FILTER AIR CARTRIDGE

PRODUCT OVERVIEW
* MERV 11, 14, 15, 16 and
FP-R (98% DOP) - wet-laid
micro-fiberglass media
* MERV 11, 14, 15 - gradient
density synthetic media
* Available options are side
gasketing, metal double
header, and full metal wrap
* Max Temperature - 150 F
* Ideal for use in
- Commercial/Industrial FP and FP-S MINI-PLEAT
- Health Care/Government
Facilities
- Desert/Marine
Installations
- Schools/Universities WHY THE FP or FP-S MINI-PLEAT?
- Airports
* Design incorporates 193 square feet * Dual direction fiberglass media for front
- Turbine Applications
of high efficiency fiberglass media and or reverse mount installations
for synthetic media
150 square feet of synthetic media within
* Maximum flow rate of 750 fpm
a 24x24x12 frame increasing dust
* Sustainable component for a
holding capacity and filter life
LEED/Green Building initiative
* Low pressure drop results in significant
* Environmentally friendly
energy savings
- No metal corrosion
* Rigid construction allows it to withstand
- Fully incinerable
many unfavorable conditions especially
- Reduces landfill waste
variable air volume (VAV) systems and
100% relative humidity
* High impact plastic frame creates an
exceptionally strong lightweight filter
* Built-in handle* eases transportation
and installation
* p atent #6,955,696
Phone: +1 877.344.8326 * Fax: +1 800.518.1162 * www.filtrationgroup.com * aerostar@filtrationgroup.com

FP and FP-S MINI-PLEAT
FP PERFORMANCE DATA (24 x 24 x 12) FP-S PERFORMANCE DATA (24 x 24 x 12)
INITIAL RESISTANCE ("w.g.) INITIAL RESISTANCE ("w.g.)
FINAL FINAL
MEDIA MERV 375 fpm 500 fpm 625 fpm RESISTANCE ("w.g.) MEDIA MERV 375 fpm 500 fpm 625 fpm RESISTANCE ("w.g.)
11 0.11 0.18 0.26 2.0 11 0.13 0.20 0.28 2.0
14 0.20 0.28 0.37 2.0 Synthetic 14 0.14 0.22 0.31 2.0
Fiberglass 15 0.24 0.34 0.45 2.0 15 0.19 0.28 0.38 2.0
16 0.41 0.57 0.75 2.0
FP-R 0.56 0.77 1.00 2.0
FP - INITIAL RESISTANCE (24 x 24 x 12)
AIR FLOW RATE (fpm)
PRODUCT DATA
FP (FIBERGLASS MEDIA) - PART NUMBER NOMINAL ACTUAL
SIZE SIZE APPROX. WEIGHT MEDIA AREA
MERV 11 MERV 14 MERV 15 MERV 16 MERV 16 (FP-R) (H" x W" x D") (H" x W" x D") (LBS.) (SQ. FT.)
40016-P 40039-P 40069-P 40093-P 40117-P 12 x 24 x 12 11 3/ 8 x 23 3/ 8 x 11 12 5.7 97
40213-P 40156-P 40068-P 40345-P 40346-P 20 x 20 x 12 19 3/ 8 x 19 3/ 8 x 11 12 8.4 120
40010-P 40033-P 40058-P 40087-P 40111-P 20 x 24 x 12 19 3/ 8 x 23 3/ 8 x 11 12 9.4 162
40001-P 40023-P 40046-P 40077-P 40102-P 24 x 24 x 12 23 3/ 8 x 23 3/ 8 x 11 12 11.0 193
FP-S (SYNTHETIC MEDIA) - PART NUMBER NOMINAL ACTUAL
SIZE SIZE APPROX. WEIGHT MEDIA AREA
MERV 11 MERV 14 MERV 15 (H" x W" x D") (H" x W" x D") (LBS.) (SQ. FT.)
42500 42506 42209 12 x 24 x 12 11 3/ 8 x 23 3/8 x 11 12 5.0 63
- 761533-P 763186-P 20 x 20 x 12 19 3/ 8 x 19 3/8 x 11 12 7.0 87
42502 42508 42207 20 x 24 x 12 19 3/ 8 x 23 3/8 x 11 12 8.3 118
45203 42509 42205 24 x 24 x 12 23 3/ 8 x 23 3/8 x 11 12 10.0 150
ENGINEERING SPECIFICATIONS
1.0 General
1.1 Filters shall be Aerostar(R) FP and FP-S Mini-Pleat filters 2.5 Filter frames shall have preformed locations for both prefilter
as manufactured by Filtration Group. clips and final filter clips to be attached.
