Calibration/Maintenance of Biomedical Test, Measurement and Diagnostic Equipment Services

GENERAL SCOPE OF WORK The company will provide a trained technician who shall perform calibration and preventive maintenance services for the items listed in the enclosed Equipment lists provided in the package for USNHY enterprise. The company will provide all supplies and transportation for technicians to perform the stated calibration and maintenance. The scope of work performed under these specifications includes the furnishing of all labor to perform all requested services on listed equipment. The Contractor shall maintain the equipment within the original equipment manufacturer (OEM) specification, in accordance with the Federal, State, and Local law regulations, U.S. Navy regulations, DHA instructions, and the Joint Commission requirement. The company will calibrate the equipment to the ISO 17025 standards and ANSI Z540.3 which are required by DHA-Inspector and guidance outlined in DHA-AI 6430.11. U.S. Navy regulations and instructions will be made available upon request. When product recalls or upgrades are necessary to maintain the equipment in service within the original manufacture, only OEM trained and National Association of Special Equipment Distributors (NASED) certified repair personnel to provide maintenance services on the equipment. In the event a contractor finds that a repair is needed, contractor shall provide a quote and upon approval of the quote the repair shall be conducted.