CONSTRUCTION MANAGEMENT SERVICES FOR FAMU ? FSU COLLEGE OF ENGINEERING BUILDING C

>	
SU
R	'bjbj@@	.D* k* k$$"""""1"1"1"1"$U"T1"(p
"=#=#=#=#$$$((*(*(*(*(*(*(),h*("$$$$$*(""=#=#?(L'L'L'$
"=#"=#((L'$((L'L'L'=#q=?.
"$RL'(U(0(L'-t$-L'-"L'$$L'$$$$$*(*('@$$$($$$$-$$$$$$$$$$ :

	Notice of Bid/Request for Proposal

HYPERLINK "https://flrules.org/gateway/department.asp?id=6" \t "department"
DEPARTMENT OF EDUCATION
HYPERLINK "https://flrules.org/gateway/organization.asp?id=200" \t "organization"
Florida State University
CONSTRUCTION MANAGEMENT SERVICES FOR FAMU  FSU COLLEGE OF ENGINEERING BUILDING C
NOTICE TO PROFESSIONAL CONSULTANTS: CONSTRUCTION MANAGEMENT SERVICES FOR FAMU  FSU COLLEGE OF ENGINEERING BUILDING C
Florida State University announces that Professional Services in the discipline of Construction Management Services will be required for the project listed below:
RFQ NUMBER: RFQ 6821-J (HYPERLINK "https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=FSU"
FSU Procurement Portal)
PROJECT NAME AND LOCATION: CONSTRUCTION MANAGEMENT SERVICES FOR FAMU  FSU COLLEGE OF ENGINEERING BUILDING C
Project Description: Florida State University (FSU), as Owner, is hereby soliciting Statements of Qualifications for selection of a general contractor to provide Construction Management Services for a new 165,000 gross SF Engineering Building to be constructed adjacent to the existing FAMU-FSU College of Engineering on the FSU SW Campus, in accordance with the terms, conditions, and requirements set forth in this Request for Qualifications (RFQ). It is the Owners desire to have this new Structure constructed to a level of quality and timeliness that reflects the long-term use of a facility to meet owner requirements. Construction Manager (CM) to submit a cost proposal based on Design Development package.
Project construction delivery will be Construction Management at Risk.
PROJECT SOLE POINT OF CONTACT for the RFQ will be:
Mitchell L. Jermyn, CPSM
Strategic Category Manager
Florida State University
Office: (850)644-9730
HYPERLINK "mailto:mjermyn@fsu.edu"
mjermyn@fsu.edu
Respondents to this RFQ or persons acting on their behalf SHALL NOT contact any employee or officer of FSU, Board of Trustees, or a University Direct Support Organization concerning any aspect of this RFQ, except in writing to the Sole Point of Contact or Chief Procurement Officer or as provided in this RFQ document, from the date of release of this RFQ through the end of the 72-hour period following FSUs posting of the notice of intended award, in accordance with Board of Governors (BOG) Regulation 18.002. Violation of this provision may be grounds for rejecting a proposal response.
INSTRUCTIONS:
Firms desiring to provide professional services shall utilize the online electronic sourcing portal to submit the required information for which they are applying. Firms shall complete all of the questions and provide a copy of the applicant's current Professional Registration Certificate from the appropriate governing board via the online electronic sourcing portal as described below. Documents must be uploaded to the portal and may not exceed 40 pages. Submittals that do not comply with these requirements or do not include the requested data may not be considered.
Blanket professional liability insurance in the amount of $2,000,000 will be required.
The plans and specifications for campus service projects are subject to reuse in accordance with the provisions of Section 287.055, Florida Statutes.
All applicants must be licensed to practice their respective professional discipline in the State of Florida at the time of application.
As required by Section 287.133, Florida Statutes, a person or affiliate may not submit a proposal for this project if included on the convicted vendor list for a public entity crime committed within the past 36 months. The selected firm must warrant that it will neither utilize the services of, nor contract with, any consultant, subconsultant, supplier, contractor, or subcontractor for more than $50,000.00 in connection with this project for a period of 36 months from the date of their being placed on the convicted vendor list.
The University reserves the right to suspend or discontinue the selection process at any time and return or reject any or all submissions of proposals without obligation to the respondent.
The Florida State University Project Fact Sheet (main RFQ document) and amendments may be obtained online at HYPERLINK "https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=FSU"
https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=FSU.
SELECTION SCHEDULE:
The anticipated schedule for selection, award and negotiation is as follows:
TaskDateFSU Releases (FSU Public Procurement Portal Open Date) RFQ3/31/2026Optional Info Session with Design Professional (11AM ET)
Join: HYPERLINK "https://teams.microsoft.com/meet/21316641451715?p=Qllq7VbPGPZdKlWZww"
https://teams.microsoft.com/meet/21316641451715?p=Qllq7VbPGPZdKlWZww
Meeting ID: 213 166 414 517 15
Passcode: Lj3Q3wp64/6/2026Question Submission no later than 5 pm ET4/17/2026Answer Submission 4/24/2026Submittals Due (FSU Public Procurement Portal Close Date) from Respondents no later than 5PM ET5/15/2026Shortlist Interviews (estimated)TBDNegotiations Begin on or aboutTBDFSU Posts Intent to Award on or aboutTBDUnless otherwise revised by a subsequent addendum to this RFQ, the dates and times by which stated actions should be taken or completed are listed above. If FSU determines, in its sole discretion, that it is necessary to change any of these dates and times, it will issue an Addendum to the RFQ. All times listed are Eastern Standard Time (EST). It is the Respondents responsibility to check FSUs Public Procurement Portal for any updates or addendums to this RFQ.
****PLEASE CAREFULLY NOTE NEW SUBMITTAL INFORMATION****
FSU utilizes an online electronic sourcing portal for accepting qualifications submittals digitally. We do not accept hard copy submissions or submissions through other medium other than through HYPERLINK "https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=FSU"
https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=FSU
Your submission must be uploaded prior to the as indicated above. Note: We strongly recommend that you give yourself sufficient time and at least ONE (1) hour before the Closing date/time to begin the uploading process and to finalize your submission. Late submissions due to electronic uploading delays will not be considered.
 Each item of requested information is instantly sealed (no one from FSU can review) and will only be visible after the closing date/time. You may edit your submission as needed up to the closing date/time.
 Responders may elect to utilize the import/export feature to export questions into Excel in order to work on responses offline and import into the system upon completion.
 Keep in mind that when answering questions in the provided text box within the system (if applicable) there is a limit to the number of characters you can use in your response. The dynamic character limit counter at the bottom of each text box will display the remaining characters available.
 Uploading large documents may take significant time, depending on the size of the file(s) and your Internet connection speed. The maximum upload file size is 50 MB.
 Please do not embed any documents within your uploaded files, as they will not be accessible or evaluated.
 Information submitted that is not requested by FSU or in the specific format requested will be considered to be supplemental and not subject to evaluation.
 All sourcing event-related communications between vendors and FSU is managed and tracked through a Question-and-Answer Board within the RFQ event on the Public Procurement Portal. Any issues or questions related to logging in or technical issues, including attachments, can be submitted to our third-party software host, Jaggaer via a Support form: HYPERLINK "https://www.jaggaer.com/service-support/supplier-support/"
https://www.jaggaer.com/service-support/supplier-support/ or by calling (800)233-1121.
Applications that do not comply with the above instructions wil