CJD Induction Brazing System
| Agency: | DEPT OF DEFENSE |
|---|---|
| State: | Washington |
| Type of Government: | Federal |
| FSC Category: |
|
| NAICS Category: |
|
| Set Aside: | Total Small Business Set-Aside (FAR 19.5) |
| Posted Date: | Apr 25, 2025 |
| Due Date: | May 9, 2025 |
| Solicitation No: | W68MD950910298 |
| Original Source: | Please Login to View Page |
| Contact information: | Please Login to View Page |
| Bid Documents: | Please Login to View Page |
Description
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Sources Sought (Original)
- Original Published Date: Apr 25, 2025 07:27 am PDT
- Original Response Date: May 09, 2025 11:00 am PDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: May 24, 2025
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 3424 - METAL HEAT TREATING AND NON-THERMAL TREATING EQUIPMENT
-
NAICS Code:
- 332811 - Metal Heat Treating
-
Place of Performance:
Bridgeport , WA 98813USA
The vendor shall provide a Medium Frequency 50kW Mobile Induction Brazing System to the specifications listed below. All components shall be new, and the Induction Brazing System shall be shipped to: US Army Corps of Engineers, ATTN: Mikal Miller, Chief Joseph Dam, HWY 17 and Pearl Hill Road, Bridgeport, WA 98813. The Induction Brazing System shall consist of a 1) Induction Power Supply, 2) Induction Coils, 3) Chiller, and 4) Mobile Cart. Specifications for each component are listed below:
Induction Brazing System Specifications
Induction Power Supply Specifications:
Must be able to provide a minimum of 50kW at 100% continuous duty.
Must have electronic impedance matching for maximum power delivered over different induction coil configurations and work piece dimensions.
Must be able to accept input power from 480V 3-phase outlets, 60Hz. The system may accept power from multiple circuits, however the current from each individual circuit must not exceed 100A.
Must include a handheld brazing tool with pushbutton on/off.
Must have flexible power cable between power supply and handheld brazing tool of at least 30 feet.
Must have power supply efficiency of a minimum of 90%.
Must be able to generate an inductive frequency of at least 35kHz with self-tuning capability for optimizing frequency.
Power shall be regulated using a PLC.
Induction Coil Specifications:
Must include at least three induction coils.
One coil shall be a fork-type induction coil designed for brazing copper that is 5.5" long and 0.75" wide.
One coil shall be a fork-type induction coil designed for brazing copper that is 2.75" long and 1.25" wide.
One coil shall be a fork-type induction coil, with a 45-degree bend, designed for brazing copper that is 2.75" long and 1.25" wide.
Chiller Specifications (Must include at least three induction coils):
One coil shall be a fork-type induction coil designed for brazing copper that is 5.5" long and 0.75" wide.
One coil shall be a fork-type induction coil designed for brazing copper that is 2.75" long and 1.25" wide.
One coil shall be a fork-type induction coil, with a 45-degree bend, designed for brazing copper that is 2.75" long and 1.25" wide.
Mobile Cart Specifications:
Must include a mobile cart that allows the inductive power supply and cooking system to be moved together on the same cart. A system where the inductive power supply moves relative to the cooling system is not acceptable.
Mobile cart must allow staff to move brazing system across a flat surface without using other equipment.
Cart must have lockable wheels.
Cart must have pick points for movement by crane.
- KO CONTRACTING DIVISION 4735 EAST MARGINAL WAY SOUTH
- SEATTLE , WA 98134-2329
- USA
- Della S. Overton
- della.s.overton@usace.army.mil
- Phone Number 2067646170
- Apr 25, 2025 07:27 am PDTSources Sought (Original)
See Also
Follow Notice of Intent to Sole Source - Republic Machinery Co, Inc Active
DEPT OF DEFENSE
Due by 9/18/2026
Follow One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine Active Contract
DEPT OF DEFENSE
Due by 10/26/2026
Follow EDM FORM P 600 Active Contract Opportunity Notice ID SPMYM226Q0169 Related Notice
DEPT OF DEFENSE
Due by 9/15/2026
Follow Notice of Intent to Sole Source - Republic Machinery Co, Inc Active
DEPT OF DEFENSE
Due by 9/18/2026