Bridgeton High School Building Envelope & Roof and Masonry Repairs

Agency: New Jersey Schools Construction Corporation
State: New Jersey
Type of Government: State & Local
NAICS Category:
  • 236220 - Commercial and Institutional Building Construction
  • 238140 - Masonry Contractors
  • 238160 - Roofing Contractors
Posted Date: May 4, 2020
Due Date: Jun 17, 2020
Solicitation No: EP-0105-C01
Bid Source: Please Login to View Page
Contact information: Please Login to View Page
Bid Documents: Please Login to View Page
contract no. rebid no. district general description advertisement date prebid conference date proposal due date bid open addendum#
EP-0105-C01 Bridgeton Bridgeton High School Building Envelope & Roof and Masonry Repairs 05/04/2020 05/18/2020 06/17/2020 06/17/2020 NA

Attachment Preview

Contract No.
EP-0105-C01
Contract Name
Bridgeton High School
Building Envelope – Roof and Masonry Repairs
School District
Bridgeton
Construction Cost Estimate
Range
$6,800,000 - $7,900,000
ADVERTISEMENT
The New Jersey Schools Development Authority (“NJSDA”) is seeking to procure a General Contractor for the
Bridgeton High School Building Envelope – Roof and Masonry Repairs project in Bridgeton, NJ.
Brief Description of Work:
General Construction services for the following scope of work:
1. Replacement of existing roofing system including insulation, flashing and coping;
2. Repair or raise wood blocking as necessary;
3. Steel deck repair as needed;
4. Remove unneeded equipment at identified locations and infill deck openings;
5. Repair or repoint masonry in locations identified in the plans; and
6. Replace window lintels.
This work will be bid and constructed as a single overall contract (one lump sum for all trades).
Eligibility Requirements for Bidders and Identification of Required Subcontractors:
Bid proposals for the above work will be received from bidders registered with the Division of Revenue and the
Department of Labor and Workforce Development pursuant to the Public Works Contractor Registration Act N.J.S.A.
34:11-56.48 et seq., and classified by the Department of the Treasury-Division of Property Management and
Construction (“DPMC”), and prequalified by the NJSDA in the following trade(s):
General Construction Contractor with a DPMC Classification and NJSDA Prequalification of C006 or
C008 or C009 who will be required to also have the following DPMC and NJSDA Specialty Trade(s) or
required to engage a subcontractor(s) classified in the following DPMC and NJSDA Specialty Trade(s)
if not possessed by the Construction Contractor:
Structural Steel
Plumbing
HVACR
Electrical
Roofing – Membrane EPDM
C029
C030
C032
C047
C066
Bid proposals must list the names of the firms who meet the above classification(s).
Pursuant to N.J.S.A. 52:32-44, the NJSDA is prohibited from entering into a contract with an entity unless the Bidder
and each subcontractor that is required by law to be named in a bid has a valid Business Registration Certificate on
file with the Division of Revenue and Enterprise Services within the Department of the Treasury. Prior to contract
award or authorization, the selected Bidder shall provide NJSDA with its proof of business registration and that of any
named subcontractor(s).
In accordance with the requirements of N.J.S.A. 52:18A-243, each Bidder is required to set forth in its bid the name
or names of all subcontractors to whom the Bidder will directly subcontract for the furnishing of any of the work and
materials specified in the plans and specifications for the following branches:
1. The plumbing and gas fitting and all work and materials kindred thereto (“Plumbing Branch”)
2. The steam and hot water heating and ventilating apparatus, steam power plants and all work and materials
kindred thereto (“HVACR Branch”)
3. The electrical work (“Electrical Branch”)
4. The structural steel and miscellaneous iron work and materials (“Structural Steel Branch”)
When naming subcontractors in accordance with this section, a Bidder is required to name only those subcontractors
that are engaged directly by the Bidder (“first-tier subcontractors”). Bidders are NOT REQUIRED to name any
subcontractors engaged by the first-tier subcontractors or by others (e.g., “second-tier subcontractors” or “third-tier
subcontractors.”)
All subcontractors required to be named under this section must be DPMC classified and NJSDA prequalified as of
the submittal due date for bids. Each Bidder shall adhere to the following instructions in its identification of all
