Bow Valley Dump Station Flow Meter Installation

Agency:	Government of Alberta
State:	Alberta
Type of Government:	State & Local
NAICS Category:	238220 - Plumbing, Heating, and Air-Conditioning Contractors 334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables 334519 - Other Measuring and Controlling Device Manufacturing
Posted Date:	Oct 31, 2024
Due Date:	Nov 14, 2024
Solicitation No:	AB-2024-09224
Original Source:	Please Login to View Page
Contact information:	Please Login to View Page
Bid Documents:	Please Login to View Page

Description

Open & competitive opportunity

Open

Forestry and Parks

Request for Quotes

Bow Valley Dump Station Flow Meter Installation

SCOPE OF WORK:
Provide labour, supplies, materials, and equipment for installation of a new flow meter. This may include, but is not limited to the following tasks:

.1 Mobilization and demobilization.
.2 Supply and install temporary fencing, signage, and barricades as per the Contractor’s Health and Safety Plan, to be approved by Alberta Parks.
.3 Perform locates and hydrovac, as necessary to identify existing buried utilities.
.4 Tree removal, clearing, and grubbing as required to facilitate access to the work area.
.5 Excavate and expose existing force main from the dump station septic tank. The force main
is deep buried, approximately 3.5 m below ground. The tie-in location to the force main is shallow buried, approximately 2.0 m below ground.
.6 Remove and dispose a section of force main to accommodate access for new piping, flow
meter, and buried concrete vault.
.7 Snow removal.
.8 Cold weather earthwork - See Section 31 23 17 Cold Weather Earthworks - 3.3 Placement
and Compaction of Fill materials – Cold Weather
.9 Prepare and compact the subgrade.
.10 Supply, deliver, install and compact bedding gravel.
.11 Supply and install new piping (50 mm HDPE outside vault or Schedule 80 PVC inside vault),
precast concrete flow meter vault, and flow meter, including bypass piping.
.12 Connect electrical power to the new flow meter, to be supplied from an existing control
panel at the dump station.
.13 Supply, deliver, install, and compact backfill material.
.14 Perform flow testing and commissioning, including supplying hauled water to fill the septic
tanks, pressure testing the HDPE pipe, draining the system and blow down. Contractor to
prepare a Commissioning Plan, to be approved by Alberta Parks. Kananaskis Region
Operations will confirm operation of the flow meter during commissioning in May 2025 and
any outstanding issues will be resolved by the Contractor as part of the warranty period.
.15 Complete surface restoration to the existing naturalized area including topsoil and seed.
.16 Clean up work area.

APC Reference # AB-2024-09224

Category Construction

Posting Date • Time Oct 31, 2024 • 10:23 am (MT)

Closing Date • Time Nov 14, 2024 • 2:00:59 pm (MT)

Region(s) of Delivery Alberta

Get Government Bids Like This by Email Receive daily bid alerts that match your keywords, business categories, and target regions.

View Sample Report Start Free Trial

Bow Valley Dump Station Flow Meter Installation

Description

See Also