 under the Fayetteville

Technical Community College solicitations.

In order to offer architectural, engineering, or landscape architectural services in

response to this solicitation, the proposing firm must be properly licensed to practice

Architecture, Engineering, or Landscape Architecture in the State of North Carolina.

More information on the North Carolina state boards may be found at the following

websites:

NC Board of Architecture: (http://www.ncbarch.org)

NC Board of Examiners for Engineers & Surveyors: (http://www.ncbels.org)

NC Board of Landscape Architects: (http://www.ncbola.org)

STATE BUILDING COMMISSION - SELECTING CRITERIA

In selecting designers, the selection committee should take into consideration qualification information including such

factors as:

1. Specialized or appropriate expertise in the type of project.

2. Past performance on similar projects.

3. Adequate staff and proposed design or consultant team for the project.

4. Current workload and State projects awarded.

5. Proposed design approach for the project including design team and consultants.

6. Recent experience with project costs and schedules.

7. Construction administration capabilities.

8. Proximity to and familiarity with the area where the project is located.

9. Record of successfully completed projects without major legal or technical problems.

10. Other factors which may be appropriate for the project.

STATE BUILDING COMMISSION - SUBMITTAL CRITERIA

Proposing firms must submit a Letter of Interest and a current Standard Form 254 (SF 254) with the information package.

The current SF 254 template is located at http://ncadmin.nc.gov/businesses/construction/forms-documents which is the

State Building Commission approved form.

In the interest of cost-savings to the designers, consistency of the submittals and more efficient use of time by the pre-

selection committee, required information should be submitted electronically via the electronic Vendor Portal (eVP) using

the appropriate Bid Number under the Fayetteville Technical Community College solicitations. The format should be 8-1/2"

x 11" pages. The Letter of Interest should not exceed ten (10) single-sided pages or five (5) double-sided pages plus the SF

254.

Printed, e-mailed, and faxed submittals will not be accepted.

9-2605_CMT-2819 - Tiny Town Reno Phase II - CMT SolicitationTiny Town Renovation - Phase II

Page 1 of 1

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.

View Sample Report Start Free Trial

FTCC - Tiny Town Renovations - Phase II

Description

Attachment Preview

See Also