CoCR Powder Study Service

Agency:	DEPT OF DEFENSE
State:	Oklahoma
Type of Government:	Federal
FSC Category:	J - Maintenance, Repair, and Rebuilding of Equipment
NAICS Category:	541380 - Testing Laboratories
Posted Date:	Jun 16, 2025
Due Date:	Jun 27, 2025
Solicitation No:	Serv_C25-072
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Active

Contract Opportunity

Notice ID

Serv_C25-072

Related Notice

Department/Ind. Agency

DEPT OF DEFENSE

Sub-tier

DEPT OF THE AIR FORCE

Major Command

AIR FORCE MATERIEL COMMAND

Sub Command

AIR FORCE SUSTAINMENT CENTER

Office

FA8125 AFSC PZIMA

Looking for contract opportunity help?

(opens in new window)

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

Contract Opportunity Type: Sources Sought (Original)
Original Published Date: Jun 16, 2025 01:36 pm CDT
Original Response Date: Jun 27, 2025 10:00 am CDT
Inactive Policy: 15 days after response date
Original Inactive Date: Jul 12, 2025
Initiative:
- None

Classification

Original Set Aside:
Product Service Code: J066 - MAINT/REPAIR/REBUILD OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT
NAICS Code:
- 541380 - Testing Laboratories and Services
Place of Performance:
Tinker AFB , OK 73145

USA

Description

The Air Force is looking for sources to complete the following service:

Contractor shall provide Testing, Evaluation, Machining and Sample Prep for the following Samples.

Fatigue Samples:

616 Additively manufactured CoCr LCF samples supplied by the 76th CMXG must be machined (turned, ground and polished) per P01AD003 and tested IAW with ASTM E606 and ASTM E466 to the following test parameters:

•Strain Rate = As Specified by customer on a per sample bases (matrix linking serial numbers to strain rates to be supplied at a later date)

•Starting Frequency = 0.5Hz; frequency may be increased to 9Hz after 24hrs, and hysteresis loops stabilize.

•Temp = Room Temp

•Specimen geometry = Per drawings 202320497 (440 samples) and 202320495 (88samples) and 202320499 (88 samples)

Tensile Samples:

264 Additively manufactured CoCr tensile samples supplied by the 76th CMXG must be machined (turned and ground) per P01AD003 and tested IAW ASTM E8 with the following test parameters:

•Temp = Room Temp

•Specimen geometry = Per drawing 202320493

•Report UTS, 0.2%YS, %EL (4D) and %RA

Waivers may be issued for the grip design on fatigue and tensile samples with prior approval from 76th CMXG/REACT and confirm that it meets the design intent of P01AD003. Specimen threads must be ground to meet the requirements of P01AD003, regardless of drawing allowances. Gauge sections shall meet the requirements of the referenced drawings and the requirements of P01AD003, no exceptions allowed.

A Firm Fixed Price type contract is contemplated.

System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 541380 with a size standard of $19M.

Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).

For further information contact:

Sondra Groth

Contracting Specialist

Sondra.groth@us.af.mil

Attachments/Links

Contact Information

Contracting Office Address