subcontractors with whom the Bidder will contract in the four branches:
1. Plumbing Branch: The Bidder must identify a subcontractor that is DPMC classified and NJSDA
prequalified in the trade of Plumbing (C030), unless the Bidder intends to self-perform for this trade. If the
Bidder intends to self-perform, the Bidder must identify itself as self-performing in the trade of Plumbing
(C030). If the Bidder will contract with any additional subcontractors with DPMC Trade Classifications in
the Plumbing trade or other trades applicable to this branch, each such additional subcontractor must be
identified.
2. HVACR Branch: The Bidder must identify a subcontractor that is DPMC classified and NJSDA
prequalified in the trade of HVACR (C032), unless the Bidder intends to self-perform for this trade. If the
Bidder intends to self-perform, the Bidder must identify itself as self-performing in the trade of HVACR
(C032). If the Bidder will contract with any additional subcontractors with DPMC Trade Classifications in the
HVACR trade or other trades applicable to this branch, each such additional subcontractor must be identified.
3. Electrical Branch: The Bidder must identify a subcontractor that is DPMC classified and NJSDA
prequalified in the trade of Electrical (C047), unless the Bidder intends to self-perform for this trade. If the
Bidder intends to self-perform, the Bidder must identify itself as self-performing in the trade of Electrical
(C047). If the Bidder will contract with any additional subcontractors with DPMC Trade Classifications in
the Electrical trade or other trades applicable to this branch, each such additional subcontractor must be
identified.
4. Structural Steel Branch: The Bidder must identify a subcontractor that is DPMC classified and NJSDA
prequalified in the trade of Structural Steel (C029), unless the Bidder intends to self-perform for this trade. If
the Bidder intends to self-perform, the Bidder must identify itself as self-performing in the trade of Structural
Steel (C029). If the Bidder will contract with any additional subcontractors with DPMC Trade Classifications
in the Structural Steel trade or other trades applicable to this branch, each such additional subcontractor must
be identified.
In addition to all other requirements listed above, the NJSDA further requires all subcontractors of any tier in the
DPMC Trade Classifications listed below whose contract is in an amount which is equal to or greater than $500,000
be DPMC classified and NJSDA prequalified.
C006 - CM as Constructor
C007 - Design Build
C008 - General Contractor
C009 - GC/Alterations & Additions
C019 - Concrete/Foundation/Footings/Masonry work
C021 - Demolition
C029 - Structural Steel
C030 - Plumbing
C032 - HVACR
C045 - Sprinkler Systems
C047 - Electrical
C066 - Roofing-Membrane EPDM
C067 - Roofing-Membrane PVC/CPE/CSPE
C068 - Roofing-Membrane Modified Bitumen
C069 - Roofing-Urethane
C070 - Roofing-Built Up
C071 - Roofing-Metal
C072 - Roofing-Tile/Slate/Shingles
C092 - Asbestos Removal/Treatment
C093 - Asbestos Removal/Mechanical
C096 - Lead Paint Abatement
Additional Procurement Requirements:
Bidders are required to comply with the requirements of N.J.S.A. 10:5-31 et seq. and N.J.A.C. 17:27 et seq.
Note that the selected Bidder shall be required to ensure that Small Business Enterprises (“SBEs”) and Disabled
Veteran Owned Businesses (“DVOBs”) have the maximum practicable opportunity to participate in the performance
of this engagement. A 25% Set-Aside Goal for SBEs and a 3% Set-Aside Goal for DVOBs have been established for
this Project.
This contract requires compliance with the New Jersey Prevailing Wage Act. This contract will be subject to the
terms of a PROJECT LABOR AGREEMENT. The PROJECT LABOR AGREEMENT will be included in the
contract and is available on the NJSDA website.
The selected Bidder shall be required to submit payroll information to the Division of Labor and Workforce
Development, with copies to the NJSDA, in accordance with the Diane B. Allen Equal Pay Act, P.L. 2018, c. 9.
Guidance and forms for compliance with this requirement are available at: www.nj.gov/labor/equalpay/equalpay.html
A firm or person or an affiliate thereof may not serve as a general contractor or as a subcontractor or as a
subconsultant on an NJSDA project for which the firm or person serves as the construction manager or as a
subcontractor or as a subconsultant to the construction manager.
Procurement Submission Dates and Deadlines:
