BERTHOLF TECHNICAL SERVICES FOR INSPECTION AND CORRECTION CONTROL SYSTEM

Active

Contract Opportunity

THIS IS TO BE AWARDED SOLE SOURCE

TECHNICAL SERVICES FOR INSPECTION AND CORRECTION OF Woodward control system ON USCGC BERTHOLF

Background. Bertholf’s Woodward control panel is experiencing communication issues showing “#COM” that requires further troubleshooting by OEM. This requirement is for a qualified Woodward technician to inspect the Woodward control system and restore to normal operating condition.

1. Scope. The Contractor shall provide all personnel including, labor, materials, travel, parts, tools, test equipment, test fittings, supplies, consumables, and equipment to accomplish tasking. The Contractor shall provide the services of a qualified Tech Rep, who is familiar with the Woodward control system to accomplish all tasking. The Tech Rep will be responsible for the following:

• Advise on manufacturer's proprietary information pertinent to the system.


• Assist with proper repair methods, and ensure compliance with manufacturer's procedures and standards during disassembly, inspection, repair, modification, calibration, and reassembly of the equipment/system.

1. Objective. The objective of this requirement is to return the Woodward control system to normal operating condition.

1. Delivery. Contractor shall provide a final report within 3 days of contract period of performance.

1. Security Requirement. Base Alameda access is required. Vendor shall have a valid driver’s license and show identification. Forms will be provided for base access. A CG representative from the cutter may sponsor and escort vendor to the cutter.

1. Place of performance.

CGC BERTHOLF (WMSL 750)

1 Eagle Rd.

Alameda, CA 94501

1. Period of performance. TBD

1. Points of Contact.

USCG-SFLC-LRE PL Asset Management

MKCM Bryan Briggs

Bryan.P.Briggs@uscg.mil

(510) 418-2223

Attachments/Links