Benchtop Jacketed Laboratory Reactor System

Active

Contract Opportunity

*THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY*

Looking to source the same or similar benchtop jacketed laboratory reactor system with the following requirements:

Line Item 1: Reactor‑Ready Mini Starter

Minimum Technical Requirements:

• Modular benchtop reactor platform compatible with Reactor‑Ready Mini vessels


• Must support semi‑automated control through integration with digital controllers (e.g., AVA Pad)


• Chemical‑resistant construction suitable for laboratory use


• Must allow rapid vessel exchange and secure stirring assembly

Line Item 2: 250 mL Single Jacketed Mini Vessel Kit

Minimum Technical Requirements:

• 250 mL vessel capacity with single jacket for precise thermal control


• Compatible with Reactor‑Ready Mini system


• Must support automated or semi‑automated heating/cooling via external circulator


• Borosilicate or chemically resistant glass/jacket materials

Line Item 3: RS20 Control Mini Overhead Stirrer (US Plug)

Minimum Technical Requirements:

• Electronic overhead stirrer suitable for mini‑scale reactors


• Must provide digital speed control for semi‑automated operation


• US‑compatible electrical plug


• Capable of handling viscosities typical for research‑grade reactions

Line Item 4: AVA Pad Reactor Controller (US Plug)

Minimum Technical Requirements:

• Integrated reactor control system enabling semi‑automated operation of stirring, temperature, and process steps


• Touchpad interface for programming reaction parameters


• Must support automation of reaction profiles and data logging


• US‑compatible electrical plug

Line Item 5: M16x1 Insulated Hose, 150 cm

Minimum Technical Requirements:

• Hose length of 150 cm minimum for connection between vessel jacket and circulator


• M16x1 connector type


• Insulated to maintain thermal efficiency during semi‑automated temperature control


• Minimum 2 units required

Line Item 6: M16 PEEK Vessel Side Arm Connectors

Minimum Technical Requirements:

• Connector constructed from PEEK material for high chemical resistance


• Must fit M16 side‑arm ports on Reactor‑Ready vessels


• Supports automated fluid transfer and jacket circulation

Line Item 7: CC‑K6 with Pilot One, 4.5 L, 110–120 V

Minimum Technical Requirements:

• Heating/cooling circulator with 4.5 L capacity and 110–120 V power compatibility


• Must integrate with Reactor‑Ready Mini vessels for automated or semi‑automated temperature control


• Pilot One controller interface with programmable temperature profiles


• Stable, precise temperature regulation suitable for research‑grade reactions

Line Item 8: E‑Grade Professional

Minimum Technical Requirements:

• Software or accessory enabling enhanced automation and process control features


• Must support semi‑automated workflows


• Provides professional‑grade user interface and data functionality

Line Item 9: Connection Cable

Minimum Technical Requirements:

• Supports integrated/semi‑automated operation of controller and reactor components


• Durable insulation and lab‑safe materials

Line Item 10: Condenser Jacket Coil – Rodaviss B19 + GL14 + Fittings

Minimum Technical Requirements:

• Jacketed condenser coil compatible with Reactor‑Ready Mini system vessels


• Rodaviss B19 joint, GL14 fittings included


• Must support semi‑automated condensation and thermal control when paired with circulator


• Chemical‑resistant materials suitable for research‑grade reactions

Please review all applicable documentation and provide a proposal response no later than 3:00 PM CST September 11, 2026.

Within your proposal, please include a fully executed copy of the ANL-70 Request for Quotation, the ANL-70A Reps & Certs, and the country of origin.

Any questions can be directed to the Contracting Officer.

Thank you in advance for your participation.

Attachments/Links