A. A pre-bid teleconference will be held as follows:
Pre-Bid Teleconference Date:
May 18, 2020
Pre-Bid Teleconference Time:
10:00 AM (local time)
Pre-Bid Teleconference Call-In Number: 866-844-9419
Pre-Bid Teleconference Passcode:
6098582985
B. All Bidders on this project will be required to complete a Project Rating Proposal (“PRP”) form and submit
the completed PRP form, in both electronic and hard copy formats, no later than 11:00 AM (local time) on
May 20, 2020, as follows:
Submit the electronic version to Alison Perry at the following e-mail:
APerry@njsda.gov
AND
Submit the hard copy original to Alison Perry at the following address:
If submitting by Fed Ex, UPS, Courier, or Hand Delivery:
NJSDA
32 East Front Street
Trenton, NJ 08625-0991
If submitting by U.S. Mail:
NJSDA
P.O. Box 991
Trenton, New Jersey 08625-0991
The PRP FORM is available on the NJSDA website.
PLEASE NOTE: THE ELECTRONIC VERSION AND THE HARD COPY ORIGINAL OF THE PRP
FORM MUST CONTAIN IDENTICAL INFORMATION. PROVIDING INCONSISTENT
INFORMATION IN THE TWO VERSIONS OF THE PRP FORM MAY RESULT IN A
DETERMINATION THAT THE SUBMITTAL IS NON-RESPONSIVE.
C. Each prequalified firm that has submitted the required PRP form will be scheduled to receive a time slot to
participate in a mandatory site visit. Note that the mandatory site visit will be conducted in accordance with
all applicable COVID-19 State of Emergency precautions in force at the time of the site visit, including
maintaining a six-foot distance from other individuals, limiting the number of persons attending a gathering,
and requiring participants to wear face masks. The mandatory site visit will be held at: Bridgeton High
School, 111 West Avenue N, Bridgeton, NJ 08302.
In the event that the NJSDA determines, at its sole discretion, that additional pre-bid conferences and site
visits need to be held in order to increase the pool of Bidders, it shall schedule subsequent pre-bid conferences
and site visits.
D. Plans and specifications will be made available through a controlled-access website to NJSDA prequalified
firms that have submitted a PRP form, and attended the mandatory site visit.
If the Bidder has any questions or finds any perceived error or omission in the Contract Documents or any
conflict or discrepancy within the Contract Documents or between the Contract Documents and any
applicable provision of law, the Bidder shall submit written questions (referred to hereinafter as “Bidders’
Questions”) to the NJSDA for interpretation or clarification. Failure to submit said Bidders’ Questions shall
be deemed a waiver for any claims for future compensation regarding discrepancies within the Contract
Documents.
The Bidder shall be responsible for delivery of such Bidders’ Questions by 11:00 AM (local time) on June 3,
2020 to Alison Perry at aperry@njsda.gov.
All responses to such Bidders’ Questions shall be in the form of written Addenda.
E. Bids will be received until June 17, 2020 at 11:00 AM (local time). Any bid proposal received after this date
and time will be returned unopened. Sealed bid proposals will only be accepted by overnight or hand delivery
at the following address:
NJSDA
32 East Front Street
Trenton, NJ 08625-0991
Due to Executive Order COVID-19 State of Emergency precautions, the bid opening will be conducted via
video conferencing on June 17, 2020 at 11:00 AM (local time) at which time the bids will be opened and the
lump sum base bid price submitted by each Bidder will be read. Information for participation in video
conferencing will be issued to each known interested bidder, and posted on the NJSDA website at a later date.
For further information on NJSDA, please visit us at www.njsda.gov.
DATE ADVERTISED: May 4, 2020

Sign-up for a Free Trial, Government Bid Alerts

With Free Trial, you can:

You will have a full access to bids, website, and receive daily bid report via email and web.

Try One Week FREE Now

See Also

Deadline Tuesday, July 7th @ 3:00pm EST Number SJPC-CPR-07072020 Description REQUEST FOR SEALED

South Jersey Port Corporation

Bid Due: 7/07/2020

OPENING DATE at 10 am BID NAME/NO. FEE 7/21/20 Bid#0065-20 Bidder's Packet Furnishing

Monmouth County Park

Bid Due: 7/21/2020

OPENING DATE BID NAME/NO. FEE 7/22/20 Bid #0067-20 Plans 2020 Bunker Renovation at

Monmouth County Park System

Bid Due: 7/22/2020

contract no. rebid no. district general description advertisement date proposal Prebid Conference date

State Government of New Jersey

Bid Due: 7/20/2020