Building F20016 Furniture, Project 2026SH026

Active

Contract Opportunity

Update as of 20 May 2026

Due to the updates below, the deadline for submissions has been extended to Wednesday, 27 May, at 12:00PM EST.

Q+A document added to "Attachments", titled "Q and A_FA8601-12-Q-0046_20 March 2026_Signed".

Additional attachments added to "Attachments". Specifically, attachments 8, 9, and 10, which consist of additional furniture and carpet plans.

DWG files are available, but due to file type, we are unable to attach in SAM.gov. If you would like a copy of the DWG files, please reach out to the Contract Specialist, Nasir Rashid, at nasir_al-din.rashid.1@us.af.mil, and the Contracting Officer, Claire Hess, at claire.hess@us.af.mil.

Updated Statement of Work (SOW) added to "Attachments", dated 13 May 2026. T-1: Conference Room Table dimensions updated to 60" D x 288" W.

---------------------------------------------------------------------------------------------------------------

Combined Synopsis/Solicitation

AFLCMC/PZI Installation Contracting Support

Wright Patterson AFB, OH 45323

Date: 7 May 2026

Title: Furniture Building F20016, Project 2026SH026

Request for Quote (RFQ) / Solicitation Number: FA860126Q0046

Quotes Due: 27 May 2026 at 12:00 PM EST

Contact Point(s): Nasir al-Din Rashid, Contract Specialist; nasir_al-din.rashid.1@us.af.mil

Contact Point(s): Claire Hess, Contracting Officer; claire.hess@us.af.mil

1. Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information, included in this notice. This announcement constitutes the only solicitation; quotes are being requested and an additional written solicitation will not be issued. The solicitation is conducted as a commercial procurement using Simplified Acquisition Procedures (FAR Part 13). This notice is expected to result in award of a Firm Fixed Price (FFP) contract for a commercial commodity to the responsible offeror who submits a quotation that: (1) conforms to the requirements, (2) complies with the minimum requirements stated in the Statement of Work (SOW) as evidenced by providing a complete description of the equipment provided, and (3) that submits the quotation with the lowest price technically acceptable, provided that the price is determined to be fair and reasonable.

The Government reserves the right to conduct interchanges with some, none, or all offerors, or make no award at all depending upon: 1) the quality of quotations received, and 2) whether proposed prices are determined to be fair and reasonable.

This requirement shall include a 100% Small Business Set Aside under NAICS 337214 with a size standard of 1100 Employees.

Requirement: All items listed below in accordance with Statement of Work (SOW)

CLIN Supplies/Service Quantity Unit

0001 CH-1: Mid-Back Conference Room Chair 38 Each

0002 CH-2: mesh Back Upholstered Seat Guest Chair 24 Each

0003 CH-3: Poly Breakroom Chair 8 Each

0004 T-1: 60” x 288” Conference Room Table 1 Each

0005 T-2: 48” x 144” Conference Room Table 1 Each

0006 T-3: 36” x 36” Break Room Table 1 Each

0007 BC-1: Buffet Credenza 2 Each

0008 MCC-1: Mobile Computer Cart 2 Each

0009 SP-1: 42” x 22” x 73” Shelf Partition 1 Each

0010 GB-1: 48”x96” Magnetic Glass Board 2 Each

0011 CPT-1: Interface Open Air Collection/Carpet 1 Each

0012 LVT-1: Interface Brushed Lines Floor 1 Each

0013 Design 1 Each

0014 Furniture Freight, Receiving, Delivery, & Installation 1 Each

1. Period of Performance: The delivery is required within 160 days After Receipt of Order (ARO).

1. Request for Information (RFIs): The Government will accept questions concerning solicitation number FA860126Q0046 until 15 May 2026 at 4:00 PM EST. Email your questions on a .pdf, .doc, .docx, .xls or .xlsx document to nasir_al-din.rashid.1@us.af.mil and claire.hess@us.af.mil. Any questions received after this date and time may not be considered.

1. Quotes Due Date: Quotes must be submitted electronically to the Contract Specialist via e-mail at nasir_al-din.rashid.1@us.af.mil and Contracting Officer at claire.hess@us.af.mil. Quotes must conform to the requirements of this solicitation and be received no later than 27 May 2026 at 12:00 PM EST. It is the responsibility of the offeror to ensure that the quote and its attachments are received. Any correspondence sent via e-mail must contain the subject line “FA860126Q0046, Furniture F20016 Project 2026SH026” The entire quotation must be contained in a single e-mail that does not exceed 5 megabytes including attachments, if any. E-mails with compressed files are not permitted. Note that e-mail filters at Wright-Patterson Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. If a DoDSafe drop off is needed, please notify the contract specialist or contracting officer at least 48 hours before quotes are due. Any quotes received after designated closing date and time need not be considered. Quotes must include aggregate total of base plus all option year CLINS, if requested (IAW FAR 52.217-5 Evaluation of Options). All quotes shall be in whole dollars and conform to the Contract Line-Item Number (CLIN) structure of attached solicitation.

1. Notice to Vendor(s): The Government reserves the right to cancel this solicitation, either before or after the closing date.

1. Period of Acceptance of Quotes: Offeror agrees to hold prices in its quote firm for 120 calendar days from the date specified for receipt of offers.

1. SAM Registration: Firms submitting a quote for the solicitation described herein, MUST be registered in the System for Award Management (SAM) database, or risk the quote as being non-responsive, regardless of the package being considered complete, timely or any other salient consideration. Information to register on SAM can be found at the web site, SAM.gov.

1. Mandatory Cybersecurity Maturity Model Certification (CMMC) Level 1 Assessment: In accordance with R- DFARS 252.204-7021 and R-DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors. To be eligible for contract award, offerors must demonstrate full compliance with the 15 basic safeguarding requirements outlined in RFO 52.240-93. The contractor is responsible for entering the assessment results into the Procurement Integrated Enterprise Environment (PIEE), specifically within the Supplier Performance Risk System (SPRS) module. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record. If you require assistance in completing this requirement, please reach out to the Contracting Specialist and Contracting Officer for this effort.

1. Provisions and Clauses: See solicitation attachment for applicable provisions and clauses. Offerors shall complete and include in quotations all representations and certifications, as well as all fill-in provisions and clauses, contained within this solicitation. Additionally, quotations that contain pricing only with no description/detail of the equipment that will be provided will not be accepted or considered for award.

List of Attachments:

1. Combo Synopsis/Solicitation_FA8601-26-Q-0046


2. Solicitation FA8601-26-Q-0046


3. Statement of Work


4. Optional Carpet BPA Instructions


5. 05a -ID-1 F20016 Furniture Plan 1.1


6. 05b -ID-2 F20016 Furniture Plan 1.2


7. 05f-Interface_Brushed Lines 4_5 mm_Spec


8. 05c -ID-3 F20016 Carpet Finish Plan


9. 05d -ID-4 F20016 LVT Finish Plan


10. 05e-Interface_Open Air 411_Spec

Attachments/Links