1.2 Filters shall be available in depths of 12" only. 2.6 Filter frames shall have preformed handles on the air leaving side
1.3 Underwriters Laboratories classified to UL 900. to aid in installation and to reduce the chances of media damage
1.4 Filters are manufactured by an ISO 9001 registered company. due to handling.
2.0 Filter Materials of Construction 3.0 Filter Performance
2.1 Media shall be wet-laid micro-fiberglass or gradient density 3.1 Filters shall be available as MERV 11, 14, 15, 16 or R for
synthetic media with hot melt or string separators to maintain fiberglass media and MERV 11, 14 or 15 for synthetic media as
pleat uniformity and spacing. desired by end user when tested in accordance with the
2.2 Frame shall be a high impact plastic with built in header on top and ASHRAE 52.2 Test Standard.
bottom. 3.2 F or initial resistance of filters, see Performance Data chart above.
2.3 Media shall be adhered and sealed to frame with polyurethane 3.3 F ilter shall be rated to withstand a continuous operating temperature up to
to prevent by-pass. 150 F.
2.4 Frame shall have slopes to allow for moisture and water drainage. 3.4 F ilters shall have a recommended final resistance of 2.0" w.g.
).g.w"(
ECNATSISER
0.75
0.70
FP-S - INITIAL RESISTANCE (24 x 24 x 12)
1.00
0.90 MERV 11
MERV 14 0.80 MERV 15
MERV 16 0.70 FP-R
0.60 0.50
0.40
0.30
0.20
0.10
0.00
0 125 250 375 500 625
AIR FLOW RATE (fpm)
).g.w"(
ECNATSISER
0.40
MERV 11
0.30 MERV 14
MERV 15 0.20
0.10
0.00
0 125 250 375 500 625
FP - MINIMUM REMOVAL EFFICIENCY (24 x 24 x 12)
PARTICLE SIZE (m)
)%( YCNEICIFFE
LAVOMER
FP-S - MINIMUM REMOVAL EFFICIENCY (24 x 24 x 12)
100
90
80 70
60
50 MERV 11
MERV 14 40 MERV 15 30 MERV 16 FP-R 20
10
0
0.01 1.0 10.0
PARTICLE SIZE (m)
)%( YCNEICIFFE
LAVOMER
AIR FLOW RATE (fpm)
100
90
80 70
60
50
40 MERV 11 30 MERV 14 20 MERV 15
10
0
0.01 1.0 10.0
).g.w"(
ECNATSISER
).g.w"(
ECNATSISER
AIR FLOW RATE (fpm)
)%(
YCNEICIFFE
LAVOMER
PARTICLE SIZE (m)
)%(
YCNEICIFFE
LAVOMER
AIR FLOW RATE (fpm)
PARTICLE SIZE (m)
Phone: +1 877.344.8326 * Fax: +1 800.518.1162 * www.filtrationgroup.com * aerostar@filtrationgroup.com
(C) FG 10/17
).g.w"(
ECNATSISER
0.75
0.70
1.00
0.90 MERV 11
MERV 14
0.80 MERV 15 MERV 16
FP-R 0.70
0.60
0.50
0.40
0.30
0.20 AIR FLOW RATE (fpm)
0.10
0.00
0 125 250 375 500 625
).g.w"(
ECNATSISER
0.40
MERV 11
0.30 MERV 14
MERV 15 0.20
0.10
0.00
0 125 250 375 500 625
PARTICLE SIZE (m)
)%(
YCNEICIFFE
LAVOMER
100
90
80
70
60
50 MERV 11
MERV 14 40 MERV 15 30 MERV 16 FP-R
20
10
0
0.01 1.0 10.0
PARTICLE SIZE (m)
)%(
YCNEICIFFE
LAVOMER
100
90
80
70
60
50
40 MERV 11 30 MERV 14 20 MERV 15
10
0
0.01 1.0 10.0