Canycom S300PD Heavy-duty Carrier with 180° Pivoting Dump Box

The Canycom S300PD Heavy-duty Carrier with 180° Pivoting Dump Box is powered with a 47 HP Tier 4 Kubota Diesel engine and hauls up to 6,614 lbs. Suitable for grades up to 25°. The Pivoting Dump Box and Rubber Track Undercarriage results in reduced ground impact and increased maneuverability.

• Engine required - Diesel Kubota Engine with at least 40 horsepower to deliver the power needed for working conditions.

• Payload Capacity of at least 6,000lbs to transport heavy loads of trail materials

• Weight of the equipment needs to be less than 6,000lbs for trailering/towing to work for our trailer & truck setup, as well as for driving over trail infrastructure like bridges without exceeding limits

• Bed ⁄ Bucket Capacity needs to be at least 50 cubic ft or 1.85 cubic yards

• Speed of machine should be at least 5 mph to move materials around for projects at an effective, efficient and productive rate

• Dimensions required: Needs to be Less than 96" in height to fit inside our storage facility and get down majority of trails where the corridor height is averaged to be 8ft high. The length cannot exceed 156" in length(13ft) to fit on our trailer for transportation and cannot exceed 6ft in width to fit on our trailer for transportation.
• Preferred width is between 5 & 6ft wide to fit down majority of trails where this equipment is warranted.

• The bucket/bed Dimensions required: Minimum of 7ft long to accommodate most loader buckets to load the equipment with materials without spillage/damaging the equipment, and at least 4ft wide to accommodate a variety of trail construction material shapes/sizes.

• Transmission needs to be automatic Hydrostatic We will not accept a manual transmission

• Bed ⁄ Bucket function needs to have a 90° Dump, 180° Pivoting rotation for the most effective & efficient dumping of trail project materials during construction projects

• Operators seat/controls needs to have a ride on operators’ station that rotates 180° for driving in and out of trails that do not offer turnaround ability of the equipment and maximum visibility of travel direction is needed.

• ROPS with FOPS or Cab with Windows required for safety and best operators’ visibility of there working area.
• Equipment needs to operate on Rubber tracks, not Steel and no wheels.