F-16 Aircraft or larger painter module
| Agency: | DEPT OF DEFENSE |
|---|---|
| State: | Texas |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Set Aside: | No Set aside used |
| Posted Date: | Jul 2, 2025 |
| Due Date: | Jul 22, 2025 |
| Solicitation No: | F16AircraftPaintingModule |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Sources Sought (Original)
- Original Published Date: Jul 02, 2025 09:26 am EDT
- Original Response Date: Jul 22, 2025 12:00 am EDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: Aug 06, 2025
-
Initiative:
- None
- Original Set Aside: No Set aside used
- Product Service Code: 1680 - MISCELLANEOUS AIRCRAFT ACCESSORIES AND COMPONENTS
-
NAICS Code:
- 336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing
-
Place of Performance:
JBSA Lackland , TX 78236USA
The requirements for the corrosion facility insert is as follows:
The insert must comply with all of the requirements of the Aircraft Hangar Paint requirements of the Unified Facilities Criteria 4-211-02 dated 1 December 2012. The hangar will not be used for aircraft washes or media blasting. The insert should be able to fit an F-16 Aircraft or larger. The facility requires an air shower for egress of the insert. The system should be able to maintain facility temperatures and humidity requirements in accordance with Technical Order 1-1-8 paragraph 5.5.4. The system will be located in the San Antonio Climate.
The Insert should fit within a hangar bay that is 73’ 11 5/8” wide, 73’ 4” deep and 140’ Tall (see attached diagram). The door is a 3 part sliding door that is 61’ 3” Wide.
The building has natural gas, electrical and water supplies available nearby.
The questions we have are as follows:
What is the largest aircraft that can be safely maintained in this area?
What are the expected power requirements for this facility?
- KO FOR TXANG DO NOT DELETE 1493 BILLY MITCHELL BLVD
- LACKLAND AFB , TX 78236-0123
- USA
- Capt Derek Guedes
- derek.guedes.3@us.af.mil
- Phone Number 2106120153
- Jul 02, 2025 09:26 am EDTSources Sought (Original)
See Also
Bid Information Type RFP-MA Status Issued Number 2410 (General Merchandise and Supermarket Stores)
Alief Independent School District
Due by 6/30/2029
Type RFP-MA Status Issued Number 2410 (General Merchandise and Supermarket Stores) Issue Date
Alief Independent School District
Due by 6/30/2029
General Merchandise and Supermarket Stores Solicitation ID: 2410 | Due Date: 4/30/2029 |
State Government of Texas
Due by 4/30/2029
Follow IFB 33-6038 HM Sales * Lead* Ft. Sam Houston, TX Active Contract
DEPT OF DEFENSE
Due by 10/19/2026