DOUBLE WALL INSULATED DUCTING

Agency: DEPT OF DEFENSE
State: Oklahoma
Type of Government: Federal
FSC Category:
  • 45 - Plumbing, Heating, and Sanitation Equipment
NAICS Category:
  • 332322 - Sheet Metal Work Manufacturing
Set Aside: Total Small Business Set-Aside (FAR 19.5)
Posted Date: Sep 23, 2026
Due Date: Sep 24, 2026
Solicitation No: W911S226U4509
Original Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page

Description

Follow
DOUBLE WALL INSULATED DUCTING
Active
Contract Opportunity
Notice ID
W911S226U4509
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE ARMY
Major Command
AMC
Sub Command
ACC
Sub Command 2
MISSION INSTALLATION CONTRACTING COMMAND
Sub Command 3
419TH CSB
Office
W6QM MICC-FT DRUM
Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information View Changes
  • Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
  • Updated Published Date: Sep 23, 2026 06:13 am CDT
  • Original Published Date: Sep 21, 2026 02:25 pm CDT
  • Updated Date Offers Due: Sep 24, 2026 10:00 am CDT
  • Original Date Offers Due: Sep 29, 2026 10:00 am CDT
  • Inactive Policy: Manual
  • Updated Inactive Date: Sep 23, 2027
  • Original Inactive Date: Sep 21, 2027
  • Initiative:
    • None
Classification
  • Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
  • Product Service Code: 4520 - SPACE AND WATER HEATING EQUIPMENT
  • NAICS Code:
    • 332322 - Sheet Metal Work Manufacturing
  • Place of Performance:
    McAlester Army Ammunition Plant; 1 C-Tree Road, Building 6; McAlester, OK 74501 74501
Description
amended to reduce days due to cut off. Salient Characteristics for the Dual-Wall Insulated Aluminum Spiral Duct System: 1. Dual-Wall Spiral Pipe Part Code: 39230 Description: Straight dual-wall, insulated spiral duct pipe. Inside Diameter: 30 inches Outside Diameter: 34 inches Wall Thickness: 0.040 inches for both inner and outer walls. Material: Aluminum. Insulation: 2-inch thick fiberglass with a density of 1.5 lbs/cu. ft. Spacers: Internal I-beam spacers every 8 inches to maintain duct separation. Quantity: 140 feet 2. 90-Degree Elbow Part Code: 3923090 Description: 90-degree bend for the duct system. Construction: 5-piece gored elbow. Inside Diameter: 30 inches Outside Diameter: 34 inches Bend Radius: 45-inch centerline radius. Material: 0.040-inch aluminum. Insulation: 2-inch thick fiberglass with a density of 1.5 lbs/cu. ft. Quantity: 4 3. 45-Degree Elbow Part Code: 3923045 Description: 45-degree bend for the duct system. Construction: 3-piece gored elbow. Inside Diameter: 30 inches Outside Diameter: 34 inches Bend Radius: 45-inch centerline radius. Material: 0.040-inch aluminum. Insulation: 2-inch thick fiberglass with a density of 1.5 lbs/cu. ft. Quantity: 2 4. Reducing Lateral Cross Fitting Part Code: 3012523 Description: A cross-shaped fitting that reduces the main duct size and has two branches. Main Inlet/Outlet: Reduces from 30 inches to 28 inches. Branches: Two 12-inch diameter branches at a 45-degree angle. Material: 0.040-inch aluminum. Quantity: 1 5. Flange System for Main Pipe Part Code: 302406 Description: Connection system (AccuFlange) for joining the 30 x34 dual-wall pipe and elbows. Function: Must be factory-installed on pipe and elbow ends for proper alignment and connection. Material: Aluminum. Quantity: 41 6. Clamp for Connections Part Code: 34241 Description: 34-inch QuickDraw clamp to secure the outer flange connections. Sealing: Must have a built-in self-sealing rubber gasket to ensure an airtight seal. Material: Aluminum. Quantity: 21 7. Flange for 28-inch Port Part Code: 286G Description: 28-inch aluminum flange. Function: Must be factory-installed on the 28-inch outlet of the reducing cross fitting. Quantity: 1 8. Flange for 12-inch Ports Part Code: 126G Description: 12-inch aluminum flange. Function: Must be factory-installed on the two 12-inch branches of the reducing cross fitting. Quantity: 2
Attachments/Links
Contact Information
Contracting Office Address
  • MICC FORT DRUM 4205 PO VALLEY RD
  • FORT DRUM , NY 13602-5220
  • USA
Primary Point of Contact
Secondary Point of Contact


History

Related Document

Sep 21, 2026[Combined Synopsis/Solicitation (Original)] DOUBLE WALL INSULATED DUCTING
Sep 22, 2026[Combined Synopsis/Solicitation (Updated)] DOUBLE WALL INSULATED DUCTING
Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.
View Sample Report Start Free Trial

See Also

KB DUCTING

Follow KB DUCTING Active Contract Opportunity Notice ID W911S226U4544 Related Notice Department/Ind. Agency

DEPT OF DEFENSE

Due by 10/01/2026

DOUBLE WALL INSULATED DUCTING

Follow DOUBLE WALL INSULATED DUCTING Active Contract Opportunity Notice ID W911S226U4509 Related Notice

DEPT OF DEFENSE

Due by 9/29/2026

DOUBLE WALL INSULATED DUCTING

Follow DOUBLE WALL INSULATED DUCTING Active Contract Opportunity Notice ID W911S226U4509 Related Notice

DEPT OF DEFENSE

Due by 9/29/2026

* Disclaimer: This website provides information about bids, requests for proposals (RFPs), or requests for qualifications (RFQs) for convenience only and does not serve as an official public notice. Individuals who wish to respond to or inquire about bids, RFPs, or RFQs should contact the relevant government department directly.