East Michigan Fog Sealing

91396-025.0-bid document (PDF, 2MB)

91396-025.0-Distribution List (PDF, 45KB)

91396-025.0-map (PDF, 2MB)

91396-025.0-special provisions (PDF, 144KB)

SCOPE OF WORK

The scope of work for this project shall consist of the following work along East Michigan Ave. from Riverview to Wallace:

1) Remove existing pavement markings per plan and as directed by the Engineer.

2) Place temporary lane markings, construction signage and traffic control for the appropriate phase of work.

3) For each phase of construction: prepare pavement for fog seal by cleaning/sweeping to ensure a dry and clean surface for fog seal application.

4) Fog seal the roadway for each phase of construction.

5) Place raised temporary pavement markings prior to allowing traffic on roadway.

6) Provide and place pavement markings consistent with existing roadway markings in type, color, width, pattern, and alignment, in accordance with applicable standards and specifications.

7) Place non-motorized delineators and buffers.

8) Remove traffic control and open roadway to traffic.

All necessary traffic control, labor, materials, tools, equipment, and other items incidental to the work being performed shall be included in the Contractor’s unit price for this contract. Such items will not be bid or paid for separately but shall be included in the overall unit price.

The bidder shall furnish all labor, supervision, supplies, tools, equipment, and other means necessary or proper for performing and completing the work. The bidder shall be responsible for the cleaning up of the job site and shall repair or restore all structures and property that may be damaged or disturbed during performance of the work to the satisfaction of the Public Services Department for the City of Kalamazoo. Drainage structure covers shall be salvaged and reused if in usable condition; otherwise, they shall be replaced. Where needed, all traffic control used for such operations as defined by the MMUTCD will be the responsibility of the bidder.

The bidder shall have all work completed by September 1, 2026.