Central Piedmont Community College Harper Campus Lineworker Training Facility

Agency:	State Government of North Carolina
State:	North Carolina
Type of Government:	State & Local
NAICS Category:	561210 - Facilities Support Services 611430 - Professional and Management Development Training
Posted Date:	Jan 20, 2026
Due Date:	Feb 13, 2026
Solicitation No:	88-012026-01
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Solicitation Number:	88-012026-01
Project Title:	Central Piedmont Community College Harper Campus Lineworker Training Facility
Description:	Construction of the site and buildings for a Lineworker Training Facility including a 6,555 SF prefabricated metal building, a 370' x 200' Driver Training Pad, outdoor pole yard, training vault, 70'H Training Pole, and covered parking area with a vehicle wash. Project includes significant site work to clear and grade.
Opening Date:	2/13/2026 3:00 PM
Posted Date:	1/21/2026
Status:	Open
Department:	CENTRAL PIEDMONT COMMUNITY COLLEGE


Solicitation Number * 88-012026-01	Department CENTRAL PIEDMONT COMMUNITY COLLEGE	Status Reason Open
Opening Date 2026-02-13T15:00:00.0000000	Posted Date * 2026-01-20T16:27:31.0000000Z	Commodity Code Nonresidential building construction services
Mandatory Conference/Site Visit — —	Special Instructions Non-mandatory pre-bid meeting will be held. See proposal for all proposal details and instructions	Solicitation Type * Select RFP IFB RFI
Owner Bonnie Ogden
Description Construction of the site and buildings for a Lineworker Training Facility including a 6,555 SF prefabricated metal building, a 370' x 200' Driver Training Pad, outdoor pole yard, training vault, 70'H Training Pole, and covered parking area with a vehicle wash. Project includes significant site work to clear and grade.

Attachments CPCC NoticeToBidders-88-012026-01.pdf (109.03 KB)

Attachment Preview

(88-012026-01)

N O T I C E TO B I D D E R S

Sealed proposals will be received by Central Piedmont Community College in Charlotte,NC, in

the office of Planning and Design, Drumm Facilities Services Building, 1325 E. 7th St., Charlotte,

NC 28204 up to 3:00 pm, Wednesday, February 13, 2026 and immediately thereafter publicly

opened and read for the furnishing of labor, material and equipment entering into the

construction of

CPCC Harper Campus Lineworker Training Facility

Project scope includes providing a new Lineworker Training Facility at the Harper Campus.

The facility includes 6,555 SF prefabricated metal building that will contain a classroom, office

space, conference room, breakrooms, an interior pole yard with eight utility poles w/ a

mezzanine and additional support spaces. In addition to the building the project features a 370’

x 200’ Driver Training Pad, and outdoor pole yard, training vault, 70’H Training Pole and a

covered parking area with a vehicle wash. The project will include significant site work to clear

and grade the existing property for the driving pad and additional Work indicated in the Contract

Documents.

Bids will be received for a single prime contract. All proposals shall be lump sum.

Pre-Bid Meeting

An open, pre-bid meeting will be held for all interested bidders on January, 22nd, 2026, 2:00pm-

4:00pm at Harper I, Room 108, 315 W. Hebron St., Charlotte, NC 28273. The meeting will

address project specific questions, issues, bidding procedures and bid forms. There will be a

Owner/Designer led site walk immediately following the pre-bid meeting.

Complete plans, specifications and contract documents will be available for electronic download

in the offices of:

Architect: C Design Inc. – 1000 W. Morehead St., Suite 170, Charlotte, NC 28202. Phone: 704.333.0093

Alexus Jones – ajones@cdesigninc.com

and in the plan rooms of the Associated General Contractors, Carolinas Branch, in the local

North Carolina offices of McGraw-Hill Dodge Corporation, and in the Eastern Regional Office of

Reed Construction Data in Norcross, GA. Metrolina Minority Contractors Association, 3124 W.

Trade Street, Unit A, Charlotte, NC 28202. Ph. 704-332-5746

The Owner reserves the unqualified right to reject any and all proposals.

NOTE: The bidder shall include with the bid proposal the form Identification of Minority

Business Participation identifying the minority business participation it will use on the project

and shall include either Affidavit A or Affidavit B as applicable. Forms and instructions are

included within the Proposal Form in the bid documents. Failure to complete these forms is

grounds for rejection of the bid. (GS143-128.2c Effective 1/1/2002.)

All contractors are hereby notified that they must have proper license as required under the

state laws governing their respective trades.

SCO-Notice To Bidders 2010 – (Updated Dec. 2010)

General contractors are notified that Chapter 87, Article 1, General Statutes of North Carolina,

will be observed in receiving and awarding general contracts. General contractors submitting

bids on this project must have license classification for Building Contractor per NCAC Title 21

Chapter 12A .0202, and License Limitations for Unlimited License per GS 87-10

Section a1 – Limitation Definitions / NCAC Title 21 Chapter 12A .0204 – New License

Applications.

NOTE--SINGLE PRIME CONTRACTS: Under GS 87-1, a contractor that superintends or

manages construction of any building, highway, public utility, grading, structure or

improvement shall be deemed a “general contractor” and shall be so licensed. Therefore a

single prime project that involves other trades will require the single prime contractor to

hold a proper General Contractors license. EXCEPT: On public buildings being bid single

prime, where the total value of the general construction does not exceed 25% of the total

construction value, contractors under GS87- Arts 2 and 4 (Plumbing, Mechanical &

Electrical) may bid and contract directly with the Owner as the SINGLE PRIME

CONTRACTOR and may subcontract to other properly licensed trades. GS87-1.1- Rules

.0210

Each proposal shall be accompanied by a cash deposit or a certified check drawn on some

bank or trust company, insured by the Federal Deposit Insurance Corporation, of an amount

equal to not less than five percent (5%) of the proposal, or in lieu thereof a bidder may offer a

bid bond of five percent (5%) of the bid executed by a surety company licensed under the laws

of North Carolina to execute the contract in accordance with the bid bond. Said deposit shall be

retained by the owner as liquidated damages in event of failure of the successful bidder to

execute the contract within ten days after the award or to give satisfactory surety as required by

law.

A performance bond and a payment bond will be required for one hundred percent (100%) of

the contract price.

Payment will be made based on ninety-five percent (95%) of monthly estimates and final

payment made upon completion and acceptance of work.

No bid may be withdrawn after the scheduled closing time for the receipt of bids for a period of

30 days.

The Owner reserves the right to reject any or all bids and to waive informalities.

Designer:

C Design Inc.

1000 W. Morehead St.

Suite 170

Charlotte, NC 28209

Tel: 704.333.0093

email: ajones@cdesigninc.com

Owner:

Central Piedmont Community College

Drumm Facilities Services Building,

1325 E. 7th St., Charlotte, NC 28204.

Tel: 704-330-6166

SCO-Notice To Bidders 2010 (Updated Dec. 2010)

This page summarizes the opportunity, including an overview and a preview of the attached documents.

Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.

View Sample Report Start Free Trial

Central Piedmont Community College Harper Campus Lineworker Training Facility

Description

Attachment Preview

See Also